Confirming your payment

Skip to content

Opening your dashboard

Class 12 Chemistry Chapter 3 Chemical Kinetics: Previous Year Questions

37 questions on Chapter 3, each solved step by step. Class 12 Chemistry, CBSE 2026-27.

37 questions with solutions

1–5 marks · Mixed difficulty

The first 32 solutions are on this page. This chapter is a long one, so the rest open on their own page to keep this one quick to load.

  1. 1

    Question 1

    The slope in the plot of log⁡[R]\log [R] vs. time for a first order reaction is:

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) +k2.303+\dfrac{k}{2.303}

    • (B) −k-k

    • (C) −k2.303-\dfrac{k}{2.303}

      Correct
    • (D) +k+k

    Option (C) is correct.

    Explanation: The integrated rate equation of a first order reaction is

    k=2.303tlog⁡[R]0[R]k = \frac{2.303}{t}\log\frac{[R]_0}{[R]}

    Rearranging it into the form of a straight line, y=mx+cy = mx + c:

    log⁡[R]=(−k2.303)t+log⁡[R]0\log [R] = \left(-\frac{k}{2.303}\right)t + \log [R]_0

    So when log⁡[R]\log [R] is plotted on the y-axis against tt on the x-axis, the graph is a straight line with slope =−k/2.303= -k/2.303 and intercept =log⁡[R]0= \log [R]_0. The slope is negative because [R][R] falls with time.

    Class 12 Chemistry Chemical Kinetics

    In the figure ([R]0=1.0[R]_0 = 1.0 M, k=0.05 min−1k = 0.05\ \text{min}^{-1}), log⁡[R]\log[R] falls by 0.4340.434 in 2020 min, so the slope is −0.434/20=−0.0217 min−1-0.434/20 = -0.0217\ \text{min}^{-1}, which is exactly −0.05/2.303-0.05/2.303.

    • (A) +k/2.303+k/2.303 is the slope of log⁡([R]0/[R])\log([R]_0/[R]) vs tt, a line that rises with time, not of log⁡[R]\log[R] vs tt.
    • (B) −k-k is the slope of ln⁡[R]\ln[R] vs tt (natural log), or of [R][R] vs tt for a zero order reaction.
    • (D) +k+k would mean the concentration increases with time, which is impossible for a reactant.
  2. 2

    Question 2

    For the reaction 3A→2B3\text{A} \rightarrow 2\text{B}, the rate of reaction +d[B]dt+\dfrac{d[\text{B}]}{dt} is equal to:

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) −32d[A]dt-\dfrac{3}{2}\dfrac{d[\text{A}]}{dt}

    • (B) −23d[A]dt-\dfrac{2}{3}\dfrac{d[\text{A}]}{dt}

      Correct
    • (C) −13d[A]dt-\dfrac{1}{3}\dfrac{d[\text{A}]}{dt}

    • (D) +2d[A]dt+2\dfrac{d[\text{A}]}{dt}

    Option (B) is correct.

    Explanation: For a reaction with unequal coefficients, each rate of change is divided by its stoichiometric coefficient so that all of them give the same rate of reaction:

    Rate=−13d[A]dt=+12d[B]dt\text{Rate} = -\frac{1}{3}\frac{d[\text{A}]}{dt} = +\frac{1}{2}\frac{d[\text{B}]}{dt}

    Multiplying both sides by 2:

    d[B]dt=−23d[A]dt\frac{d[\text{B}]}{dt} = -\frac{2}{3}\frac{d[\text{A}]}{dt}

    This makes physical sense: 3 mol of A are used up for every 2 mol of B formed, so B appears at only 2/32/3 of the speed at which A disappears. The minus sign is needed because d[A]/dtd[\text{A}]/dt is negative while d[B]/dtd[\text{B}]/dt is positive.

    Class 12 Chemistry Chemical Kinetics

    • (A) −32d[A]dt-\frac{3}{2}\frac{d[\text{A}]}{dt} inverts the ratio; it would make B form faster than A is consumed.
    • (C) −13d[A]dt-\frac{1}{3}\frac{d[\text{A}]}{dt} is the rate of reaction itself, which equals 12d[B]dt\frac{1}{2}\frac{d[\text{B}]}{dt}, not d[B]dt\frac{d[\text{B}]}{dt}.
    • (D) has the wrong sign (it would be negative) and the wrong factor.
  3. 3

    Question 3

    If the initial concentration of substance A is 1.5 M and after 120 seconds the concentration of A is 0.75 M, calculate the rate constant for the reaction if it follows zero order kinetics.

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) 0.00625 mol L−1 s−10.00625\ \text{mol L}^{-1}\text{ s}^{-1}

      Correct
    • (B) 0.00625 s−10.00625\ \text{s}^{-1}

    • (C) 0.00578 mol L−1 s−10.00578\ \text{mol L}^{-1}\text{ s}^{-1}

    • (D) 0.00578 s−10.00578\ \text{s}^{-1}

    Option (A) is correct.

    Explanation: The integrated rate equation for a zero order reaction is

    [A]=[A]0−kt⇒k=[A]0−[A]t[A] = [A]_0 - kt \quad\Rightarrow\quad k = \frac{[A]_0 - [A]}{t}

    Substituting [A]0=1.5[A]_0 = 1.5 M, [A]=0.75[A] = 0.75 M and t=120t = 120 s:

    k=1.5−0.75120=0.75120=0.00625 mol L−1 s−1k = \frac{1.5 - 0.75}{120} = \frac{0.75}{120} = \mathbf{0.00625\ \text{mol L}^{-1}\text{ s}^{-1}}

    For a zero order reaction, rate =k[A]0=k= k[A]^0 = k, so kk has the same unit as rate: mol L−1 s−1\text{mol L}^{-1}\text{ s}^{-1}.

    Class 12 Chemistry Chemical Kinetics

    • (B) has the right number but the unit s−1\text{s}^{-1}, which belongs to a first order rate constant.
    • (C) and (D): 0.005780.00578 is 0.693/1200.693/120, the value obtained by wrongly treating the reaction as first order (the concentration halves in 120 s, so 120 s would be the first order half-life). The question clearly states zero order.
  4. 4

    Question 4

    Which of the following statements is true?

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Molecularity of a reaction can be zero or a fraction.

    • (B) Molecularity has no meaning for complex reactions.

      Correct
    • (C) Molecularity of a reaction is an experimental quantity.

    • (D) Reactions with molecularity three are very rare but are fast.

    Option (B) is correct.

    Explanation: Molecularity is the number of reacting species (atoms, ions or molecules) that must collide simultaneously in an elementary (single-step) reaction. A complex reaction takes place in several elementary steps, each with its own molecularity, so the overall reaction has no single meaningful molecularity. For a complex reaction, the rate is decided by the slowest step, and it is the order (found by experiment) that describes it.

    • (A) is false: molecularity counts colliding species, so it is always a whole number (1, 2 or 3). It can never be zero or a fraction. Order can be zero or a fraction.
    • (C) is false: molecularity is a theoretical quantity, written from the balanced elementary step. It is order that is found experimentally.
    • (D) is false: termolecular reactions are rare and slow, because the chance of three particles colliding at the same instant with enough energy and the right orientation is very small.
  5. 5

    Question 5

    What is the order and molecularity of hydrolysis of sucrose if the rate law is Rate =k′[C12H22O11]= k'[\text{C}_{12}\text{H}_{22}\text{O}_{11}]?

