Opening your dashboard
Class 12 Physics Chapter 4 Magnetism And Matter: Previous Year Questions
37 questions on Chapter 4, each solved step by step. Class 12 Physics, CBSE 2026-27.
37 questions with solutions
1–5 marks · Mixed difficulty
- 11 mark
Question 1
If the magnetising field on a ferromagnetic material is increased, its permeability
Solve with AIAnswer
- Correct
(A) decreases
(B) increases
(C) remains unchanged
(D) first decreases and then increases
Option (A) is correct.
Explanation: Permeability is , with . In a ferromagnet the magnetisation comes from domains lining up. Once they are nearly all aligned, cannot grow any further: it saturates.

Beyond that point, increasing adds only to , so grows much more slowly than and the ratio falls. At very large , approaches .
- 21 mark
Question 2
A bar magnet has magnetic dipole moment . Its initial position is parallel to the direction of uniform magnetic field . In this position, the magnitudes of torque and force acting on it respectively are
Solve with AIAnswer
(A) and
(B) and
- Correct
(C) and
(D) and
Option (C) is correct.
Explanation:
- Torque: .
- Force: in a uniform field the forces on the two poles are equal and opposite, so the net force is zero whatever the orientation.

Option (D) looks different but here too. It is the general expression, not a value, and the question asks for the magnitudes in this position.
- 31 mark
Question 3
A rod when suspended in a uniform magnetic field aligns itself perpendicular to the magnetic field as shown below.

Which of the following statements is/are true for the rod?
(P) Every atom in the rod has a zero magnetic moment.
(Q) The rod is attracted when taken near the poles of a strong magnet.
(R) The relative permeability of the material of the rod is slightly less than 1.
(S) The susceptibility of the material of the rod is directly proportional to temperature.
Solve with AIAnswer
(A) only Q
- Correct
(B) only P and R
(C) only Q and S
(D) only R and S
Option (B) is correct.
Explanation: A rod that sets itself perpendicular to the field is diamagnetic. A diamagnetic body is pushed from stronger towards weaker field. Near the pole pieces the field is strongest at the pole faces, so the rod settles across the gap, with its ends away from them. (A paramagnetic rod would set itself along the field.)

- (P) True. In a diamagnetic material each atom has zero net magnetic moment. A moment appears only when a field is applied, and it is directed against the field.
- (Q) False. A diamagnetic body is repelled by the poles of a strong magnet.
- (R) True. is small and negative, so is slightly less than 1.
- (S) False. Diamagnetic susceptibility is practically independent of temperature. It is paramagnetic susceptibility that depends on temperature, and even that decreases as temperature rises.
- 41 mark
Question 4
The relative permeability of a substance X is slightly less than unity and that of substance Y is slightly more than unity, then
Solve with AIAnswer
(A) X is paramagnetic and Y is ferromagnetic
(B) X is diamagnetic and Y is ferromagnetic
(C) X and Y both are paramagnetic
- Correct
(D) X is diamagnetic and Y is paramagnetic
Option (D) is correct.
Explanation: .
- slightly below 1 means is small and negative: diamagnetic (X).
- slightly above 1 means is small and positive: paramagnetic (Y).

A ferromagnet has in the hundreds or thousands, not "slightly more than unity".
- 51 mark
Question 5
Which of the following has its permeability less than that of free space?
Solve with AIAnswer
- Correct
(A) Copper
(B) Aluminium
(C) Copper chloride
(D) Nickel
Option (A) is correct.
Explanation: Permeability less than means , i.e. : a diamagnetic substance.
- Copper: diamagnetic ( slightly below 1).
- Aluminium: paramagnetic.
- Copper chloride: paramagnetic (the ion has an unpaired electron).
- Nickel: ferromagnetic.

- 61 mark
Question 6
Which of the following cannot modify an external magnetic field as shown in the figure?
Solve with AIAnswer
- Correct
(A) Nickel
(B) Silicon
(C) Sodium chloride
(D) Copper
Option (A) is correct.
Explanation: In the figure the field lines bend away from the block, so fewer lines pass through it than through an equal area outside. This is diamagnetic behaviour ().

Silicon, sodium chloride and copper are all diamagnetic and would produce this pattern. Nickel is ferromagnetic. It would do the opposite, drawing the field lines strongly into itself.
- 71 mark
Question 7
A paramagnetic material is kept in a magnetic field. The field is increased till the magnetisation becomes saturated. If the temperature is now decreased, the magnetisation will
Solve with AIAnswer
(A) increase
(B) decrease
- Correct
(C) remain constant
(D) first increase and then decrease
Option (C) is correct.
Explanation: In a paramagnet the atomic dipoles tend to line up with the field, while thermal agitation keeps knocking them out of line. Lowering the temperature or raising the field both improve the alignment, until every dipole is aligned. That is saturation, with the largest magnetisation the material can have.

