(a) 3 Ω — two resistors in parallel.
R1=61+61=62R=3 Ω
(b) 9 Ω — three resistors: one in series with a parallel pair.
Take the 3 Ω combination from part (a) and put a third resistor in series with it:
R=6+3=9 Ω
(c) 4 Ω — three resistors: one in parallel with a series pair.
First put two in series to make 6+6=12 Ω, then connect the third in parallel across that:
R1=61+121=122+121=123R=4 Ω
(Or using the product-over-sum rule for two resistances: R=6+126×12=1872=4 Ω.)
(d)
Rmax=nR=6n Ω(all in series)
Rmin=nR=n6 Ω(all in parallel)
Notice how parts (b) and (c) differ. Both use three resistors, and both mix series with parallel — but the order is opposite. In (b) the parallel pair is made first and a resistor is added in series; in (c) the series pair is made first and a resistor is added in parallel. Those two arrangements are not interchangeable, and they give 9 Ω and 4 Ω respectively.
Why this is harder than a network calculation. Being given a circuit and asked for its resistance has one route and one answer. Being given a target and asked to reach it means working backwards, and usually trying an arrangement, checking it, and adjusting. That is the skill an electrician actually needs, since real components come in fixed values.