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Order is zero, molecularity is one.

    • (B) Order is two, molecularity is two.

    • (C) Order is two, molecularity is one.

    • (D) Order is one, molecularity is two.

      Correct

    Option (D) is correct.

    Explanation: The inversion of cane sugar is

    C12H22O11+H2O→H+C6H12O6 (glucose)+C6H12O6 (fructose)\text{C}_{12}\text{H}_{22}\text{O}_{11} + \text{H}_2\text{O} \xrightarrow{\text{H}^+} \text{C}_6\text{H}_{12}\text{O}_6\ (\text{glucose}) + \text{C}_6\text{H}_{12}\text{O}_6\ (\text{fructose})

    • Molecularity = 2: two species, one sucrose molecule and one water molecule, take part in the reaction.
    • Order = 1: water is the solvent and is present in such a large excess that its concentration hardly changes. It is absorbed into the constant, k′=k[H2O]k' = k[\text{H}_2\text{O}], so the observed rate law is Rate =k′[C12H22O11]1= k'[\text{C}_{12}\text{H}_{22}\text{O}_{11}]^1, which is first order.

    Such a reaction is called a pseudo first order reaction.

    • (A) is wrong: the rate clearly depends on [sucrose][\text{sucrose}], so the order is not zero, and two species react, so molecularity is not one.
    • (B) would be true only if water's concentration also appeared in the rate law. It does not, because water is in excess.
    • (C) reverses the two quantities.
  6. 6

    Question 6

    An archaeologist found that the percentage of carbon-14 in a wooden artifact was 20%20\% of what carbon-14 would have been in the wood when it was cut from the tree. What would be the approximate age of this wooden artifact? (Given: half-life of carbon-14 = 5730 years)

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) 5,790 years

    • (B) 12,060 years

    • (C) 13,300 years

      Correct
    • (D) 38,000 years

    Option (C) is correct.

    Explanation: Radioactive decay follows first order kinetics.

    Step 1: rate constant from the half-life

    k=0.693t1/2=0.6935730=1.209×10−4 year−1k = \frac{0.693}{t_{1/2}} = \frac{0.693}{5730} = 1.209 \times 10^{-4}\ \text{year}^{-1}

    Step 2: time for C-14 to fall to 20%. Take [R]0=100[R]_0 = 100 and [R]=20[R] = 20:

    t=2.303klog⁡[R]0[R]=2.3031.209×10−4log⁡10020=2.303×0.69901.209×10−4t = \frac{2.303}{k}\log\frac{[R]_0}{[R]} = \frac{2.303}{1.209 \times 10^{-4}}\log\frac{100}{20} = \frac{2.303 \times 0.6990}{1.209 \times 10^{-4}}

    t≈1.33×104 years≈13,300 yearst \approx 1.33 \times 10^{4}\ \text{years} \approx \mathbf{13{,}300\ years}

    Quick check: after 2 half-lives (11,460 years) 25% would remain, and after 3 half-lives (17,190 years) 12.5% would remain. 20% lies between them, a little past 2 half-lives.

    Class 12 Chemistry Chemical Kinetics

    • (A) 5,790 years is about one half-life, when 50% would remain, not 20%.
    • (B) 12,060 years would leave about 23% of the C-14.
    • (D) 38,000 years is more than 6 half-lives and would leave only about 1%.
  7. 7

    Question 7

    The slope in the plot of [R][R] vs time for a zero order reaction is:

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) +k2.303+\dfrac{k}{2.303}

    • (B) −k-k

      Correct
    • (C) −k2.303-\dfrac{k}{2.303}

    • (D) +k+k

    Option (B) is correct.

    Explanation: The integrated rate equation of a zero order reaction is

    [R]=−kt+[R]0[R] = -kt + [R]_0

    This is the equation of a straight line, y=mx+cy = mx + c, with y=[R]y = [R], x=tx = t, slope m=−km = -k and intercept c=[R]0c = [R]_0. The concentration falls by the same amount, kk, in every unit of time, so the graph is a straight line sloping downward.

    Class 12 Chemistry Chemical Kinetics

    For a first order reaction, the [R][R] vs tt plot is a curve, not a straight line. It becomes a straight line only when ln⁡[R]\ln[R] or log⁡[R]\log[R] is plotted instead.

    • (A) +k/2.303+k/2.303 is the slope of log⁡([R]0/[R])\log([R]_0/[R]) vs tt for a first order reaction.
    • (C) −k/2.303-k/2.303 is the slope of log⁡[R]\log[R] vs tt for a first order reaction.
    • (D) +k+k would mean the reactant concentration increases with time.
  8. 8

    Question 8

    Assertion (A): For a zero order reaction, the unit of rate constant and the unit of rate of reaction are the same.

    Reason (R): Rate of reaction for a zero order reaction is independent of the concentration of the reactant.

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Both A and R are true and R is the correct explanation of A.

      Correct
    • (B) Both A and R are true but R is not the correct explanation of A.

    • (C) A is true but R is false.

    • (D) A is false but R is true.

    Option (A) is correct.

    Explanation:

    Reason is true. For a zero order reaction, the rate law is

    Rate=k[R]0=k\text{Rate} = k[R]^0 = k

    The concentration term is raised to the power zero, so the rate does not depend on [R][R] at all.

    Assertion is true. Since Rate =k= k exactly, kk must have the same unit as rate:

    k=mol L−1 s−1k = \text{mol L}^{-1}\text{ s}^{-1}

    For every other order, the concentration term carries units, and they change the unit of kk. For example, a first order kk is in s−1\text{s}^{-1} and a second order kk is in L mol−1 s−1\text{L mol}^{-1}\text{ s}^{-1}. The general unit is (mol L−1)1−n s−1(\text{mol L}^{-1})^{1-n}\text{ s}^{-1}, which becomes mol L−1 s−1\text{mol L}^{-1}\text{ s}^{-1} only for n=0n = 0.

    R explains A. The units are the same because the rate does not depend on concentration: with no concentration term, rate and kk are identical. So (A) is the answer, not (B).

  9. 9

    Question 9

    Assertion (A): The half-life of a reaction is the time in which the concentration of the reactant is reduced to one half of its initial concentration.

    Reason (R): In first order kinetics, when the concentration of the reactant is doubled, its half-life is doubled.

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Both A and R are true and R is the correct explanation of A.

    • (B) Both A and R are true but R is not the correct explanation of A.

    • (C) A is true but R is false.

      Correct
    • (D) A is false but R is true.

    Option (C) is correct.

    Explanation:

    Assertion is true. This is the definition of half-life, t1/2t_{1/2}. It applies to a reaction of any order.

    Reason is false. For a first order reaction,

    t1/2=0.693kt_{1/2} = \frac{0.693}{k}

    [R]0[R]_0 does not appear in this expression, so the half-life is independent of the initial concentration. Doubling [R]0[R]_0 leaves t1/2t_{1/2} unchanged.

    Class 12 Chemistry Chemical Kinetics

    The statement in R describes a zero order reaction, where t1/2=[R]02kt_{1/2} = \dfrac{[R]_0}{2k}. There, doubling [R]0[R]_0 does double the half-life.

