Opening your dashboard
Class 12 Biology Chapter 9 Biotechnology - Principles And Processes: Previous Year Questions
37 questions on Chapter 9, each solved step by step. Class 12 Biology, CBSE 2026-27.
37 questions with solutions
1–5 marks · Mixed difficulty
- 11 mark
Question 1
Name the enzymes P and Q involved in the processes shown below.
Solve with AIAnswer
(A) Enzyme P: exonuclease; enzyme Q: permease
(B) Enzyme P: exonuclease; enzyme Q: ligase
(C) Enzyme P: endonuclease; enzyme Q: permease
- Correct
(D) Enzyme P: restriction endonuclease; enzyme Q: DNA ligase
Option (D) is correct.
Explanation:
- P cuts both the foreign DNA and the vector at specific sites, so it is a restriction endonuclease. The same enzyme is used on both, so they get the same kind of sticky ends.
- Q joins the cut foreign DNA into the opened vector to form recombinant DNA, so it is DNA ligase.
Other options:
- (A) and (B) An exonuclease removes nucleotides from the ends of DNA; it does not cut at a specific internal site.
- (A) and (C) Permease transports substances across membranes; it does not join DNA.

- 21 mark
Question 2
A biotechnologist wanted to create a colony of E. coli carrying the plasmid pBR322 that is sensitive to tetracycline. Which one of the following restriction sites would he use to ligate a foreign DNA?
Solve with AIAnswer
- Correct
(A) Sal I
(B) Pvu I
(C) EcoR I
(D) Hind III
Option (A) is correct.
Explanation: In pBR322, the Sal I site (like BamH I) lies within the tetracycline-resistance gene (tetR). Inserting foreign DNA there inactivates tetR (insertional inactivation), so the recombinant cells become sensitive to tetracycline.
Other options:
- (B) Pvu I lies within ampR, so an insert there would cause sensitivity to ampicillin.
- (C) and (D) EcoR I and Hind III lie outside the tetR coding region in the map, so an insert there would not make the cells tetracycline-sensitive.

- 31 mark
Question 3
The restriction endonuclease Pst I recognises the sequence below and cuts each strand between A and G (5'-CTGCA↓G-3').
5'-C-T-G-C-A-G-3'
3'-G-A-C-G-T-C-5'
Choose the option that gives the correct fragments produced by Pst I.
Solve with AIAnswer
- Correct
(A) 5'-CTGCA-3' with 3'-G-5', and 5'-G-3' with 3'-ACGTC-5'
(B) 5'-CTG-3' with 3'-GAC-5', and 5'-CAG-3' with 3'-GTC-5'
(C) 5'-C-3' with 3'-GACGT-5', and 5'-TGCAG-3' with 3'-C-5'
(D) 5'-CTGC-3' with 3'-GA-5', and 5'-AG-3' with 3'-CGTC-5'
Option (A) is correct.
Concept used — staggered cutting by a restriction endonuclease
A restriction endonuclease recognises a palindromic sequence: the two strands read the same when each is read in the 5'→3' direction. It cuts each strand at the same position of that 5'→3' reading. The two strands run in opposite directions, so the two cuts fall at different places along the double helix (they are staggered), and each fragment is left with a single-stranded overhang, a sticky end.
Step 1 — Check that the site is a palindrome. The top strand, read 5'→3' (left to right), is CTGCAG. The bottom strand, read 5'→3' (right to left as printed), is also C-T-G-C-A-G. So both strands carry the same sequence, and Pst I cuts both of them between A and G.
Step 2 — Cut the top strand. 5'-CTGCA↓G-3' gives 5'-CTGCA-3' on the left and 5'-G-3' on the right.
Step 3 — Cut the bottom strand. Read 5'→3' (right to left), it is CTGCA↓G as well, so the cut lies between its A and its G. In the printed orientation that is 3'-G↓ACGTC-5', giving 3'-G-5' on the left and 3'-ACGTC-5' on the right.

