Option (B) is correct.
Explanation: The tension is F at every cross-section, but the area changes along the rod, so the stress and strain do too. Divide the rod into thin slices. At a distance x from the narrow end the radius is r=r1+(r2−r1)Lx, and a slice of thickness dx stretches by
d(ΔL)=πr2YFdx
Since dr=Lr2−r1dx, adding up all the slices gives
ΔL=πY(r2−r1)FL∫r1r2r2dr=πY(r2−r1)FL(r11−r21)=πYr1r2FL
ΔL=π×2.0×1011×1.0×10−3×2.0×10−3500×1.0=3.98×10−4 m
The rod stretches by 0.398 mm. The greatest stress, at the narrow end, is 500/(π×10−6)=1.59×108 Pa, below the yield strength of steel (250 MPa), so Hooke's law holds throughout.
(A) is wrong: 0.354 mm uses the mean radius, 1.5 mm, as if the rod were uniform; the thin parts stretch more than the mean-radius rod would, so the true extension is larger.
(C) is wrong: 0.796 mm uses the radius of the narrow end all along, as if the whole rod were as thin as its thinnest part.
(D) is wrong: 0.199 mm uses the radius of the wide end all along, as if the whole rod were as thick as its thickest part.