  10. 10

    Question 10

    Assertion (A): Order of reaction is applicable to elementary as well as complex reactions.

    Reason (R): For a complex reaction, molecularity has no meaning.

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Both A and R are true and R is the correct explanation of A.

    • (B) Both A and R are true but R is not the correct explanation of A.

      Correct
    • (C) A is true but R is false.

    • (D) A is false but R is true.

    Option (B) is correct.

    Explanation:

    Assertion is true. Order is the sum of the powers of the concentration terms in the experimentally determined rate law. Any reaction, whether single-step or multi-step, has a measurable rate law, so every reaction has an order.

    Reason is true. Molecularity is the number of species colliding simultaneously in one elementary step. A complex reaction is a sequence of several elementary steps, so the overall reaction has no single molecularity. Only its individual steps have one.

    Why R does not explain A: A holds because order comes from experiment, and an experiment can be done on any reaction. R is a statement about a different quantity, molecularity, and its limits. Knowing that molecularity fails for complex reactions tells us nothing about why order works for them. Both statements are true, but they are independent facts.

  11. 11

    Question 11

    Assertion (A): Hydrolysis of an ester follows first order kinetics.

    Reason (R): Concentration of water remains nearly constant during the course of the reaction.

    MCQHardAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) Both A and R are true and R is the correct explanation of A.

      Correct
    • (B) Both A and R are true but R is not the correct explanation of A.

    • (C) A is true but R is false.

    • (D) A is false but R is true.

    Option (A) is correct.

    Explanation: Acid hydrolysis of ethyl acetate is

    CH3COOC2H5+H2O→H+CH3COOH+C2H5OH\text{CH}_3\text{COOC}_2\text{H}_5 + \text{H}_2\text{O} \xrightarrow{\text{H}^+} \text{CH}_3\text{COOH} + \text{C}_2\text{H}_5\text{OH}

    The true rate law contains both reactants:

    Rate=k[CH3COOC2H5][H2O]\text{Rate} = k[\text{CH}_3\text{COOC}_2\text{H}_5][\text{H}_2\text{O}]

    Reason is true. Water is the solvent and is present in a very large excess. For example, 0.01 mol of ester in about 55 mol of water uses up far less than 1% of the water, so [H2O][\text{H}_2\text{O}] stays practically constant.

    Assertion is true, and R explains it. Because [H2O][\text{H}_2\text{O}] is constant, it can be absorbed into the rate constant:

    Rate=k′[CH3COOC2H5],k′=k[H2O]\text{Rate} = k'[\text{CH}_3\text{COOC}_2\text{H}_5], \qquad k' = k[\text{H}_2\text{O}]

    The reaction therefore behaves as first order, and is called a pseudo first order reaction. It is first order because water's concentration does not change, so R is the correct explanation of A.

  12. 12

    Question 12

    A certain reaction is 50% complete in 20 minutes at 300 K, and the same reaction is 50% complete in 5 minutes at 350 K. Calculate the activation energy if it is a first order reaction.

    (Given: R=8.314 J K−1 mol−1R = 8.314\ \text{J K}^{-1}\text{ mol}^{-1}, log⁡4=0.602\log 4 = 0.602)

    MCQHardAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) 24.2 kJ mol−124.2\ \text{kJ mol}^{-1}

      Correct
    • (B) 2.42 kJ mol−12.42\ \text{kJ mol}^{-1}

    • (C) 0 kJ mol−10\ \text{kJ mol}^{-1}

    • (D) 240.2 kJ mol−1240.2\ \text{kJ mol}^{-1}

    Option (A) is correct.

    Explanation: For a first order reaction, the time for 50% completion is the half-life, and k=0.693/t1/2k = 0.693/t_{1/2}.

    Step 1: rate constants

    k1=0.69320=0.03465 min−1 (300 K),k2=0.6935=0.1386 min−1 (350 K)k_1 = \frac{0.693}{20} = 0.03465\ \text{min}^{-1}\ (300\ \text{K}), \qquad k_2 = \frac{0.693}{5} = 0.1386\ \text{min}^{-1}\ (350\ \text{K})

    k2k1=205=4\frac{k_2}{k_1} = \frac{20}{5} = 4

    Step 2: Arrhenius equation

    log⁡k2k1=Ea2.303R(1T1−1T2)=Ea2.303R(T2−T1T1T2)\log\frac{k_2}{k_1} = \frac{E_a}{2.303R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right) = \frac{E_a}{2.303R}\left(\frac{T_2 - T_1}{T_1T_2}\right)

    0.602=Ea2.303×8.314(50300×350)0.602 = \frac{E_a}{2.303 \times 8.314}\left(\frac{50}{300 \times 350}\right)

    Step 3: solve

    Ea=0.602×2.303×8.314×10500050=24206 J mol−1≈24.2 kJ mol−1E_a = \frac{0.602 \times 2.303 \times 8.314 \times 105000}{50} = 24206\ \text{J mol}^{-1} \approx \mathbf{24.2\ kJ\ mol^{-1}}

    Class 12 Chemistry Chemical Kinetics

    • (B) 2.422.42 and (D) 240.2 kJ mol−1240.2\ \text{kJ mol}^{-1} are each a factor of 10 away from the correct value (one too small, one too large). They come from slips in the powers of ten, for example in the J to kJ conversion or in 105000/50=2100105000/50 = 2100.
    • (C) 00 would mean the rate does not change with temperature, but here the rate becomes 4 times faster.
  13. 13

    Question 13

    For a zero order reaction, the slope in the plot of [R][R] vs. time is:

    (where [R][R] is the concentration of the reactant at time tt)

    MCQHardAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) −k2.303\dfrac{-k}{2.303}

    • (B) −k-k

      Correct
    • (C) +k2.303\dfrac{+k}{2.303}

    • (D) +k+k

    Option (B) is correct.

    Explanation: For a zero order reaction, −d[R]dt=k-\dfrac{d[R]}{dt} = k. Integrating from t=0t = 0, when the concentration is [R]0[R]_0, to time tt gives

    [R]=−kt+[R]0[R] = -kt + [R]_0

    Compare this with y=mx+cy = mx + c:

    • y=[R]y = [R] and x=tx = t
    • slope m=−km = \mathbf{-k}
    • intercept c=[R]0c = [R]_0

    Class 12 Chemistry Chemical Kinetics

    The concentration drops by the same amount in every equal interval of time, so the plot is a straight line with a negative slope of magnitude kk.

    • (A) −k/2.303-k/2.303 is the slope of log⁡[R]\log[R] vs tt for a first order reaction.
    • (C) +k/2.303+k/2.303 is the slope of log⁡([R]0/[R])\log([R]_0/[R]) vs tt for a first order reaction.
    • (D) +k+k has the wrong sign, because the reactant is used up and not produced.
  14. 14

    Question 14

    The unit of rate constant depends upon the:

    MCQMediumAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) molecularity of the reaction.

    • (B) activation energy of the reaction.

    • (C) order of the reaction.

      Correct
    • (D) temperature of the reaction.

    Option (C) is correct.

