Opening your dashboard
Class 10 Physics Chapter 9 Light Reflection and Refraction: Previous Year Questions
36 questions on Chapter 9, each solved step by step. Class 10 Physics, CBSE 2026-27.
36 questions with solutions
1–5 marks · Mixed difficulty
- 11 mark
Question 1
Beams of light are incident through the holes A and B and emerge out of the box through the holes C and D respectively, as shown in the figure.
Which of the following could be inside the box?
Solve with AIAnswer
- Correct
(A) A rectangular glass slab
(B) A convex lens
(C) A concave lens
(D) A prism
Option (A) is correct.
Explanation: Each beam leaves the box travelling in exactly its original direction, but along a line shifted sideways. Only a rectangular glass slab does that: its two faces are parallel, so the bending towards the normal on entry is undone by an equal bending away from the normal on exit, and the ray is displaced without being turned.
(B) A convex lens would bend the two beams towards each other, so they would not leave parallel to their original paths.
(C) A concave lens would bend the two beams apart.
(D) A prism deviates a ray towards its base, so the emerging beams would travel in a new direction.

- 21 mark
Question 2
Both a spherical mirror and a thin spherical lens have a focal length of (–)15 cm.
What type of mirror and lens are these?Solve with AIAnswer
- Correct
(A) Both are concave.
(B) Both are convex.
(C) The mirror is concave and the lens is convex.
(D) The mirror is convex and the lens is concave.
Option (A) is correct.
Explanation: Under the New Cartesian Sign Convention, distances measured against the direction of the incident light are negative.
- A concave mirror has its focus in front of the mirror, on the same side as the object, so its focal length is negative.
- A concave lens has a virtual focus on the same side as the incoming light, so its focal length is also negative.
So for both means both are concave.
(B) A convex mirror and a convex lens both have positive focal lengths.
(C) A convex lens has a positive focal length, so it cannot have .
(D) A convex mirror has a positive focal length, so it cannot have .

- 31 mark
Question 3
Refractive index of diamond with respect to glass is 1.6. If the absolute refractive index of glass is 1.5, the absolute refractive index of diamond is:
Solve with AIAnswer
(A) 1.09
(B) 1.96
- Correct
(C) 2.4
(D) 2.5
Option (C) is correct.
Explanation: The refractive index of diamond with respect to glass is the ratio of their absolute refractive indices:
Why not the others: none of , or follows from the relation . The commonest slip, dividing instead of multiplying, gives . That is smaller than glass's , so it would make diamond optically rarer than glass — contradicting , which says diamond is the denser of the two.
- 41 mark
Question 4
The refractive index of medium A is 1.5 and that of medium B is 1.33. If the speed of light in air is , what is the speed of light in medium A and B respectively?
Solve with AIAnswer
(A) and
(B) and
(C) and
- Correct
(D) and
Option (D) is correct.
Explanation: The speed of light in a medium is .
Medium A has the larger refractive index, so light is slower in A than in B.
(A) is not ; it confuses the refractive index with the speed.
(B) Reverses the order and repeats the same confusion.
(C) Gives the two speeds in the wrong order: the slower speed belongs to A, the medium with the larger refractive index.
- 51 mark
Question 5
Which of the following statements is NOT true in reference to the diagram shown?
Solve with AIAnswer
(A) Image formed is real.
- Correct
(B) Image formed is enlarged.
(C) Image is formed at a distance equal to double the focal length
(D) Image formed is inverted.
Option (B) is correct.
Explanation: The candle stands at the centre of curvature C of a concave mirror. For this position the image is formed at C itself, and it is real, inverted and the same size as the object. So the statement that the image is enlarged is the one that is NOT true.
(A) True: the image is real and can be caught on a screen.
(C) True: the image is formed at C, which is at a distance from the mirror.
(D) True: a real image formed by a concave mirror is inverted.