The two cuts in the Pst I site are staggered: one near the right end of the top strand, one near the left end of the bottom strand.
Step 4 — Pair the pieces that lie side by side.
- Left fragment: 5'-CTGCA-3' paired with 3'-G-5'. Only the first C of the top strand has a partner, so TGCA hangs out single-stranded at the top strand's 3' end.
- Right fragment: 5'-G-3' paired with 3'-ACGTC-5'. The single-stranded overhang is ACGT read 3'→5', that is, 5'-TGCA-3'.
Both fragments therefore carry complementary TGCA overhangs: sticky ends.
Answer: option (A).
Why the other options are wrong
- (B) cuts both strands exactly at the centre (CTG↓CAG), which gives blunt ends. Pst I cuts between A and G, not between G and C.
- (C) cuts each strand between its first two bases, C↓TGCAG (top 5'-C-3' | 5'-TGCAG-3'), not between A and G.
- (D) cuts each strand between C and A, CTGC↓AG (top 5'-CTGC-3' | 5'-AG-3'), again one base away from the real cut point between A and G.
- 41 mark
Question 4
What does "I" in the restriction enzyme named Hin S2 I indicate?
Solve with AIAnswer
(A) It cuts after the first nucleotide in the restriction site.
- Correct
(B) It is the first enzyme isolated from strain S2 of the bacterium.
(C) There is definitely more than one enzyme isolated from the same bacterium.
(D) Only one enzyme can be used to digest a plasmid from strain S2 of the bacterium.
Option (B) is correct.
Explanation: NCERT: "Roman numbers following the names indicate the order in which the enzymes were isolated from that strain of bacteria." So "I" means the first enzyme isolated from strain S2.
Other options:
- (A) The numeral says nothing about where the enzyme cuts.
- (C) "I" does not show that a second enzyme exists.
- (D) is unrelated to the name.
- 51 mark
Question 5
A scientist wants to engineer E. coli to produce human growth hormone (HGH). He has all the necessary tools and a DNA probe for selecting transformants. Select the correct sequence of steps.
(a) Isolate plasmids from a culture of E. coli.
(b) Bacteria replicate the plasmids and multiply, producing clones of bacterial cells.
(c) Allow E. coli to take up the recombinant plasmids.
(d) Join the plasmids and the fragments of human DNA with ligase.
(e) Identify transformants carrying and expressing the HGH gene, using a nucleic acid probe.
(f) Cut the plasmids and the human DNA containing the HGH gene with the restriction enzyme, to produce molecules with sticky ends.
(g) Grow large amounts of the bacteria, and extract and purify HGH from the culture.
Solve with AIAnswer
- Correct
(A) (a), (f), (d), (c), (b), (e), (g)
(B) (a), (d), (f), (c), (b), (e), (g)
(C) (a), (f), (d), (c), (b), (g), (e)
(D) (a), (f), (d), (g), (c), (b), (e)
Option (A) is correct.
Explanation: Each step depends on the one before:
- (a) isolate the vector;
- (f) cut the vector and the human DNA with the same enzyme;
- (d) join them with ligase;
- (c) transform the competent E. coli;
- (b) the bacteria multiply into clones;
- (e) identify the clones that carry and express the gene;
- (g) scale up, and extract and purify the hormone (downstream processing).
Other options:
- (B) joins before cutting.
- (C) purifies before identifying the right clones.
- (D) grows the culture on a large scale before transformation.
- 61 mark
Question 6
While isolating DNA from bacteria, which of the following enzymes is not used?
Solve with AIAnswer
(A) Lysozyme
(B) Ribonuclease
- Correct
(C) Deoxyribonuclease
(D) Protease
Option (C) is correct.
Explanation: Deoxyribonuclease digests DNA, which is the very molecule being isolated, so it is never used.
Other options:
- (A) Lysozyme breaks the bacterial cell wall to release the DNA.
- (B) Ribonuclease removes RNA.
- (D) Protease removes proteins.
- 71 mark
Question 7
Which of the following bacteria is not a source of restriction endonuclease?
Solve with AIAnswer
(A) Haemophilus influenzae
(B) Escherichia coli
- Correct
(C) Agrobacterium tumefaciens
(D) Bacillus amyloliquefaciens
Option (C) is correct.
Explanation: Agrobacterium tumefaciens is known in biotechnology as the source of the Ti plasmid, which delivers T-DNA into plant cells. It is used as a vector, not as a source of restriction enzymes.
Other options:
- (A) Haemophilus influenzae is the source of Hind II and Hind III.
- (B) E. coli is the source of EcoR I.
- (D) Bacillus amyloliquefaciens is the source of BamH I.
- 81 mark
Question 8
The process of separation and purification of an expressed protein before marketing is called:
Solve with AIAnswer
(A) upstream processing
- Correct
(B) downstream processing
(C) bioprocessing
(D) post-production processing
Option (B) is correct.
Explanation: NCERT: after the biosynthetic stage, the product undergoes a series of processes, including separation and purification, "which are collectively referred to as downstream processing". It also includes formulation with preservatives, clinical trials (for drugs) and quality-control testing.
Why the other options are wrong
- (A) Upstream steps come before the biosynthetic stage; separation and purification come after it.
- (C) Bioprocessing is the general term for making the product; NCERT calls separation and purification downstream processing.
- (D) "Post-production processing" is not the term NCERT uses for these steps.
- 91 mark
Question 9
Only Type II restriction enzymes are used in gene manipulation because:
Solve with AIAnswer
(A) ATP is not required for cleaving.
(B) they consist of three different subunits.
(C) they make a cut in both strands of the DNA molecule.
- Correct
(D) Both (A) and (C)
Option (D) is correct.
Explanation: Type II restriction enzymes are simple: they do not need ATP, and they cut both strands of DNA at a defined position within or next to their recognition sequence. This precise, predictable cutting is what gene cloning needs.
Why the other options are wrong
- (A) True, but it is only one of the two reasons; (D) includes it together with (C).
- (B) Having three subunits describes the more complex types, which cut at variable places.
