A technician finds a coil of unlabelled metal wire. She clamps 3.0 m of it vertically, hangs a load of 100 N from it, and finds that it stretches by 1.5 mm. The cross-sectional area of the wire is . Using the Young's moduli in Table 8.1 (aluminium 70 GPa, copper 110 GPa, wrought iron 190 GPa, steel 200 GPa), what is the Young's modulus of the wire, and which metal is it most likely to be?
Competency-Based Questions (CBQ) · Question 3 of 80
A technician finds a coil of unlabelled metal wire.
Question 31 markMCQMedium
Select your answer
(A) , aluminium
(B) , none of the metals in the table
- Correct answer
(C) , steel
(D) , stiffer than any metal in the table
Option (C) is correct.
Explanation: Converting to SI units: , , and .
This is closest to the value for steel (200 GPa), so the wire is most likely steel.
(A) is wrong: it leaves out the length, taking instead of .
(B) is wrong: it uses the extension in millimetres (1.5) instead of metres ().
(D) is wrong: it takes the tension as because the wire is pulled at both ends (by the clamp and by the load). The tension at every cross-section of the wire is just , not .