Once the magnetisation is saturated there is nothing left to align. Reducing the temperature further cannot increase it. It also has no reason to decrease, since cooling only reduces the agitation. The magnetisation stays constant.
- 81 mark
Question 8
The couple acting on a freely suspended magnetic needle in a uniform magnetic field is maximum when the angle between needle and field is
Solve with AIAnswer
(A)
(B)
- Correct
(C)
(D)
Option (C) is correct.
Explanation: The couple (torque) on the needle is

is largest at . At and the torque is zero: these are the positions of stable and unstable equilibrium.
- 91 mark
Question 9
Which of the following is NOT a property of diamagnetic materials?
Solve with AIAnswer
(A) Weak repulsion
(B) Negative susceptibility
(C) independent of temperature
- Correct
(D) High permeability
Option (D) is correct.
Explanation: Diamagnetic materials are weakly repelled by a magnet (A). They have a small negative (B), and their hardly changes with temperature (C).

Their permeability is slightly less than (), never high. High permeability belongs to ferromagnets.
- 101 mark
Question 10
Magnetic susceptibility of paramagnetic substances is
Solve with AIAnswer
(A) negative
(B) positive and temperature independent
- Correct
(C) positive and decreases with temperature
(D) positive and increases with temperature
Option (C) is correct.
Explanation: Paramagnetic atoms have permanent dipole moments. An applied field tends to line them up, which makes positive.
Thermal agitation works against this alignment. At a higher temperature the dipoles are knocked out of line more often, so for the same field the magnetisation, and hence , is smaller.

(Diamagnetic susceptibility is negative and almost temperature independent, which rules out options A and B.)
- 111 mark
Question 11
The magnetic dipole moment of a current loop increases if
Solve with AIAnswer
(A) area decreases
(B) current decreases
- Correct
(C) number of turns increases
(D) magnetic field increases
Option (C) is correct.
Explanation: For a current loop,

- (A) and (B): decreasing or decreases .
- (C): increasing increases . This is the correct option.
- (D): is a property of the loop itself. An external field acts on the loop (a torque) but does not change its moment.
- 121 mark
Question 12
The magnetic susceptibility of the material of a rod is 499. The permeability of vacuum is . The absolute permeability of the material of the rod is
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Explanation:

(A large positive like this means the rod is ferromagnetic.)
- 131 mark
Question 13
An iron bar of length has a magnetic moment . It is bent at the middle of its length such that the two arms make an angle with each other. The magnetic moment of the new magnet is
Solve with AIAnswer
- Correct
(A)
(B)
(C)
(D)
Option (A) is correct.
Explanation: The magnetic moment is (pole strength) × (straight-line distance between the poles). Bending does not change the pole strength . Originally the poles are apart, so .
After bending, each arm has length and the arms make . The poles and the bend form an equilateral triangle of side , so the poles are now apart.

- 141 mark
Question 14
The magnetic potential energy of a dipole in a uniform field is minimum when the dipole
Solve with AIAnswer
(A) is anti-parallel to
- Correct
(B) is parallel to
(C) is at to
(D) is perpendicular to
Option (B) is correct.
Explanation:

is least () when , i.e. parallel to . This is the position of stable equilibrium. Anti-parallel gives the maximum, .
- 151 mark
Question 15
A bar magnet is initially at right angles to a uniform magnetic field. The magnet is rotated till the torque acting on it becomes one-half of its initial value. The angle through which the bar magnet is rotated is
Solve with AIAnswer
(A) 30°
(B) 45°
- Correct
(C) 60°
(D) 75°
Option (C) is correct.
Explanation: The torque on a magnet of moment in a field is
where is the angle between the magnet and the field. At first , so the torque is the maximum value . For the torque to fall to half of this,
The magnet has turned from to with the field, that is, through . Option (A) gives the final angle with the field instead of the angle turned through.
- 161 mark
Question 16
A magnetised needle in a uniform magnetic field experiences a torque but no net force. An iron nail near a bar magnet, however, experiences a force of attraction in addition to a torque. Why?
Solve with AIWritten solution
Needle in a uniform field: the two poles of the needle feel equal and opposite forces, each. They cancel, giving no net force, but they form a couple, giving a torque.
Nail near a bar magnet: two things are different.
- The magnet induces magnetism in the iron nail, with the nail's near end becoming a pole opposite to the magnet's nearby pole.
- The field of a bar magnet is non-uniform: it is stronger closer to the magnet.