- 61 mark
Question 6
The correct sequencing of the angle of incidence, angle of emergence, angle of refraction, and lateral displacement shown in the following diagram by digits 1, 2, 3, and 4 is:
Solve with AIAnswer
(A) 2, 4, 1, 3
- Correct
(B) 2, 1, 4, 3
(C) 1, 2, 4, 3
(D) 2, 1, 3, 4
Option (B) is correct.
Explanation: Every angle is measured from the normal.
- 2 is the angle of incidence: between the incident ray and the normal at the first face.
- 1 is the angle of emergence: between the emergent ray and the normal at the second face.
- 4 is the angle of refraction: between the refracted ray inside the slab and the normal.
- 3 is the lateral displacement: the sideways shift between the incident ray produced and the emergent ray.
So the order asked for (incidence, emergence, refraction, lateral displacement) is 2, 1, 4, 3.
(A) Swaps emergence and refraction.
(C) Takes angle 1 as the angle of incidence.
(D) Swaps the angle of refraction with the lateral displacement.
- 71 mark
Question 7
A converging lens forms a three times magnified image of an object, which can be taken on a screen. If the focal length of the lens is 30 cm, then the distance of the object from the lens is:
Solve with AIAnswer
(A) –55 cm
(B) –50 cm
(C) –45 cm
- Correct
(D) –40 cm
Option (D) is correct.
Explanation: The image is caught on a screen, so it is real and inverted, and . For a lens , so .
The object is in front of the lens, between () and (), which is where a convex lens gives a real, magnified image.
(A), (B) and (C) do not satisfy the lens formula with : for example gives and .

- 81 mark
Question 8
A mirror magnifies the image of an object by minus 1.5 times. Which of the following is true about the image produced by the mirror?
Solve with AIAnswer
- Correct
(A) The image is real and larger than the object
(B) The image is real and smaller than the object.
(C) The image is virtual and larger than the object.
(D) The image is virtual and smaller than the object.
Option (A) is correct.
Explanation: A magnification of carries two pieces of information.
- The negative sign means the image is inverted. A mirror forms an inverted image only when the image is real, so the image is real.
- The size means the image is larger than the object.
(B) A real image, but means it is larger, not smaller.
(C) and (D) A virtual image formed by a mirror is always erect, which would make positive.

- 91 mark
Question 9
In your laboratory, you trace the path of light rays through a glass slab for different values of angle of incidence () and in each case, measure the values of the corresponding angle of refraction () and angle of emergence ().
On the basis of your observation, your correct conclusion is:
Solve with AIAnswer
- Correct
(A) is more than but nearly equal to .
(B) is less than but nearly equal to .
(C) is more than but nearly equal to .
(D) is less than but nearly equal to .
Option (A) is correct.
Explanation: At the first face the ray passes from air into glass, a denser medium, so it bends towards the normal and is smaller than . The two faces of the slab are parallel, so at the second face the ray bends away from the normal by the same amount and leaves parallel to its original direction. That makes equal to (nearly equal in a real experiment, because of small errors in tracing).
(B) In going from air into glass, is more than , not less.
(C) is nearly equal to , not to .
(D) Gets both comparisons wrong.

- 101 mark
Question 10
The focal length of a concave mirror is:
Solve with AIAnswer
- Correct
(A) negative
(B) positive
(C) depends on the position of the object
(D) depends on the position of the image
Option (A) is correct.
Explanation: Under the New Cartesian Sign Convention, distances are measured from the pole, and those measured against the direction of the incident light are negative. The principal focus of a concave mirror lies in front of the mirror, on the same side as the object, so its focal length is always negative.
(B) A positive focal length belongs to a convex mirror, whose focus lies behind it.
(C) and (D) The focal length is fixed by the mirror's curvature (). Moving the object or the image does not change it.