    Explanation: For a reaction whose rate law is Rate =k[A]x[B]y= k[\text{A}]^x[\text{B}]^y, the order is n=x+yn = x + y. Rate has the unit of concentration per time, e.g. mol L−1 s−1\text{mol L}^{-1}\text{ s}^{-1}, so

    k=Rate[A]x[B]y=mol L−1 s−1(mol L−1)n=(mol L−1)1−n s−1k = \frac{\text{Rate}}{[\text{A}]^x[\text{B}]^y} = \frac{\text{mol L}^{-1}\text{ s}^{-1}}{(\text{mol L}^{-1})^{n}} = (\text{mol L}^{-1})^{1-n}\text{ s}^{-1}

    The power 1−n1 - n depends only on the order nn:

    Order nnUnit of kk
    0mol L−1 s−1\text{mol L}^{-1}\text{ s}^{-1}
    1s−1\text{s}^{-1}
    2L mol−1 s−1\text{L mol}^{-1}\text{ s}^{-1}
    • (A) is wrong: molecularity is a theoretical count for an elementary step. The exponents in the rate law come from experiment, and they can differ from the molecularity, as in pseudo first order reactions.
    • (B) and (D) change the value of kk through k=Ae−Ea/RTk = Ae^{-E_a/RT}, but they do not change its unit.
  15. 15

    Question 15

    In a chemical reaction X→Y\text{X} \rightarrow \text{Y}, it is found that the rate of reaction doubles when the concentration of X is increased four times. The order of the reaction with respect to X is:

    MCQHardAsked 2020
    1 mark
    Solve with AI
    Answer
    • (A) 1

    • (B) 0

    • (C) 2

    • (D) 12\dfrac{1}{2}

      Correct

    Option (D) is correct.

    Explanation: Let the rate law be Rate =k[X]n= k[\text{X}]^n. Take the ratio of the new rate to the old rate:

    r′r=k(4[X])nk[X]n=4n\frac{r'}{r} = \frac{k(4[\text{X}])^n}{k[\text{X}]^n} = 4^n

    The rate doubles, so

    4n=2⇒(22)n=21⇒2n=1⇒n=124^n = 2 \quad\Rightarrow\quad (2^2)^n = 2^1 \quad\Rightarrow\quad 2n = 1 \quad\Rightarrow\quad n = \frac{1}{2}

    The rate is proportional to the square root of the concentration: Rate =k[X]1/2= k[\text{X}]^{1/2}.

    Class 12 Chemistry Chemical Kinetics

    Check the other options by predicting the new rate when [X][\text{X}] becomes 4 times larger:

    • (A) order 1: the rate would become 41=44^1 = 4 times.
    • (B) order 0: the rate would not change at all (40=14^0 = 1).
    • (C) order 2: the rate would become 42=164^2 = 16 times.
  16. 16

    Question 16

    A certain reaction is 50% complete in 20 minutes at 300 K, and the same reaction is 50% complete in 5 minutes at 350 K. Calculate the activation energy if it is a first order reaction.

    (Given: R=8.314 J K−1 mol−1R = 8.314\ \text{J K}^{-1}\text{ mol}^{-1}, log⁡4=0.602\log 4 = 0.602)

    HardAsked 2025
    3 marks
    Solve with AI
    Written solution

    Step 1: rate constants from the half-lives. For a first order reaction, the time for 50% completion is the half-life, and it does not depend on concentration:

    k=0.693t1/2k = \frac{0.693}{t_{1/2}}

    k1 (300 K)=0.69320 min=0.03465 min−1k_1\ (300\ \text{K}) = \frac{0.693}{20\ \text{min}} = 0.03465\ \text{min}^{-1}

    k2 (350 K)=0.6935 min=0.1386 min−1k_2\ (350\ \text{K}) = \frac{0.693}{5\ \text{min}} = 0.1386\ \text{min}^{-1}

    k2k1=0.13860.03465=4\frac{k_2}{k_1} = \frac{0.1386}{0.03465} = 4

    (The ratio of the rate constants is simply the inverse ratio of the half-lives, 20/520/5.)

    Step 2: Arrhenius equation for two temperatures

    log⁡k2k1=Ea2.303R(T2−T1T1T2)\log\frac{k_2}{k_1} = \frac{E_a}{2.303R}\left(\frac{T_2 - T_1}{T_1T_2}\right)

    log⁡4=Ea2.303×8.314(350−300300×350)\log 4 = \frac{E_a}{2.303 \times 8.314}\left(\frac{350 - 300}{300 \times 350}\right)

    0.602=Ea19.147×501050000.602 = \frac{E_a}{19.147} \times \frac{50}{105000}

    Step 3: solve for EaE_a

    Ea=0.602×19.147×10500050=24206 J mol−1E_a = \frac{0.602 \times 19.147 \times 105000}{50} = 24206\ \text{J mol}^{-1}

    Ea≈24.2 kJ mol−1\mathbf{E_a \approx 24.2\ kJ\ mol^{-1}}

    Class 12 Chemistry Chemical Kinetics

    Check with the graph: on a plot of ln⁡k\ln k against 1/T1/T, the two points lie on a straight line of slope −Ea/R=−2911-E_a/R = -2911 K, and 2911×8.314=24200 J mol−12911 \times 8.314 = 24200\ \text{J mol}^{-1}, which is the same answer.

  17. 17

    Question 17

    Define rate constant.

    HardAsked 2015
    1 mark
    Solve with AI
    Written solution

    Rate constant (kk): the proportionality constant in the rate law of a reaction. It is equal to the rate of the reaction when the concentration of each reactant is unity (1 mol L−11\ \text{mol L}^{-1}). For this reason it is also called the specific reaction rate.

    For a reaction with rate law

    Rate=k[A]x[B]y\text{Rate} = k[\text{A}]^x[\text{B}]^y

    putting [A]=[B]=1 mol L−1[\text{A}] = [\text{B}] = 1\ \text{mol L}^{-1} gives Rate =k= k.

    Key points:

    • kk has a fixed value for a given reaction at a given temperature. It changes with temperature (k=Ae−Ea/RTk = Ae^{-E_a/RT}) and in the presence of a catalyst.
    • Its unit depends on the order nn: (mol L−1)1−n s−1(\text{mol L}^{-1})^{1-n}\text{ s}^{-1}.
  18. 18

    Question 18

    Define half-life period of a reaction.

    HardAsked 2015
    1 mark
    Solve with AI
    Written solution

    Half-life period (t1/2t_{1/2}): the time in which the concentration of a reactant is reduced to one half of its initial concentration.

    at t=t1/2:[R]=[R]02\text{at } t = t_{1/2}: \qquad [R] = \frac{[R]_0}{2}

    Class 12 Chemistry Chemical Kinetics

    Its value depends on the order of the reaction:

    • Zero order: t1/2=[R]02kt_{1/2} = \dfrac{[R]_0}{2k}, which is proportional to the initial concentration.
    • First order: t1/2=0.693kt_{1/2} = \dfrac{0.693}{k}, which is independent of the initial concentration. That is why every successive half-life in the figure is equal.
  19. 19

    Question 19

    What is the effect of adding a catalyst on

    (i) activation energy (EaE_a), and

    (ii) Gibbs energy (ΔG\Delta G) of a reaction?