The nail's near pole is attracted by a stronger field than the far pole is repelled by, so the forces no longer cancel. The net force is an attraction, together with a torque that turns the nail along the field lines.
- 172 marks
Question 17
A uniform magnetic field gets modified as shown in the figure when two specimens A and B are placed in it.

(i) Identify the specimens A and B.
(ii) How is the magnetic susceptibility of specimen A different from that of specimen B?
Solve with AIWritten solution
(i)
- A: diamagnetic. The field lines are pushed out of the specimen, so the field inside is weaker than outside.
- B: paramagnetic. The field lines are drawn slightly into the specimen, so the field inside is a little stronger.

(ii) A has a small negative susceptibility (, slightly less than 1). B has a small positive susceptibility (, slightly more than 1).
- 182 marks
Question 18
Write the four important properties of the magnetic field lines due to a bar magnet.
Solve with AIWritten solution

- Magnetic field lines form continuous closed loops. Outside the magnet they run from N to S, and inside from S to N. They never start or end.
- The tangent to a field line at any point gives the direction of there.
- The closer together the lines, the stronger the field. They crowd near the poles and spread out far away.
- Two field lines never intersect. If they did, the field would have two directions at one point.
- 192 marks
Question 19
The susceptibility of a magnetic material is 0.9853. Identify the type of magnetic material. Draw the modification of the field pattern on keeping a piece of this material in a uniform magnetic field.
Solve with AIWritten solution
The susceptibility is positive, so the material is not diamagnetic. It is also less than 1, far below the very large values () of ferromagnets. The material is paramagnetic.
Its relative permeability is , greater than 1. So the field lines are drawn into the specimen, making the field inside stronger than outside:

Answer: paramagnetic.
- 202 marks
Question 20
Earth's magnetic field is assumed to be due to a small magnetic dipole located at its core. Considering the distance of either of the poles from the centre of the Earth to be about 6400 km and the measure of the Earth's magnetic field at the poles as T, what is the magnetic dipole moment of the assumed magnetic dipole?
Solve with AIWritten solution
Concept used — field of a short magnetic dipole on its axis
At a point on the axis of a magnetic dipole of moment , at a distance from its centre that is large compared with the size of the dipole, the field is
A magnetic pole of the Earth lies on the axis of the assumed dipole, and the dipole is tiny compared with the Earth's radius, so this short-dipole formula applies with equal to the Earth's radius.
Given: T at the pole, m, and T m A⁻¹.
To find: the dipole moment .
Step 1 — Make the subject. Multiply both sides of the axial-field formula by and divide by :
Step 2 — Cube the distance.
Step 3 — Substitute.

Answer: the dipole moment of the assumed dipole is about A m² (more precisely A m², also written J T⁻¹).
Note: use the axial formula ( in the numerator), not the equatorial one, because the pole lies along the dipole's axis. Using would give twice the correct moment.
- 213 marks
Question 21
A bar magnet of dipole moment rests with its centre on a frictionless pivot. A force is applied at right angles to the axis of the magnet, 10 cm from the pivot. It is observed that an external magnetic field of 0.25 T is required to hold the magnet in equilibrium at an angle of with the field. Calculate the value of . How will the equilibrium be affected if is withdrawn?
Solve with AIWritten solution

In equilibrium the torque of about the pivot balances the magnetic torque. The lever arm must be in metres, 10 cm = 0.10 m:
If is withdrawn, only the magnetic torque acts. It turns the magnet towards the field direction (, stable equilibrium). The pivot is frictionless, so the magnet overshoots and keeps oscillating about the field direction. With any damping it would come to rest aligned with .
Answer: N.
- 222 marks
Question 22
Why does a bar magnet not exist as an isolated north or south pole?
Solve with AIWritten solution
Every magnet is made of atomic magnetic dipoles, each of which has both poles.

