A student wants a steel wire whose extension is large enough to measure with a travelling microscope: at least 1.0 mm when a load of 50 N hangs from 2.0 m of wire. Young's modulus of steel is (Table 8.1). What condition must the diameter of the wire satisfy?
Competency-Based Questions (CBQ) · Question 11 of 80
A student wants a steel wire whose extension is large enough to measure with a travelling microscope: at least 1.0 mm…
- Correct answer
(A) It must be at most
(B) It must be at most
(C) It must be at least
(D) It must be at most
Option (A) is correct.
Explanation: The extension is . A thinner wire stretches more, so requires
At the limit the stress is , safely below steel's yield strength. Because steel's Young's modulus is so large, wires used to measure it must be long (the extension is proportional to ) and thin (it is inversely proportional to ); otherwise the extension would be too small to measure accurately with a travelling microscope.
(B) is wrong: is the largest allowed radius, not diameter.
(C) is wrong: it reverses the inequality; a thicker wire stretches less, so the diameter has an upper limit, not a lower one.
(D) is wrong: it takes the length as 1.0 m instead of 2.0 m.
