(a) Before the fault:
P=RV2=402202=1210 W
After the fault only three quarters of the coil carries current, so R=43×40=30 Ω:
P′=302202≈1613 W
The power rises by about one third.
(b) A lower resistance on a fixed supply means a larger current: 30220≈7.3 A instead of 5.5 A. The remaining part of the coil now produces about 1613 W in a shorter length, so it runs much hotter than it was designed for and can melt, and the larger current overheats the cord and wiring. The heater still works, so the fault is easy to miss.