If a bar magnet is cut in two, each piece gets a new north and south pole at the cut, and becomes a complete, smaller magnet. However finely it is cut, down to single atoms, each piece is still a dipole.
This is expressed by Gauss's law for magnetism: the net magnetic flux through any closed surface is zero. A surface around one "pole" would enclose a net source of field lines, giving non-zero flux, and that never happens. Magnetic field lines are closed loops. Isolated poles (monopoles) do not exist.
- 233 marks
Question 23
Derive the expression for the torque acting on a rectangular current loop of area placed in a uniform magnetic field . Show that where is the magnetic moment of the current loop given by .
Solve with AIWritten solution
Take a rectangular loop ABCD (sides = BC = DA and = AB = CD) carrying current , with the normal to its plane at an angle to . Sides BC and DA are perpendicular to .

- Sides AB and CD: equal forces in opposite directions along the same line (the axis of rotation). They cancel and give no torque.
- Sides BC and DA: each feels , in opposite directions. These forces act along different lines and form a couple. The perpendicular distance between them is .
Vector form. Let along the normal. The torque is perpendicular to both and , with magnitude :
The net force on the loop is zero. It tends only to turn, so that lines up with .
- 243 marks
Question 24
Two identical magnetic dipoles each of magnetic dipole moment are placed with their axes perpendicular to each other with a distance of separation m between them, as shown.

Find the magnetic field at the point that is midway along the distance of separation between the two dipoles.
Solve with AIWritten solution
The midpoint P is m from each dipole.
- P lies on the equatorial line of dipole 1 (P is on its perpendicular bisector). There the field is opposite to :
- P lies on the axis of dipole 2. There the field is along :
The two dipoles are perpendicular, so :

at to the direction of .
- 253 marks
Question 25
Three identical specimens of magnetic materials, nickel, antimony and aluminium, are kept in a non-uniform magnetic field. Draw the modification in the field lines in each case. Justify your answer.
Solve with AIWritten solution
Nickel is ferromagnetic, aluminium is paramagnetic, and antimony is diamagnetic.

- Nickel (, very large): the field lines are drawn strongly into the specimen and crowd through it. It is strongly magnetised along the field and is pulled towards the stronger part of the field.
- Aluminium ( small, positive): the lines are drawn slightly into it. It is weakly magnetised along the field and moves slowly towards the stronger region.
- Antimony ( small, negative): the lines are pushed out of it. It is magnetised opposite to the field and moves towards the weaker part of the field.
Justification: the field inside a specimen is . concentrates the lines, slightly more than 1 concentrates them a little, and expels them.
- 263 marks
Question 26
What are ferromagnetic materials? Explain ferromagnetism with the help of suitable diagrams, using the concept of magnetic domain.
Solve with AIWritten solution
Ferromagnetic materials are substances that become strongly magnetised in the direction of an external magnetic field when placed in it, for example iron, cobalt and nickel. Their susceptibility is large and positive.
Magnetic domains: in a ferromagnetic material, the atomic magnetic moments interact strongly and line up with one another over small regions called domains. Each domain (typically up to about 1 mm across, containing a very large number of atoms) is fully magnetised, with all its atomic moments pointing the same way.

(i) No external field: the directions of magnetisation of the different domains are random, so their effects cancel and the material as a whole shows little or no magnetisation.
(ii) External field applied: the domains orient themselves along the field (domains already aligned with it grow, and the others rotate towards it). The magnetic moments of all the domains now add up, so the material becomes strongly magnetised in the direction of the field.
- 272 marks
Question 27
The susceptibility of a magnetic material is . Name the type of magnetic material it represents and state two of its properties.
Solve with AIWritten solution
A small, negative susceptibility means the material is diamagnetic.

Properties (any two):
- It is weakly repelled by a magnet. In a non-uniform field it moves from the stronger to the weaker region.
- Its relative permeability is slightly less than 1 (), so field lines are pushed out of it.
- Its atoms have no permanent magnetic moment. An applied field induces a moment opposite to itself.
- Its susceptibility is practically independent of temperature.
- 282 marks
Question 28
Why do paramagnetic substances show greater magnetisation at lower temperatures?
Solve with AIWritten solution
A paramagnetic substance has atoms with permanent magnetic moments. With no field applied they point in random directions. An applied field tends to line them up, which produces the magnetisation.

Thermal agitation fights this: the random motion of the atoms keeps knocking the dipoles out of alignment. At a lower temperature the agitation is weaker, so a larger fraction of the dipoles stays lined up with the field and the magnetisation is greater. Given a strong enough field and a low enough temperature, all of them line up and the magnetisation saturates.
- 292 marks
Question 29
Why can't two magnetic field lines intersect?
Solve with AIWritten solution
The tangent to a field line at a point gives the direction of the magnetic field there.