- (C) True, but it is only one of the two reasons; (D) includes it together with (A).
(Classifying restriction enzymes into types goes beyond the NCERT text.)
- 101 mark
Question 10
Which of the following ions is used by restriction endonucleases for restriction?
Solve with AIAnswer
- Correct
(A) Mg²⁺
(B) Mn²⁺
(C) Na⁺
(D) K⁺
Option (A) is correct.
Explanation: Restriction endonucleases need magnesium ions (Mg²⁺) as a cofactor to cut the sugar-phosphate backbone of DNA. This is one of the "optimal conditions for that specific enzyme" under which restriction digestions are performed.
(The specific ion goes beyond the NCERT text.)
Why the other options are wrong
- (B) Mn²⁺ is not the ion restriction endonucleases use for cutting; Mg²⁺ is.
- (C) Na⁺ is a monovalent ion and is not the cofactor for restriction.
- (D) K⁺ is a monovalent ion and is not the cofactor for restriction.
- 111 mark
Question 11
Restriction endonuclease was isolated for the first time from a:
Solve with AIAnswer
(A) plant cell
(B) animal cell
- Correct
(C) prokaryotic cell
(D) germ cell
Option (C) is correct.
Explanation: Restriction enzymes come from bacteria. The first enzymes restricting phage growth were isolated from Escherichia coli, and the first sequence-specific one, Hind II, from Haemophilus influenzae. NCERT's naming convention also refers to "the prokaryotic cell from which they were isolated".
Why the other options are wrong
- (A) Plant cells are eukaryotic; restriction enzymes are named after the prokaryotic cell from which they were isolated.
- (B) Animal cells are eukaryotic; the first restriction endonucleases came from bacteria.
- (D) Germ cells are reproductive cells of eukaryotes, not the bacteria these enzymes come from.
- 121 mark
Question 12
Restriction endonucleases are also called molecular or biological scissors because:
Solve with AIAnswer
(A) they cleave base pairs of DNA only at their terminal ends
- Correct
(B) they cut the strands of DNA at specific positions
(C) they act only on single-stranded DNA
(D) none of these
Option (B) is correct.
Explanation: Like scissors, restriction endonucleases cut DNA at specific places. Each one recognises a specific palindromic sequence and cuts each of the two strands at specific points in the sugar-phosphate backbone. NCERT calls them "molecular scissors".
Why the other options are wrong
- (A) describes exonucleases, which work at the ends.
- (C) They act on double-stranded DNA.
- (D) Option (B) is correct, so "none of these" is wrong.
- 131 mark
Question 13
Which type of restriction endonuclease is used most in genetic engineering?
Solve with AIAnswer
(A) Type I
- Correct
(B) Type II
(C) Type III
(D) Type IV
Option (B) is correct.
Explanation: Type II enzymes cut DNA at a precise, predictable position at or near their recognition sequence, and they need no ATP. This is exactly what is needed to produce defined fragments and sticky ends for cloning. The other types cut at variable positions.
(Classifying restriction enzymes into types goes beyond the NCERT text.)
Why the other options are wrong
- (A) Type I enzymes need ATP and cut at variable positions far from their recognition site, so they cannot give defined fragments.
- (C) Type III enzymes need ATP and cut outside their recognition site, so they are not the routine choice for cloning.
- (D) Type IV enzymes cut only modified (methylated) DNA, so they are not used to cut DNA for cloning.
- 141 mark
Question 14
The transfer of genetic material from one bacterium to another through the mediation of a vector like a virus is termed:
Solve with AIAnswer
- Correct
(A) transduction
(B) conjugation
(C) transformation
(D) translation
Option (A) is correct.
Explanation: In transduction, a bacteriophage (a virus of bacteria) carries a piece of DNA from one bacterium to another.
Other options:
- (B) Conjugation is transfer by direct cell-to-cell contact.
- (C) Transformation is the uptake of free DNA from the surroundings; this is how competent cells take up recombinant DNA.
- (D) Translation is protein synthesis.
(Transduction and conjugation are not part of the current NCERT text of this chapter.)
- 151 mark
Question 15
Which enzyme is used to join DNA fragments during genetic engineering?
Solve with AIAnswer
(A) Restriction endonuclease
- Correct
(B) DNA ligase
(C) Reverse transcriptase
(D) DNA polymerase
Option (B) is correct.
Explanation: DNA ligase "acts on cut DNA molecules and joins their ends", forming recombinant DNA.
Other options:
- (A) Restriction endonuclease cuts DNA.
- (C) Reverse transcriptase makes DNA from RNA.
- (D) DNA polymerase copies DNA.
- 163 marks
Question 16
You have created a recombinant DNA molecule by ligating a gene into a plasmid vector. By mistake, your friend adds an exonuclease enzyme to the tube containing the recombinant DNA.
(a) How will your experiment be affected, as you now go on to transformation?
(b) What is EcoR I?
(c) How does EcoR I differ from an exonuclease?
Solve with AIWritten solution
(a) The experiment is not likely to be affected. The recombinant DNA is a closed circle with no free ends. An exonuclease removes nucleotides only from the ends of DNA, so it cannot act on it.
(b) EcoR I is a restriction endonuclease from Escherichia coli RY 13.
(c) An exonuclease removes nucleotides from the ends of the DNA. EcoR I, an endonuclease, makes cuts at a specific position within the DNA, at its palindromic recognition site GAATTC.
- 173 marks
Question 17
Explain the three steps carried out in the formation of recombinant DNA using the enzyme EcoR I.
Solve with AIWritten solution
- Cutting: EcoR I recognises the palindromic sequence 5'-GAATTC-3' in both the vector DNA and the foreign DNA. It cuts each strand between G and A, a little away from the centre of the site.
- Sticky ends: the staggered cuts leave single-stranded overhangs (sticky ends) on the fragments. Because the same enzyme cut both molecules, their sticky ends are complementary and form hydrogen bonds.
- Joining: DNA ligase joins the vector and the foreign DNA at their sticky ends, forming recombinant DNA.

