Confirming your payment

Skip to content

Previous Year Questions · Question 36 of 37

Read the passage and answer the questions that follow.

Question 365 marksAsked 2023Hard

Read the passage and answer the questions that follow.

Conductivity measurements are used routinely in many industrial and environmental applications as a fast, inexpensive and reliable way of measuring the ionic content in a solution. For example, the measurement of conductivity is a typical way to monitor and continuously trend the performance of water purification systems.

In many cases, conductivity is linked directly to the total dissolved solids (TDS). High-quality deionised water has a conductivity of about 5×10−6 S m−15 \times 10^{-6}\ \text{S m}^{-1} at STP, typical drinking water is in the range of 0.020.02–0.08 S m−10.08\ \text{S m}^{-1}, while sea water is about 5 S m−15\ \text{S m}^{-1}.

According to research, the TDS in a sample of fresh water can be calculated as

TDS (mg/L)=104×0.65×conductivity (S/m)\text{TDS (mg/L)} = 10^4 \times 0.65 \times \text{conductivity (S/m)}

The conductivity of a sample of water taken from a borewell is given as 0.13 S m−10.13\ \text{S m}^{-1} at STP. A conductivity cell is created using the water above. The resistance of the cell is found to be 10 ohm.

(a) What is the cell constant of the cell given above?

(b) What is the amount of TDS in the sample of water taken?

(c) According to some studies, TDS of 250 mg/L represents a good source of drinking water. What would the conductivity of such a sample of water be? If such water was made by diluting the sample of water given above, what would be the resistance of a conductivity cell made using it?