(a) At t=0 the excess temperature is 90−25=65 ∘C; at t=6.0 min it is 60−25=35 ∘C. Subtracting the two forms of the equation:
ln65−ln35=K×6.0⇒K=6.0ln(65/35)=6.00.619=0.103 min−1
K=0.103 min−1.
(b) At 40 ∘C the excess is 15 ∘C:
ln65−ln15=Kt⇒t=0.1032ln(65/15)=0.10321.466=14.2 min
The water reaches 40 ∘C about 14.2 min after it was left, that is, 8.2 min after it passed 60 ∘C. The second drop (20 °C) takes longer than the first (30 °C in 6.0 min) because the water is now closer to room temperature.
(c) First interval, 90→60 ∘C: average 75 ∘C, excess 50 ∘C:
6.030=K′×50⇒K′=0.10 min−1
Second interval, 60→40 ∘C: average 50 ∘C, excess 25 ∘C:
t220=0.10×25=2.5 ∘C min−1⇒t2=8.0 min
Total time =6.0+8.0=14.0 min.
The average method gives 14.0 min against 14.2 min from the exponential form, a gap of about 1.5 %. The average method is slightly off because the rate of cooling does not fall linearly with time within an interval; the intervals here are large (the first one removes almost half the excess temperature), so the exponential form is the more accurate one.