    MediumAsked 2017
    1 mark
    Solve with AI
    Written solution

    (i) Activation energy: decreases. A catalyst provides an alternative pathway (a different mechanism) with a lower energy barrier. More molecules now have the energy needed to react, so the rate increases.

    (ii) Gibbs energy: no change. ΔG\Delta G is a state function and depends only on the energies of the reactants and products, which a catalyst does not alter. A catalyst therefore cannot make a non-spontaneous reaction spontaneous, and it does not change the equilibrium constant. It only helps the reaction reach equilibrium sooner.

    Class 12 Chemistry Chemical Kinetics

  20. 20

    Question 20

    (a) For the reaction 2N2O5(g)→4NO2(g)+O2(g)2\text{N}_2\text{O}_5(g) \rightarrow 4\text{NO}_2(g) + \text{O}_2(g) at 318 K, calculate the rate of reaction if the rate of disappearance of N2O5(g)\text{N}_2\text{O}_5(g) is 1.4×10−3 mol L−1 s−11.4 \times 10^{-3}\ \text{mol L}^{-1}\text{ s}^{-1}.

    (b) For a first order reaction, derive the relationship t99%=2 t90%t_{99\%} = 2\,t_{90\%}.

    HardAsked 2023
    3 marks
    Solve with AI
    Written solution

    (a) For 2N2O5→4NO2+O22\text{N}_2\text{O}_5 \rightarrow 4\text{NO}_2 + \text{O}_2, each rate of change is divided by its coefficient:

    Rate=−12d[N2O5]dt=+14d[NO2]dt=+d[O2]dt\text{Rate} = -\frac{1}{2}\frac{d[\text{N}_2\text{O}_5]}{dt} = +\frac{1}{4}\frac{d[\text{NO}_2]}{dt} = +\frac{d[\text{O}_2]}{dt}

    The rate of disappearance of N2O5\text{N}_2\text{O}_5 is −d[N2O5]dt=1.4×10−3 mol L−1 s−1-\dfrac{d[\text{N}_2\text{O}_5]}{dt} = 1.4 \times 10^{-3}\ \text{mol L}^{-1}\text{ s}^{-1}, so

    Rate=12×1.4×10−3=7.0×10−4 mol L−1 s−1\text{Rate} = \frac{1}{2} \times 1.4 \times 10^{-3} = \mathbf{7.0 \times 10^{-4}\ mol\ L^{-1}\ s^{-1}}

    (b) For a first order reaction,

    t=2.303klog⁡[R]0[R]t = \frac{2.303}{k}\log\frac{[R]_0}{[R]}

    99% completion: 1% of the reactant is left, so [R]0[R]=1001=100\dfrac{[R]_0}{[R]} = \dfrac{100}{1} = 100.

    t99%=2.303klog⁡100=2.303×2k=4.606kt_{99\%} = \frac{2.303}{k}\log 100 = \frac{2.303 \times 2}{k} = \frac{4.606}{k}

    90% completion: 10% of the reactant is left, so [R]0[R]=10010=10\dfrac{[R]_0}{[R]} = \dfrac{100}{10} = 10.

    t90%=2.303klog⁡10=2.303kt_{90\%} = \frac{2.303}{k}\log 10 = \frac{2.303}{k}

    Dividing the two results:

    t99%t90%=4.606/k2.303/k=2⇒t99%=2 t90%\frac{t_{99\%}}{t_{90\%}} = \frac{4.606/k}{2.303/k} = 2 \quad\Rightarrow\quad \mathbf{t_{99\%} = 2\,t_{90\%}}

    Class 12 Chemistry Chemical Kinetics

    In words, a first order reaction takes the same time, 2.303/k2.303/k, to cut the reactant down by each factor of 10: from 100% to 10%, and again from 10% to 1%.

  21. 21

    Question 21

    The half-life of a sample A (t1/2=100t_{1/2} = 100 days) did not change with the concentration of A. The half-life of another sample B (t1/2=120t_{1/2} = 120 days) decreases with decrease in concentration of B.

    If the initial concentration of both the samples was 1 M, what will be their rate constants?

    HardAsked 2023
    3 marks
    Solve with AI
    Written solution

    Sample A: first order. Its half-life does not change with concentration. A half-life independent of [R]0[R]_0 is the signature of a first order reaction, for which t1/2=0.693/kt_{1/2} = 0.693/k.

    kA=0.693t1/2=0.693100 days=6.93×10−3 day−1k_A = \frac{0.693}{t_{1/2}} = \frac{0.693}{100\ \text{days}} = \mathbf{6.93 \times 10^{-3}\ day^{-1}}

    Sample B: zero order. Its half-life falls as the concentration falls, so t1/2t_{1/2} is proportional to [R]0[R]_0. This is the signature of a zero order reaction, for which t1/2=[R]02kt_{1/2} = \dfrac{[R]_0}{2k}.

    kB=[R]02 t1/2=1 mol L−12×120 days=4.17×10−3 mol L−1 day−1k_B = \frac{[R]_0}{2\,t_{1/2}} = \frac{1\ \text{mol L}^{-1}}{2 \times 120\ \text{days}} = \mathbf{4.17 \times 10^{-3}\ mol\ L^{-1}\ day^{-1}}

    Class 12 Chemistry Chemical Kinetics

    The units confirm the orders: a first order kk has the unit time−1\text{time}^{-1}, while a zero order kk has the unit concentration time−1\text{concentration time}^{-1}.

  22. 22

    Question 22

    A first order reaction is 50%50\% complete in 30 minutes at 300 K and in 10 minutes at 320 K. Calculate the activation energy (EaE_a) for the reaction.

    (Given: R=8.314 J K−1 mol−1R = 8.314\ \text{J K}^{-1}\text{ mol}^{-1}, log⁡2=0.3010\log 2 = 0.3010, log⁡3=0.4771\log 3 = 0.4771, log⁡4=0.6021\log 4 = 0.6021)

    HardAsked 2023
    3 marks
    Solve with AI
    Written solution

    Step 1: rate constants. For a first order reaction, 50% completion takes one half-life, and k=0.693/t1/2k = 0.693/t_{1/2}.

    k1 (300 K)=0.69330 min=0.0231 min−1k_1\ (300\ \text{K}) = \frac{0.693}{30\ \text{min}} = 0.0231\ \text{min}^{-1}

    k2 (320 K)=0.69310 min=0.0693 min−1k_2\ (320\ \text{K}) = \frac{0.693}{10\ \text{min}} = 0.0693\ \text{min}^{-1}

    k2k1=0.06930.0231=3\frac{k_2}{k_1} = \frac{0.0693}{0.0231} = 3

    (Only the ratio is needed, so the time unit cancels. It must simply be the same for both values.)

    Step 2: Arrhenius equation

    log⁡k2k1=Ea2.303R(T2−T1T1T2)\log\frac{k_2}{k_1} = \frac{E_a}{2.303R}\left(\frac{T_2 - T_1}{T_1T_2}\right)

    log⁡3=Ea2.303×8.314(320−300300×320)\log 3 = \frac{E_a}{2.303 \times 8.314}\left(\frac{320 - 300}{300 \times 320}\right)

    0.4771=Ea19.147×20960000.4771 = \frac{E_a}{19.147} \times \frac{20}{96000}

    Step 3: solve

    Ea=0.4771×19.147×9600020=43848 J mol−1E_a = \frac{0.4771 \times 19.147 \times 96000}{20} = 43848\ \text{J mol}^{-1}

    Ea≈43.8 kJ mol−1\mathbf{E_a \approx 43.8\ kJ\ mol^{-1}}

    Class 12 Chemistry Chemical Kinetics

  23. 23

    Question 23

    For a chemical reaction R→PR \rightarrow P, the variation of ln⁡[R]\ln[R] with time (t)(t) is given below:

    Class 12 Chemistry Chemical Kinetics

    For this reaction:

    (i) Predict the order of reaction.