- 183 marks
Question 18
A cloning vector is a small DNA molecule capable of self-replication inside the host cell. It is used for replicating a donor DNA fragment within the host cell.
(a) Name any two natural cloning vectors.
(b) Give reasons that make them act as cloning vectors.
(c) Write two characteristics that engineered vectors are made to possess.
Solve with AIWritten solution
(a) Plasmids and bacteriophages.
(b) They can replicate within bacterial cells independently of the chromosomal DNA. They also have copy numbers that can be high, especially bacteriophages, so a linked foreign DNA is multiplied to the same number.
(c) Engineered vectors are made to allow easy linking of foreign DNA, for example through a single cloning site, and selection of recombinants from non-recombinants, through selectable markers.
- 193 marks
Question 19
Name any two natural cloning vectors. Give reasons that make them act as cloning vectors. Write the two characteristics that engineered vectors are made to possess.
Solve with AIWritten solution
Natural vectors: plasmids (autonomously replicating, circular, extra-chromosomal DNA of bacteria) and bacteriophages (viruses that infect bacteria).
Reasons:
- They replicate within bacterial cells independently of the chromosomal DNA.
- They have a copy number: bacteriophages have very high copy numbers, and plasmids range from 1–2 to 15–100 copies per cell. A foreign DNA linked to them is multiplied to the same number.
Engineered vectors are made to help easy linking of foreign DNA and selection of recombinants from non-recombinants.
- 203 marks
Question 20
The image shows the result of gel electrophoresis. The ladder (L) contains DNA fragments of known size, up to 3000 base pairs.