- 111 mark
Question 11
For a convex mirror, the image distance () = 5 cm, focal length () = 10 cm, and height of the image () = 7.5 cm. The correct representation according to sign conventions is ?
Solve with AIAnswer
(A)
(B)
(C)
- Correct
(D)
Option (D) is correct.
Explanation: For a convex mirror:
- the focus lies behind the mirror, so ;
- the image is always virtual and formed behind the mirror, so ;
- the image is always erect, so it stands above the principal axis and .
(A) Gives all three negative signs, which would describe a real, inverted image in front of a concave mirror.
(B) Puts a virtual image in front of the mirror and makes an erect image negative.
(C) Gives the convex mirror a negative focal length.

- 121 mark
Question 12
The light enters from air to glass having refractive index 1.5. The speed of light in glass is:
Solve with AIAnswer
(A)
- Correct
(B)
(C)
(D)
Option (B) is correct.
Explanation: The refractive index is the ratio of the speed of light in air to its speed in the medium:
(A) is the speed in air; light slows down in glass.
(C) comes from dividing by 2 instead of by 1.5.
(D) is the speed in water (), not glass.
- 131 mark
Question 13
To obtain a magnification of +2 with a concave mirror of radius of curvature 60 cm, the object distance must be:
Solve with AIAnswer
(A) –90 cm
(B) –45 cm
(C) –30 cm
- Correct
(D) –15 cm
Option (D) is correct.
Explanation: For a concave mirror the focus lies in front of the mirror, so and .
A magnification of means the image is erect and twice the size, so it is virtual. Using :
Substituting in the mirror formula:
The object is from the mirror, between the pole and the focus, which is the only place a concave mirror forms a virtual, magnified image.
(A), (B) and (C) all put the object at or beyond the focus (), where the image is real and inverted, so the magnification would be negative.

- 141 mark
Question 14
A student wants to obtain an erect image of an object using a concave mirror of 10 cm focal length. What will be the distance of the object from the mirror?
Solve with AIAnswer
- Correct
(A) Less than 10 cm
(B) 10 cm
(C) Between 10 cm and 20 cm
(D) More than 20 cm
Option (A) is correct.
Explanation: A concave mirror forms an erect image only when the object is between the pole P and the focus F. Here , so the object must be less than from the mirror. The image is then virtual, erect and magnified.
(B) At the object is at F, and the image is formed at infinity.
(C) Between F and C ( to ) the image is real, inverted and magnified.
(D) Beyond C the image is real, inverted and diminished.

- 151 mark
Question 15
The radius of curvature of a converging mirror is 30 cm. At what distance from the mirror should an object be placed to obtain a virtual image?
Solve with AIAnswer
(A) Infinity
(B) 30 cm
(C) Between 15 cm and 30 cm
- Correct
(D) Between 0 cm and 15 cm
Option (D) is correct.
Explanation: A converging mirror is a concave mirror, and its focal length is half its radius of curvature:
A concave mirror forms a virtual image only when the object is between the pole and the focus, so the object must be between and from the mirror.
(A) An object at infinity gives a real, point-sized image at F.
(B) At the object is at C, giving a real, inverted image of the same size.
(C) Between and the object is between F and C, giving a real, inverted, magnified image.

- 163 marks
Question 16
The refractive indices of three media are given below:
Medium Refractive index A 1.6 B 1.8 C 1.5 A ray of light travels:
- (i) from A to B, and
- (ii) from B to C.
(a) In which of the two cases does the refracted ray bend towards the normal?
(b) In which case does the speed of light increase in the second medium?
Give reasons for your answer.Solve with AIWritten solution
(a) When light travels from a rarer medium to a denser medium, it bends towards the normal.
Since :
The ray will bend towards the normal when passing from A to B.(b) The speed of light increases when it travels from a denser medium to a rarer medium.
Since :
The speed of light will increase when the ray travels from B to C.Explanation:
- As refractive index (n) increases, the speed (v) decreases.
- As refractive index (n) decreases, the speed (v) increases.