    (ii) What is the unit of the rate constant (kk)?

    HardAsked 2017
    2 marks
    Solve with AI
    Written solution

    (i) First order. The integrated rate equation of a first order reaction is

    ln⁡[R]=−kt+ln⁡[R]0\ln[R] = -kt + \ln[R]_0

    This has the form y=mx+cy = mx + c, with y=ln⁡[R]y = \ln[R] and x=tx = t. So a plot of ln⁡[R]\ln[R] against tt is a straight line with slope −k-k and intercept ln⁡[R]0\ln[R]_0, which is exactly the graph given. A zero order reaction would give a straight line for [R][R] vs tt instead.

    (ii) For a first order reaction, Rate =k[R]= k[R], so

    k=Rate[R]=mol L−1 s−1mol L−1=s−1k = \frac{\text{Rate}}{[R]} = \frac{\text{mol L}^{-1}\text{ s}^{-1}}{\text{mol L}^{-1}} = \mathbf{s^{-1}}

    In general, the unit of kk is time−1\text{time}^{-1} (s−1\text{s}^{-1}, min−1\text{min}^{-1} or h−1\text{h}^{-1}). It is independent of the concentration unit.

  24. 24

    Question 24

    Define rate constant and give the mathematical relation between rate constant and half-life period for a first order reaction.

    HardAsked 2020
    2 marks
    Solve with AI
    Written solution

    Rate constant (kk): the proportionality constant in the rate law. It equals the rate of the reaction when the concentration of each reactant is unity (1 mol L−11\ \text{mol L}^{-1}), and is also called the specific reaction rate. For a first order reaction, Rate =k[R]= k[R].

    Relation with half-life (first order). The integrated rate equation is

    k=2.303tlog⁡[R]0[R]k = \frac{2.303}{t}\log\frac{[R]_0}{[R]}

    At t=t1/2t = t_{1/2}, [R]=[R]0/2[R] = [R]_0/2:

    k=2.303t1/2log⁡[R]0[R]0/2=2.303t1/2log⁡2=2.303×0.3010t1/2k = \frac{2.303}{t_{1/2}}\log\frac{[R]_0}{[R]_0/2} = \frac{2.303}{t_{1/2}}\log 2 = \frac{2.303 \times 0.3010}{t_{1/2}}

    t1/2=0.693k\mathbf{t_{1/2} = \frac{0.693}{k}}

    The half-life of a first order reaction is therefore independent of the initial concentration and inversely proportional to the rate constant.

  25. 25

    Question 25

    A first order reaction takes 69.3 min for 50%50\% completion. What is the time needed for 80%80\% of the reaction to get completed?

    (Given: log⁡5=0.6990\log 5 = 0.6990, log⁡8=0.9030\log 8 = 0.9030, log⁡2=0.3010\log 2 = 0.3010)

    HardAsked 2023
    2 marks
    Solve with AI
    Written solution

    Step 1: rate constant. 50% completion takes one half-life, so t1/2=69.3t_{1/2} = 69.3 min.

    k=0.693t1/2=0.69369.3 min=0.01 min−1k = \frac{0.693}{t_{1/2}} = \frac{0.693}{69.3\ \text{min}} = 0.01\ \text{min}^{-1}

    Step 2: time for 80% completion. 20% of the reactant is left, so [R]0[R]=10020=5\dfrac{[R]_0}{[R]} = \dfrac{100}{20} = 5.

    t=2.303klog⁡[R]0[R]=2.3030.01log⁡5t = \frac{2.303}{k}\log\frac{[R]_0}{[R]} = \frac{2.303}{0.01}\log 5

    t=230.3×0.6990=160.98 mint = 230.3 \times 0.6990 = 160.98\ \text{min}

    t≈161 min\mathbf{t \approx 161\ min}

    Class 12 Chemistry Chemical Kinetics

    Check: two half-lives (138.6 min) would leave 25%. Reaching 20% must take a little longer than that, and 161 min fits.

  26. 26

    Question 26

    (a) Radioactive decay follows first order kinetics. The initial amount of each of two radioactive elements X and Y is 1 g. What will be the ratio of X and Y after two days if their half-lives are 12 hours and 16 hours respectively?

    (b) The hypothetical reaction P+Q→R\text{P} + \text{Q} \rightarrow \text{R} is half order with respect to P and zero order with respect to Q. What is the unit of the rate constant for this reaction?

    HardAsked 2023
    2 marks
    Solve with AI
    Written solution

    (a) For first order decay, the amount left after nn half-lives is

    N=N0(12)n,n=tt1/2N = N_0\left(\frac{1}{2}\right)^n, \qquad n = \frac{t}{t_{1/2}}

    Two days =48= 48 h.

    Element X (t1/2=12t_{1/2} = 12 h): n=48/12=4n = 48/12 = 4

    NX=1×(12)4=116 g=0.0625 gN_X = 1 \times \left(\frac{1}{2}\right)^4 = \frac{1}{16}\ \text{g} = 0.0625\ \text{g}

    Element Y (t1/2=16t_{1/2} = 16 h): n=48/16=3n = 48/16 = 3

    NY=1×(12)3=18 g=0.125 gN_Y = 1 \times \left(\frac{1}{2}\right)^3 = \frac{1}{8}\ \text{g} = 0.125\ \text{g}

    NXNY=1/161/8=12⇒X:Y=1:2\frac{N_X}{N_Y} = \frac{1/16}{1/8} = \frac{1}{2} \quad\Rightarrow\quad \mathbf{X : Y = 1 : 2}

    Class 12 Chemistry Chemical Kinetics

    (b) The rate law is

    Rate=k[P]1/2[Q]0=k[P]1/2\text{Rate} = k[\text{P}]^{1/2}[\text{Q}]^0 = k[\text{P}]^{1/2}

    so the overall order is n=12n = \frac{1}{2}.

    k=Rate[P]1/2=mol L−1 s−1(mol L−1)1/2=mol1/2 L−1/2 s−1k = \frac{\text{Rate}}{[\text{P}]^{1/2}} = \frac{\text{mol L}^{-1}\text{ s}^{-1}}{(\text{mol L}^{-1})^{1/2}} = \mathbf{mol^{1/2}\ L^{-1/2}\ s^{-1}}

    This agrees with the general unit (mol L−1)1−n s−1(\text{mol L}^{-1})^{1-n}\text{ s}^{-1} with 1−n=121 - n = \frac{1}{2}.

  27. 27

    Question 27

    A first order reaction takes 30 minutes for 20%20\% decomposition. Calculate t1/2t_{1/2}.