(a) Which of the bands I–IV correspond to 2500 bp and 100 bp, respectively?
(b) Explain the basis of this kind of separation, and mention the significance of the process.
Solve with AIWritten solution
(a) Band III is 2500 bp: it stays near the top, level with the ladder's 2500 bp band. Band IV is 100 bp: it moved the farthest, level with the smallest ladder band.
(b) DNA fragments are negatively charged, so under an electric field they move towards the anode through the agarose gel. The gel acts as a sieve, so the fragments separate by size: the smaller the fragment, the farther it moves.
Significance: it separates and identifies DNA fragments. Desired fragments can be cut out of the gel (elution) and used to construct recombinant DNA. It is also used to check the progress of a restriction digestion.
- 213 marks
Question 21
The diagram shows DNA fragments separated by gel electrophoresis.

(a) Why are the DNA fragments seen moving in the direction A → B?
(b) Name the medium in which the DNA fragments separate.
(c) How can the separated DNA fragments be seen for further use?
Solve with AIWritten solution
(a) B is the anode (positive electrode). DNA fragments are negatively charged, so they move towards the anode under the electric field.
(b) Agarose, a natural polymer extracted from seaweeds.
(c) The DNA is stained with ethidium bromide and exposed to UV light. The DNA then shows as bright orange bands. (Pure DNA cannot be seen in visible light without staining.)
- 223 marks
Question 22
A host cell must be made competent before it can receive rDNA. Justify. How does the calcium ion help in doing so?
Solve with AIWritten solution
Why competence is needed: DNA is a hydrophilic molecule, so it cannot pass through cell membranes. The bacterial cells must first be made "competent" to take up DNA.
Role of calcium: the cells are treated with a specific concentration of a divalent cation, such as calcium, which "increases the efficiency with which DNA enters the bacterium through pores in its cell wall". The cells are then incubated with the recombinant DNA on ice, given a brief heat shock at 42 °C, and put back on ice. This enables them to take up the recombinant DNA.
- 233 marks
Question 23
Selectable markers are genes present in cloning vectors. A selectable marker can be used to select recombinants on the basis of their ability to produce colour in the presence of a chromogenic substrate.
(a) Name the mechanism involved.
(b) Which enzyme is involved in producing the colour?
(c) How is this method advantageous over using an antibiotic-resistance gene as the selectable marker?
Solve with AIWritten solution
(a) Insertional inactivation. The recombinant DNA is inserted within the coding sequence of an enzyme, which inactivates its gene.
(b) β-galactosidase. Without an insert, the enzyme is made and gives blue colonies with the chromogenic substrate. With an insert, the gene is inactivated and the colonies are colourless (recombinants).
(c) Selecting recombinants through inactivation of an antibiotic-resistance gene "is a cumbersome procedure because it requires simultaneous plating on two plates having different antibiotics". The colour method identifies recombinants on a single plate.