- 172 marks
Question 17
A student traces the path of a ray of light through a glass prism as shown in the diagram but leaves it incomplete and unlabelled.
Redraw and complete the diagram.
Also label on it ∠i, ∠e, ∠r, and ∠D.
Solve with AIWritten solution
In the completed diagram:
- The ray bends towards the normal as it enters the prism (air to glass) and away from the normal as it leaves (glass to air).
- ∠i is the angle between the incident ray and the normal at the first face.
- ∠r is the angle between the refracted ray inside the prism and that normal.
- ∠e is the angle between the emergent ray and the normal at the second face.
- ∠D, the angle of deviation, is the angle between the incident ray produced forward and the emergent ray produced backward.
Both bends turn the ray towards the base of the prism, so it emerges deviated from its original direction.

- 182 marks
Question 18
The power of a lens is +5 dioptre. What is the nature and focal length of this lens?
At what distance from this lens should an object be placed so as to get its inverted image of the same size?Solve with AIWritten solution
Given,
- Since power is positive, the lens is a convex (converging) lens.
To obtain an inverted image of the same size, the object must be placed at 2F₁, a distance of 2f from the lens (for a lens, 2F is simply twice the focal length — not a centre of curvature).
- Nature of lens: Convex lens
- Focal length: 20 cm
- Object distance for same-size inverted image: 40 cm

- 193 marks
Question 19
The figure shows refraction of light through three transparent rectangular blocks X, Y and Z.
The angle of refraction is the same in all blocks, but the angle of incidence is different.Compare the speed of light in X, Y and Z. Justify your answer.
Solve with AIWritten solution
Explanation: Using Snell’s law:
For the same angle of refraction (r), the block with smaller angle of incidence (i) has smaller refractive index (n).
Thus,
- Block X has smallest refractive index → maximum speed
- Block Z has largest refractive index → minimum speed
Also,
So, greater n → lower v.
Comparison:
- 203 marks
Question 20
An object of height 10 cm is placed 25 cm away from the optical centre of a converging lens of focal length 15 cm.
Calculate the image distance and height of the image formed.Solve with AIWritten solution
Given:
Find:
- Image distance (v)
- Height of image (hᵢ)
Step 1: Using Lens Formula
Substitute the values:
Image distance (v) = +37.5 cm
(The positive sign indicates the image is formed on the opposite side of the lens — real image.)Step 2: Using Magnification Formula
Substitute:
Height of image (hᵢ) = -15 cm
(The negative sign indicates the image is inverted.)
- 213 marks
Question 21
A 4 cm tall object is placed perpendicular to the principal axis of a convex lens of focal length 20 cm.
The distance of the object from the lens is 15 cm.
Find the nature, position, and size of the image formed.Solve with AIWritten solution
Given: , (convex lens), (object in front of the lens).
Position of the image
The negative sign means the image is on the same side as the object, from the lens.
Size of the image
Nature of the image
- is negative, so the image is virtual.
- is positive, so the image is erect.
- , so the image is magnified.
The image is virtual, erect and magnified, tall, formed from the lens on the same side as the object. This is the convex lens acting as a magnifying glass, because the object is inside its focal length.

- 223 marks
Question 22
Define the following terms in the context of a diverging mirror:
(i) Principal focus(ii) Focal length
Draw a labelled ray diagram to illustrate your answer.
Solve with AIWritten solution
(i) Principal focus: It is the point on the principal axis of a diverging mirror (convex mirror) from which parallel rays of light appear to diverge after reflection.
(ii) Focal length: The focal length (f) is the distance between the pole (P) of the convex mirror and its principal focus (F).

- 233 marks
Question 23
Draw a ray diagram to show the path of a ray of light which falls obliquely on one of the faces of an equilateral triangular prism made of glass. Use and mark on it the angle of incidence (∠i) and the angle of deviation (∠D) ?
Solve with AIWritten solution
The ray is refracted twice: towards the normal as it enters the prism and away from the normal as it leaves. Both bends turn it towards the base of the prism.
- ∠i, the angle of incidence, is the angle between the incident ray and the normal at the face of entry.
- ∠D, the angle of deviation, is the angle between the incident ray produced forward and the emergent ray produced backward.

