Confirming your payment

Skip to content

Competency-Based Questions (CBQ) · Question 53 of 80

A heater is to be made to work at 1100 W on a 220 V supply, using a heating alloy wire of resistivity 1.0 × 10^ -6 ,m…

Question 534 marksMedium

A heater is to be made to work at 1100 W1100\ \text{W} on a 220 V220\ \text{V} supply, using a heating alloy wire of resistivity 1.0×10−6 Ω m1.0 \times 10^{-6}\ \Omega\,\text{m} and area of cross-section 1.0×10−7 m21.0 \times 10^{-7}\ \text{m}^2.

(a) Find the resistance the element must have, and the length of wire needed. [2]

(b) The element runs too hot. The designer keeps 1100 W1100\ \text{W} on 220 V220\ \text{V} but uses wire of the same alloy with twice the area of cross-section. What length is needed now, and why does the new element run cooler? [2]