- 243 marks
Question 24
Explain the role(s) of the following in biotechnology:
(i) restriction endonuclease
(ii) gel electrophoresis
(iii) selectable markers in pBR322
Solve with AIWritten solution
(i) A restriction endonuclease recognises a specific palindromic sequence in DNA and cuts both strands at specific points, usually leaving sticky ends. This allows the gene of interest and the vector to be cut and joined, forming recombinant DNA.
(ii) Gel electrophoresis separates DNA fragments by size: negatively charged DNA moves towards the anode through an agarose gel, and smaller fragments move farther. The desired fragment can then be cut out (eluted), and the progress of a digestion can be checked.
(iii) pBR322 carries two selectable markers, ampR and tetR. One helps to select the transformants, since normal E. coli are not resistant. The other is inactivated by an insert (insertional inactivation), which helps to select the recombinants.

- 253 marks
Question 25
Write the steps you would suggest to obtain a foreign-gene product.
Solve with AIWritten solution
- Insert the desired gene into a cloning vector, cutting both with the same restriction enzyme and joining them with ligase, to form recombinant DNA.
- Transfer the recombinant DNA into a suitable host (bacterial, plant or animal cell), where the alien DNA multiplies.
- Select the transformants and recombinants using selectable markers.
- Provide optimised conditions to induce expression of the target protein.
- Grow the cells on a large scale in a bioreactor, for example in a continuous culture that keeps them in the log phase.
- Downstream processing: separate and purify the product, formulate it with preservatives, and carry out clinical trials (for drugs) and quality control.
- 263 marks
Question 26
All cloning vectors have a "selectable marker". Describe its role in recombinant DNA technology.
Solve with AIWritten solution
A selectable marker is a gene in the vector that "helps in identifying and eliminating non-transformants and selectively permitting the growth of the transformants". Usually, it is a gene for resistance to an antibiotic, such as ampicillin, chloramphenicol, tetracycline or kanamycin.
Normal E. coli cells are not resistant to these antibiotics. When cells are spread on a medium containing the antibiotic, only those that took up the vector survive. For example, "If we spread the transformed cells on agar plates containing ampicillin, only transformants will grow, untransformed recipient cells will die."
- 272 marks
Question 27
Why is the "insertional inactivation" method of detecting recombinant DNA preferred to the "antibiotic resistance" procedure?
Solve with AIWritten solution
- In the antibiotic-resistance procedure, recombinants are identified because an insert inactivates one resistance gene. This "is a cumbersome procedure because it requires simultaneous plating on two plates having different antibiotics".
- In insertional inactivation of β-galactosidase, the insert inactivates the enzyme's gene. On a plate with a chromogenic substrate, colonies without an insert are blue, and recombinant colonies are colourless. They are told apart on a single plate, just by colour.

- 282 marks
Question 28
Differentiate between a genomic library and a cDNA library. Why is a cDNA library preferred for expressing a eukaryotic gene in a bacterial host?
Solve with AIWritten solution
Genomic library cDNA library A collection of clones with DNA fragments representing the entire genome, including coding (exons) and non-coding (introns, regulatory) sequences Made from mRNA, using the enzyme reverse transcriptase; contains only the expressed, intron-free coding sequences Why cDNA: bacteria cannot remove introns (they lack the splicing machinery). A eukaryotic gene with introns would not give the correct protein in a bacterium. cDNA is already intron-free, so the bacterium can express it directly.
(Gene libraries and reverse transcriptase go beyond the NCERT text of this chapter.)
- 292 marks
Question 29
How can bacterial DNA be released from the bacterial cell for biotechnology experiments?
Solve with AIWritten solution
The DNA is enclosed within membranes, so the cell must be broken open. Bacterial cells are treated with the enzyme lysozyme, which breaks down the bacterial cell wall and releases the DNA, along with RNA, proteins, polysaccharides and lipids.
The RNA is then removed with ribonuclease and the proteins with protease. Purified DNA precipitates on adding chilled ethanol.
- 303 marks
Question 30
In a pathological lab, a series of steps were undertaken to amplify a gene of interest. Describe the steps, or make a flow chart, showing the process of amplification of this gene.
Solve with AIWritten solution
The technique is the polymerase chain reaction (PCR). Each cycle has three steps:
- Denaturation: the double-stranded DNA is heated (to about 94 °C) so that its strands separate.
- Primer annealing: two sets of primers, small synthetic oligonucleotides complementary to the regions flanking the gene, bind to the single strands.
- Extension: a thermostable DNA polymerase (from Thermus aquaticus) extends the primers using deoxynucleotides.
The cycle is repeated many times, and the gene is amplified about a billion times.