    (Given: log⁡2=0.3010\log 2 = 0.3010)

    HardAsked 2019
    2 marks
    Solve with AI
    Written solution

    Step 1: fraction left. After 20% decomposition, 80% remains, so [R]0[R]=10080=1.25\dfrac{[R]_0}{[R]} = \dfrac{100}{80} = 1.25.

    Using only the given value of log⁡2\log 2:

    log⁡1.25=log⁡108=log⁡10−3log⁡2=1−0.9030=0.0970\log 1.25 = \log\frac{10}{8} = \log 10 - 3\log 2 = 1 - 0.9030 = 0.0970

    Step 2: rate constant

    k=2.303tlog⁡[R]0[R]=2.30330 min×0.0970=7.45×10−3 min−1k = \frac{2.303}{t}\log\frac{[R]_0}{[R]} = \frac{2.303}{30\ \text{min}} \times 0.0970 = 7.45 \times 10^{-3}\ \text{min}^{-1}

    Step 3: half-life

    t1/2=0.693k=0.6937.45×10−3 min−1t_{1/2} = \frac{0.693}{k} = \frac{0.693}{7.45 \times 10^{-3}\ \text{min}^{-1}}

    t1/2≈93.1 min\mathbf{t_{1/2} \approx 93.1\ min}

    Class 12 Chemistry Chemical Kinetics

    (With more exact logarithms the answer is 93.2 min. The small difference comes only from rounding the log values.)

  28. 28

    Question 28

    A first order reaction takes 20 minutes for 25%25\% decomposition. Calculate the time when 75%75\% of the reaction will be completed.

    (Given: log⁡2=0.3010\log 2 = 0.3010, log⁡3=0.4771\log 3 = 0.4771, log⁡4=0.6021\log 4 = 0.6021)

    HardAsked 2017
    3 marks
    Solve with AI
    Written solution

    Step 1: rate constant. After 25% decomposition, 75% remains, so [R]0[R]=10075=43\dfrac{[R]_0}{[R]} = \dfrac{100}{75} = \dfrac{4}{3}.

    k=2.30320 minlog⁡43=2.30320(log⁡4−log⁡3)k = \frac{2.303}{20\ \text{min}}\log\frac{4}{3} = \frac{2.303}{20}(\log 4 - \log 3)

    k=2.30320(0.6021−0.4771)=2.303×0.125020=1.44×10−2 min−1k = \frac{2.303}{20}(0.6021 - 0.4771) = \frac{2.303 \times 0.1250}{20} = 1.44 \times 10^{-2}\ \text{min}^{-1}

    Step 2: time for 75% completion. 25% remains, so [R]0[R]=10025=4\dfrac{[R]_0}{[R]} = \dfrac{100}{25} = 4.

    t=2.303klog⁡4=2.303×0.60211.44×10−2 min−1t = \frac{2.303}{k}\log 4 = \frac{2.303 \times 0.6021}{1.44 \times 10^{-2}\ \text{min}^{-1}}

    t≈96.3 min\mathbf{t \approx 96.3\ min}

    Class 12 Chemistry Chemical Kinetics

    Check without computing kk: for the same reaction, t75%t25%=log⁡4log⁡(4/3)=0.60210.1250=4.82\dfrac{t_{75\%}}{t_{25\%}} = \dfrac{\log 4}{\log(4/3)} = \dfrac{0.6021}{0.1250} = 4.82, so t=4.82×20=96.3t = 4.82 \times 20 = 96.3 min.

  29. 29

    Question 29

    Observe the graph shown below and answer the following questions:

    Class 12 Chemistry Chemical Kinetics

    (a) What is the order of the reaction?

    (b) What is the slope of the curve?

    (c) Write the relationship between kk and t1/2t_{1/2} (half-life period).

    HardAsked 2021
    3 marks
    Solve with AI
    Written solution

    (a) First order. The integrated rate equation of a first order reaction is

    k=2.303tlog⁡[R]0[R]⇒log⁡[R]0[R]=k2.303 tk = \frac{2.303}{t}\log\frac{[R]_0}{[R]} \quad\Rightarrow\quad \log\frac{[R]_0}{[R]} = \frac{k}{2.303}\,t

    A plot of log⁡([R]0/[R])\log([R]_0/[R]) against tt is therefore a straight line passing through the origin, which is exactly the graph given.

    (b) Comparing with y=mxy = mx:

    slope=+k2.303\textbf{slope} = \mathbf{+\frac{k}{2.303}}

    The slope is positive because [R]0/[R][R]_0/[R] grows as the reactant is used up.

    (c) Put t=t1/2t = t_{1/2} and [R]=[R]0/2[R] = [R]_0/2:

    log⁡2=k2.303 t1/2⇒t1/2=0.693k\log 2 = \frac{k}{2.303}\,t_{1/2} \quad\Rightarrow\quad \mathbf{t_{1/2} = \frac{0.693}{k}}

  30. 30

    Question 30

    The graphs below show the variation of concentration of reactants with time for two different reactions. What are the orders of the reactions respectively?

    Class 12 Chemistry Chemical Kinetics

    HardAsked 2019
    2 marks
    Solve with AI
    Written solution

    Reaction I: zero order. A plot of [R][R] against tt is a straight line with a negative slope. This matches the zero order integrated rate equation:

    [R]=−kt+[R]0(slope=−k, intercept=[R]0)[R] = -kt + [R]_0 \qquad (\text{slope} = -k,\ \text{intercept} = [R]_0)

    Reaction II: first order. A plot of ln⁡[R]\ln[R] against tt is a straight line with a negative slope. This matches the first order integrated rate equation:

    ln⁡[R]=−kt+ln⁡[R]0(slope=−k, intercept=ln⁡[R]0)\ln[R] = -kt + \ln[R]_0 \qquad (\text{slope} = -k,\ \text{intercept} = \ln[R]_0)

    Answer: zero order and first order respectively.

  31. 31

    Question 31

    (a) A first order reaction is 25%25\% complete in 40 minutes. Calculate the value of the rate constant. In what time will the reaction be 80%80\% completed?

    (b) Define order of reaction. Write the condition under which a bimolecular reaction follows first order kinetics.

    HardAsked 2020
    5 marks
    Solve with AI
    Written solution

    (a) Rate constant. After 25% completion, 75% remains, so [R]0[R]=10075\dfrac{[R]_0}{[R]} = \dfrac{100}{75}.

    k=2.303tlog⁡[R]0[R]=2.30340log⁡43=2.30340(0.6021−0.4771)k = \frac{2.303}{t}\log\frac{[R]_0}{[R]} = \frac{2.303}{40}\log\frac{4}{3} = \frac{2.303}{40}(0.6021 - 0.4771)

    k=2.303×0.125040=7.20×10−3 min−1k = \frac{2.303 \times 0.1250}{40} = \mathbf{7.20 \times 10^{-3}\ min^{-1}}

    Time for 80% completion. 20% remains, so [R]0[R]=5\dfrac{[R]_0}{[R]} = 5.

    t=2.303klog⁡5=2.303×0.69907.20×10−3t = \frac{2.303}{k}\log 5 = \frac{2.303 \times 0.6990}{7.20 \times 10^{-3}}

    t≈224 min\mathbf{t \approx 224\ min}

    Class 12 Chemistry Chemical Kinetics

    (b) Order of reaction: the sum of the powers of the concentration terms of the reactants in the experimentally determined rate law. For Rate =k[A]x[B]y= k[\text{A}]^x[\text{B}]^y, the order is x+yx + y. It can be zero, a whole number or a fraction.

