Option (B) is correct.
Explanation: For a small rise dt, the rod lengthens by dL=Lαldt. Since the total change is tiny compared with L, we may put L≈L0 and add up the small changes:
ΔL=L0∫0t(a+bt′)dt′=L0(at+2bt2)
ΔL=2.000×(1.0×10−5×120+22.0×10−8×1202)=2.000×(1.20×10−3+1.44×10−4)=2.69×10−3 m
so the rod grows by 2.69 mm. This is the same as using the average coefficient over the range, a+bt/2=1.12×10−5 K−1, in ΔL=L0αlΔT.
(A) is wrong: it uses the coefficient at 0 ∘C, 1.0×10−5 K−1, for the whole range, ignoring its rise with temperature.
(D) is wrong: it uses the coefficient at 120 ∘C, 1.24×10−5 K−1, for the whole range (equivalently, it leaves out the 21 in the integral); the coefficient is that large only at the end of the heating.
(C) is wrong: it multiplies by 3, as for a volume coefficient; a change of length needs the linear coefficient itself.