- 315 marks
Question 31
(a) Explain the different steps carried out in the polymerase chain reaction, and the specific roles of the enzymes used.
(b) Mention an application of PCR in the field of:
(i) biotechnology
(ii) diagnostics
Solve with AIWritten solution
(a) PCR makes multiple copies of a gene or DNA of interest in vitro, using two sets of primers and a DNA polymerase. Each cycle has three steps:
- Denaturation: the double-stranded DNA is heated (about 94 °C), so the strands separate. Each strand acts as a template.
- Primer annealing: the two primers, complementary to the regions flanking the target, bind to the templates.
- Extension: a thermostable DNA polymerase (Taq polymerase, from Thermus aquaticus) extends the primers using deoxynucleotides. It stays active through the repeated high-temperature denaturation.
Repeating the cycle amplifies the segment about a billion times.
(b)
- (i) Biotechnology: amplifying the gene of interest for ligation into a vector, for cloning.
- (ii) Diagnostics: detecting a pathogen's genes, or a mutated gene, even when present in very low amounts, allowing early diagnosis.

- 325 marks
Question 32
A schematic of the polymerase chain reaction (PCR) is shown below.

(a) Name the process A.
(b) Identify B.
(c) How many DNA duplexes are obtained from one DNA duplex after 3 cycles of PCR?
Solve with AIWritten solution
(a) A: denaturation. The double-stranded DNA is heated to a high temperature, so its two strands separate.
(b) B: primers, small synthetic oligonucleotides that bind (anneal) to the complementary regions flanking the target. The thermostable DNA polymerase then extends them.
(c) The number of duplexes doubles each cycle: 1 → 2 → 4 → 8. After 3 cycles there are 2³ = 8 DNA duplexes.

- 335 marks
Question 33
pUC18 is similar to pBR322 in function, but they differ in some of their restriction sites and in their copy number. The copy number of pBR322 is about 20. Study the segment of DNA below and answer.
5'…ATC GTA AAG CTT CAT…3'
3'…TAG CAT TTC GAA GTA…5'
(i) Using your knowledge of palindromes, identify and mark the region where a restriction enzyme X would act.
(ii) Restriction enzyme Y was used to extract a gene of interest from a plant. This gene is to be inserted into the DNA segment above, which has been treated with enzyme X. Will the recombination succeed? Give a reason.
(iii) pUC18 has a higher copy number than pBR322. Which of the two would you prefer for biotechnological studies? Justify.
Solve with AIWritten solution
(i) The palindrome is:
5'…ATC GTA AAG CTT CAT…3'
3'…TAG CAT TTC GAA GTA…5'
AAGCTT reads the same on both strands in the 5'→3' direction. (It is the recognition site of Hind III.)
(ii) No. The gene and the vector must be cut with the same restriction enzyme to have the same, complementary sticky ends. Fragments cut with X and Y have different ends, which cannot pair to be joined by ligase.
(iii) pUC18, because it has a higher copy number. A gene cloned in it is multiplied to more copies per cell. The ori controls the copy number, and to recover many copies, a vector whose origin supports a high copy number is chosen.
- 345 marks
Question 34
Some restriction enzymes break a phosphodiester bond on both DNA strands so that the cut ends have regions of single-stranded DNA. BamH I is one such enzyme: it binds at the recognition sequence 5'-GGATCC-3' and cleaves just after the 5' guanine on each strand.
(a) What is the objective of this action?
(b) Explain how the gene of interest is introduced into a vector.
(c) This DNA is cut with BamH I:
5'-ATTTTGAGGATCCGTAATGTCCT-3'
3'-TAAAACTCCTAGGCATTACAGGA-5'
How many fragments would you expect? Write the sequence of the double-stranded fragments, with polarity.
(d) A gene M is introduced into the E. coli cloning vector pBR322 at the BamH I site. What will be its effect on the recombinant plasmids? Give a way to tell recombinant from non-recombinant plasmids.
Solve with AIWritten solution
(a) To produce sticky ends, so that DNA molecules cut by the same enzyme have complementary ends that can pair and be joined.
(b) The vector and the source DNA are cut with the same restriction enzyme. The gene of interest is mixed with the cut vector, and DNA ligase joins their sticky ends, giving recombinant DNA.
(c) Two fragments, since there is one GGATCC site:
- Fragment 1: 5'-ATTTTGAG-3' paired with 3'-TAAAACTCCTAG-5'
- Fragment 2: 5'-GATCCGTAATGTCCT-3' paired with 3'-GCATTACAGGA-5'
Each has a GATC single-stranded overhang.
(d) The BamH I site lies within the tetracycline-resistance gene. Inserting gene M inactivates it, so the recombinants lose tetracycline resistance but keep ampicillin resistance.
To tell them apart, plate the transformants on ampicillin, then transfer them to tetracycline. Recombinants grow on ampicillin but not on tetracycline. Non-recombinants grow on both.