    Condition for first order behaviour: a bimolecular reaction follows first order kinetics when one of the two reactants is present in large excess, so that its concentration stays practically constant during the reaction. Such a reaction is called a pseudo first order reaction.

    Example: acid hydrolysis of ethyl acetate in water.

    CH3COOC2H5+H2O→H+CH3COOH+C2H5OH\text{CH}_3\text{COOC}_2\text{H}_5 + \text{H}_2\text{O} \xrightarrow{\text{H}^+} \text{CH}_3\text{COOH} + \text{C}_2\text{H}_5\text{OH}

    Rate=k[ester][H2O]=k′[ester],k′=k[H2O]\text{Rate} = k[\text{ester}][\text{H}_2\text{O}] = k'[\text{ester}], \qquad k' = k[\text{H}_2\text{O}]

  32. 32

    Question 32

    (i) A first order reaction is 75%75\% completed in 40 minutes. Calculate its t1/2t_{1/2}.

    (ii) Predict the order of the reaction in the given plots:

    (a)

    Class 12 Chemistry Chemical Kinetics

    (b)

    Class 12 Chemistry Chemical Kinetics

    where [R]0[R]_0 is the initial concentration of reactant.

    (Given: log⁡2=0.3010\log 2 = 0.3010, log⁡4=0.6021\log 4 = 0.6021)

    HardAsked 2019
    5 marks
    Solve with AI
    Written solution

    (i) After 75% completion, 25% remains, so [R]0[R]=10025=4\dfrac{[R]_0}{[R]} = \dfrac{100}{25} = 4.

    k=2.303tlog⁡[R]0[R]=2.30340log⁡4=2.303×0.602140=0.0347 min−1k = \frac{2.303}{t}\log\frac{[R]_0}{[R]} = \frac{2.303}{40}\log 4 = \frac{2.303 \times 0.6021}{40} = 0.0347\ \text{min}^{-1}

    t1/2=0.693k=0.6930.0347 min−1≈20 mint_{1/2} = \frac{0.693}{k} = \frac{0.693}{0.0347\ \text{min}^{-1}} \approx \mathbf{20\ min}

    Shortcut: 75% completion (100% → 50% → 25%) takes exactly two half-lives, so t1/2=40/2=20t_{1/2} = 40/2 = 20 min.

    (ii)(a) First order. The half-life does not change with [R]0[R]_0, giving a horizontal line. This matches t1/2=0.693kt_{1/2} = \dfrac{0.693}{k}, which contains no concentration term.

    (ii)(b) Zero order. The half-life is directly proportional to [R]0[R]_0, giving a straight line through the origin. This matches t1/2=[R]02kt_{1/2} = \dfrac{[R]_0}{2k}.

  33. 33

    Question 33

    (a) A first order reaction is 50% completed in 45 minutes at 300 K and in 15 minutes at 330 K. Calculate the activation energy (EaE_a) for the reaction. (R=8.314 J K−1 mol−1R = 8.314\ \text{J K}^{-1}\text{ mol}^{-1})

    (b) Write the two conditions for collisions to be effective collisions.

    (c) How do order of reaction and molecularity differ towards a complex reaction?

    (Given: log⁡2=0.3010\log 2 = 0.3010, log⁡3=0.4771\log 3 = 0.4771, log⁡4=0.6021\log 4 = 0.6021, log⁡5=0.6990\log 5 = 0.6990)

    HardAsked 2020
    5 marks
  34. 34

    Question 34

    The following initial rate data were obtained for the reaction:

    2NO(g)+Br2(g)→2NOBr(g)2\text{NO}(g) + \text{Br}_2(g) \rightarrow 2\text{NOBr}(g)

    Expt. No.[NO] / mol L⁻¹[Br₂] / mol L⁻¹Initial rate / mol L⁻¹ s⁻¹
    10.050.051.0 × 10⁻³
    20.050.153.0 × 10⁻³
    30.150.059.0 × 10⁻³

    (a) What is the order with respect to NO and Br2\text{Br}_2 in the reaction?

    (b) Calculate the rate constant (kk).

    (c) Determine the rate of reaction when the concentrations of NO and Br2\text{Br}_2 are 0.4 M and 0.2 M respectively.

    HardAsked 2024
    4 marks
  35. 35

    Question 35

    (a) The decomposition of A into products has a value of kk as 4.5×103 s−14.5 \times 10^3\ \text{s}^{-1} at 10 ∘C10\,^\circ\text{C} and energy of activation 60 kJ mol−160\ \text{kJ mol}^{-1}. At what temperature would kk be 1.5×104 s−11.5 \times 10^4\ \text{s}^{-1}?

    (b)

    (i) If the half-life period of a first order reaction is xx and the 34\frac{3}{4}th life period of the same reaction is yy, how are xx and yy related to each other?

    (ii) In some cases it is found that a large number of colliding molecules have energy more than the threshold energy, yet the reaction is slow. Why?

    HardAsked 2023
    4 marks
  36. 36

    Question 36

    Read the passage and answer the questions that follow.

    The rate of a chemical reaction is expressed either in terms of decrease in the concentration of reactants or increase in the concentration of a product per unit time. Rate of the reaction depends upon the nature of reactants, concentration of reactants, temperature, presence of catalyst, surface area of the reactants and presence of light. Rate of reaction is directly related to the concentration of reactant. Rate law states that the rate of reaction depends upon the concentration terms on which the rate of reaction actually depends, as observed experimentally. The sum of powers of the concentration of the reactants in the rate law expression is called order of reaction, while the number of reacting species taking part in an elementary reaction which must collide simultaneously in order to bring about a chemical reaction is called molecularity of the reaction.

    (a) (i) What is a rate determining step? (ii) Define complex reaction. [1]

    (b) What is the effect of temperature on the rate constant of a reaction? [1]

    OR

    (b) Why is molecularity applicable only for elementary reactions whereas order is applicable for elementary as well as complex reactions? [1]

    (c) The conversion of molecule X to Y follows second order kinetics. If the concentration of X is increased 3 times, how will it affect the rate of formation of Y? [2]

    HardAsked 2025
    4 marks
  37. 37

    Question 37

    Read the passage and answer the questions that follow.

    The rate of reaction is concerned with decrease in concentration of reactants or increase in the concentration of products per unit time. It can be expressed as instantaneous rate at a particular instant of time and average rate over a large interval of time. Mathematical representation of rate of reaction is given by rate law. Rate constant and order of a reaction can be determined from rate law or its integrated rate equation.

    (i) What is average rate of reaction? [1]

    (ii) Write two factors that affect the rate of reaction. [1]

    (iii) (1) What happens to the rate of reaction for a zero order reaction? [1] (2) What is the unit of kk for a zero order reaction? [1]

    OR

    (iii) (1) For a reaction P+2Q→\text{P} + 2\text{Q} \rightarrow Products, Rate =k[P]1/2[Q]1= k[\text{P}]^{1/2}[\text{Q}]^1. What is the order of the reaction? [1] (2) Define pseudo first order reaction with an example. [1]

    HardAsked 2023
    4 marks