If two lines crossed at a point, there would be two tangents there, and the field would have two different directions at the same point. That is impossible: the net field at any point has one definite direction. So field lines never intersect.
- 302 marks
Question 30
A bar magnet is cut into two equal halves along its length. How do the pole strength and magnetic moment of each piece change?
Solve with AIWritten solution
Cutting along the length (lengthwise) splits the magnet into two thinner magnets:
- each piece keeps the full length ;
- each has half the cross-section, and hence half the pole strength: .

Answer: the pole strength and the magnetic moment of each piece are both halved. (If the magnet were cut across its length instead, the pole strength would stay the same and the length would halve, but the moment would again be halved.)
- 315 marks
Question 31
(a) Show that a current carrying solenoid behaves like a small bar magnet. Obtain the expression for the magnetic field at an external point lying on its axis.
(b) A steady current of 2 A flows through a circular coil having 5 turns of radius 7 cm. The coil lies in the X-Y plane with its centre at the origin. Find the magnitude and direction of the magnetic dipole moment of the coil.
Solve with AIWritten solution
(a) A current-carrying solenoid behaves like a bar magnet
Concept used — field on the axis of a circular coil, and the dipole field
A circular coil of radius carrying current produces, at a point on its axis a distance from its centre,
A solenoid is a stack of such coils, so its axial field is the sum of the fields of all its turns. If that sum turns out to be , the solenoid has the same axial field as a bar magnet of moment .
Step 1 — Set up. Take a solenoid of length , radius , turns per unit length and current . Let P be a point on its axis at distance from its centre O.

Step 2 — Field of one thin slice. A slice of thickness at distance from O contains turns and acts as a circular coil. P lies on its axis at distance , so
Step 3 — Far point approximation. For a point far away ( and ), every slice has , so and
Step 4 — Add the slices. Integrate from one end () to the other ():
Step 5 — Bring in the magnetic moment. The solenoid has turns, each of area , so its magnetic moment is
Multiply the numerator and denominator of the result of Step 4 by :
Answer (a): the axial field of the solenoid at a far point is with . This is exactly the axial field of a bar magnet of moment , so a current-carrying solenoid behaves like a bar magnet, with its magnetic moment along its axis. (Like a bar magnet it also sets itself along an external field when freely suspended.)
(b) Magnetic moment of the coil
Concept used — magnetic moment of a current coil
directed along the normal to the plane of the coil, given by the right-hand thumb rule (curl the fingers along the current; the thumb gives ).
Given: , A, radius m.
Step 1 — Area of the coil.
Step 2 — Magnetic moment.
Step 3 — Direction. The coil lies in the - plane, so its normal is the -axis. If the current flows anticlockwise as seen from the side, points along ; if clockwise, along .
Answer (b): A m² (J T⁻¹), directed along the -axis, perpendicular to the plane of the coil.
- 325 marks
Question 32
Define the term magnetic dipole moment. Derive an expression for magnetic field intensity due to a magnetic dipole
(i) at a point on its axis and
(ii) at a point on its equator.
Solve with AIWritten solution
Magnetic dipole moment: for a magnet whose poles have strength and are a distance apart, the magnetic dipole moment is
directed from the S pole to the N pole. Its SI unit is A m² (J T⁻¹). (For a current loop, .)
Concept used — field of a single pole
By analogy with Coulomb's law, a pole of strength produces at distance a field
directed away from a N pole and towards a S pole. The field of the dipole is the vector sum of the fields of its two poles.
(i) Point on the axis
Step 1 — Distances. Let P be on the axis, at distance from the centre O, beyond the N pole. Then P is from N and from S.

Step 2 — Fields of the two poles. Both act along the axis: the N pole's field points away from N (along ), the S pole's field points towards S (against ).
Step 3 — Net field. P is nearer N, so and the net field is along :
Step 4 — Combine the fractions. Over the common denominator , the numerator is
so
Step 5 — Short dipole. For , :
Answer (i): , directed along .
(ii) Point on the equator
Step 1 — Distances. Let P be on the perpendicular bisector of the magnet, at distance from O. By Pythagoras' theorem, each pole is from P.