- 355 marks
Question 35
Unless the vector and the source DNA are cut, the fragments separated and joined, the desired recombinant vector cannot be created.
(i) How is the desired DNA sequence cut?
(ii) Explain the technique used to separate the cut fragments.
(iii) How are the resulting fragments joined to the vector DNA?
Solve with AIWritten solution
(i) The vector and the source DNA are cut with the same restriction endonuclease, such as EcoR I. It recognises a specific palindromic sequence and cuts each strand, leaving sticky ends.
(ii) Agarose gel electrophoresis. The DNA is loaded into wells at the cathode end. Being negatively charged, the fragments move towards the anode through the agarose gel, which sieves them by size: smaller fragments move farther. The bands are seen after ethidium bromide staining under UV light. The desired band is cut out and eluted.
(iii) The eluted fragment is mixed with the cut vector. Their complementary sticky ends pair up, and DNA ligase joins them, forming recombinant DNA.
- 363 marks
Question 36
Cloning of genes plays a very significant role in genetic engineering, helping the transfer of desirable foreign genes into different hosts. Scientists have created engineered vectors that allow easy linking of foreign DNA and selection of recombinants from non-recombinants. pBR322 is one such engineered vector.

(a) Explain what is meant when a cell is said to be competent.
(b) Which method can be used to make E. coli cells competent to take up pBR322?
(c) Describe the process used to make the cells competent and to take up the DNA.
Solve with AIWritten solution
(a) A competent cell is able to take up DNA from its surroundings. DNA is hydrophilic and cannot normally pass through cell membranes, so cells must first be made competent.
(b) Treatment with a divalent cation such as calcium (calcium chloride), followed by heat shock.
(c) The cells are treated with a specific concentration of calcium, which increases the efficiency with which DNA enters through pores in the cell wall. They are then incubated with the recombinant DNA on ice, placed briefly at 42 °C (heat shock), and put back on ice. This enables the bacteria to take up the recombinant DNA.
- 373 marks
Question 37
A research team is producing recombinant human growth hormone in E. coli. Human genes contain introns, so the scientists obtain the mRNA and convert it into cDNA using reverse transcriptase. The plasmid vector and the cDNA are both cut with the same restriction endonuclease and joined with DNA ligase. The recombinant plasmid is introduced into competent E. coli by heat shock. Transformed cells are selected on an ampicillin medium, because the vector carries an ampicillin-resistance gene. The expressed protein is finally purified.
(a) Why was cDNA used instead of the original human DNA?
(b) What is the significance of using the same restriction enzyme on both the vector and the cDNA?
(c) State the role of the antibiotic-resistance gene in selecting the transformed cells.
(d) Name, and briefly explain, the step of separating and purifying the expressed protein.
Solve with AIWritten solution
(a) cDNA is made from mRNA, so it is free of introns. Bacteria cannot remove introns, so they could not express the original human gene correctly; they can express cDNA directly.
(b) The same enzyme produces the same, complementary sticky ends on both molecules, so they pair up and can be joined by ligase to form recombinant DNA.
(c) It is the selectable marker. Only bacteria that took up the plasmid, carrying ampR, can survive on ampicillin; untransformed cells die.
(d) Downstream processing: the separation and purification of the product, its formulation with suitable preservatives, clinical trials (for drugs) and strict quality-control testing before marketing.