Step 2 — Fields of the two poles. The two fields have the same magnitude
The N pole's field points away from N and the S pole's field towards S.
Step 3 — Resolve. Let be the angle each field makes with the direction parallel to the axis. The components perpendicular to the axis are equal and opposite, so they cancel. The components parallel to the axis both point from the N end towards the S end, so they add. From the right triangle formed by O, P and a pole,
Step 4 — Net field.
Step 5 — Short dipole. For , :
Answer (ii): , directed opposite to .
Note: at the same large distance the axial field is twice the equatorial field, and the two point in opposite directions relative to .
- 335 marks
Question 33
(a) Write any three properties of diamagnetic, paramagnetic and ferromagnetic materials.
(b) Explain Curie's law of magnetisation and write the formula.
Solve with AIWritten solution
(a)
Property Diamagnetic Paramagnetic Ferromagnetic Susceptibility small, negative small, positive large, positive () Relative permeability slightly less than 1 slightly more than 1 very large (hundreds to thousands) In a non-uniform field moves to weaker field (repelled) moves to stronger field (weakly attracted) moves strongly to stronger field Atomic dipoles none permanent; induced opposite to permanent, randomly oriented permanent, aligned in domains 
(b) The magnetisation of a paramagnetic material increases with the applied field and decreases as the temperature rises, because thermal agitation disturbs the alignment of the atomic dipoles. For fields that are not too strong, the magnetisation is directly proportional to the applied field and inversely proportional to the absolute temperature. This is Curie's law:
where is a constant for the material (the Curie constant). Doubling the absolute temperature halves the susceptibility. (Only the qualitative behaviour is in the current NCERT chapter.)
- 345 marks
Question 34
Derive the expression for torque experienced by a magnetic dipole in a uniform magnetic field. Also define:
(a) magnetic dipole moment,
(b) magnetic potential energy of a dipole.
Solve with AIWritten solution
Torque. A magnet with poles of strength , separated by , makes an angle with a uniform field . The N pole feels a force along , and the S pole an equal force against .

The two forces are equal and opposite, so the net force is zero. They act along different lines, a perpendicular distance apart, and so form a couple:
The torque tends to turn the magnet into line with the field.
(a) Magnetic dipole moment: , directed from the S pole to the N pole. Its SI unit is A m² (J T⁻¹). It equals the torque on the dipole when it is perpendicular to a unit field.
(b) Magnetic potential energy: the work done by an external agent in turning the dipole slowly from the reference orientation to :
- 353 marks
Question 35
A bar magnet of magnetic moment is aligned at with a uniform external magnetic field of 0.44 T. Calculate (a) the work done in turning the magnet to align its magnetic moment (i) normal to the magnetic field, (ii) opposite to the magnetic field, and (b) the torque on the magnet in the final orientation in case (ii).
Solve with AIWritten solution
The work done by an external agent turning the magnet slowly from to is the rise in potential energy:
(a)(i) :
(a)(ii) :

(b) At : . The magnet is in (unstable) equilibrium.
- 361 mark
Question 36
Assertion (A): The poles of a bar magnet cannot be separated.
Reason (R): Magnetic monopoles do not exist.
Solve with AIAnswer
- Correct
(A) Both assertion (A) and reason (R) are true and reason (R) is the correct explanation of assertion (A).
(B) Both assertion (A) and reason (R) are true but reason (R) is not the correct explanation of assertion (A).
(C) Assertion (A) is true but reason (R) is false.
(D) Assertion (A) is false but reason (R) is true.
Option (A) is correct.
Explanation: Cutting a magnet never isolates a pole. Each piece develops a new N and S pole at the cut and is again a complete dipole.

The reason is that there are no magnetic monopoles, which Gauss's law for magnetism expresses: the net magnetic flux through every closed surface is zero, so field lines have no sources or sinks. Since isolated poles do not exist, the poles of a magnet cannot be separated. R explains A.
- 371 mark
Question 37
Assertion (A): Diamagnetic substances exhibit magnetism.
Reason (R): Diamagnetic materials do not have permanent magnetic dipole moment.
Solve with AIAnswer
(A) Both assertion (A) and reason (R) are true and reason (R) is the correct explanation of assertion (A).
- Correct
(B) Both assertion (A) and reason (R) are true but reason (R) is not the correct explanation of assertion (A).
(C) Assertion (A) is true but reason (R) is false.
(D) Assertion (A) is false but reason (R) is true.
Option (B) is correct.
Explanation: A is true. A diamagnetic substance becomes (weakly) magnetised in a field, opposite to the field, and is repelled by a magnet.
R is true. Its atoms have no permanent magnetic moment: the electrons' moments cancel in pairs.

But R does not explain A. The magnetism comes from something else: when a field is applied, the electrons' orbital motion is altered so that the atom acquires an induced moment opposite to the field. The absence of a permanent moment is why the induced effect is not masked, but it is not the cause of the magnetism.