- 242 marks
Question 24
An object is placed 25 cm in front of a concave mirror of focal length 15 cm. Use the mirror formula and new Cartesian sign convention to determine the position of the image formed.
Solve with AIWritten solution
Given: Object distance cm (in front of mirror) Focal length cm (concave mirror)
Using mirror formula:
The negative sign indicates the image is formed in front of the mirror (real image).
Nature of image: Magnification
The image is real, inverted and enlarged, formed 37.5 cm in front of the concave mirror.

- 253 marks
Question 25
The image of a candle flame placed at a distance of 30 cm from a mirror is formed on a screen placed in front of the mirror at a distance of 60 cm from its pole. What is the nature of the mirror?
Find its focal length. If the height of the flame is 2.4 cm, find the height of its image.
State whether the image formed is erect or inverted.Solve with AIWritten solution
Nature of the Mirror: The image formed is real, which means the mirror must be a concave mirror since a real image is formed when the object is beyond the focal point of a concave mirror.
Given:
Step 1: Find the Focal Length Using Mirror Formula
The mirror formula is:
Substitute the values:
Simplifying:
So, the focal length of the mirror is -20 cm.
Step 2: Find the Height of the Image
The magnification is given by:
Substitute the values:
Solving for :
So, the height of the image is -4.8 cm, and the negative sign indicates that the image is inverted.
Summary:
- Mirror: concave
- Focal length:
- Height of image: (written )
- Image: real and inverted

- 263 marks
Question 26
A student has focused the image of a candle flame on a white screen using a concave mirror.
The situation is as given below:- Length of the flame (h) = 1.5 cm
- Focal length of the mirror (f) = 12 cm
- Distance of flame from the mirror (u) = 18 cm
If the flame is perpendicular to the principal axis of the mirror, calculate the following:
(a) Distance of the image from the mirror
(b) Length of the image
Also, if the distance between the mirror and the flame is reduced to 10 cm, what will be observed on the screen?
Draw a ray diagram to justify your answer.Solve with AIWritten solution
Given:
(a) Distance of the image from the mirror:
Using the mirror formula:
Substitute the given values:
∴ Distance of the image from the mirror = 36 cm
(b) Length of the image:
Magnification formula:
Substitute the values:
The image is magnified and inverted.
∴ Length of the image = 3 cm (inverted).
If the object distance is reduced to 10 cm:
When , the object lies between the pole and focus of the concave mirror.
In this case, the reflected rays diverge, and a virtual, erect, and magnified image is formed behind the mirror.Hence, no distinct image will be observed on the screen (since real images form only when the object is beyond the focal point).
Ray Diagram:

- 272 marks
Question 27
What is meant by power of a lens?
Solve with AIWritten solution
The power of a lens is the ability of the lens to converge or diverge the rays of light passing through it.
It is defined as the reciprocal of the focal length (in metres) of the lens.
where,
- = power of the lens (in dioptres, D)
- = focal length of the lens (in metres)
Note:
- If is positive, the lens is convex (converging).
- If is negative, the lens is concave (diverging).
- 283 marks
Question 28
A light ray enters from medium A to medium B as shown in the figure.
(a) Which one of the two media is denser with respect to the other medium? Justify your answer.
(b) If the speed of light in medium A is and in B is , what is the refractive index of B with respect to A?
Solve with AIWritten solution
(a)As seen from the figure, when the light ray travels from medium A to medium B, it bends towards the normal.
This means that medium B is optically denser than medium A.Conclusion:
(b)
Medium B is denser than medium A.The refractive index of a medium is defined as:
For medium A:
For medium B:
Now, refractive index of medium B with respect to A is given by:
Therefore:
- 292 marks
Question 29
(a) A ray of light skirting from diamond is incident on the interface separating diamond and water.
Draw a labeled ray diagram to show the refraction of light in this case.(b) Absolute refractive indices of diamond and water are 2.42 and 1.33 respectively.
Find the value of the refractive index of water with respect to diamond.Solve with AIWritten solution
(a) Ray Diagram:

Since the ray passes from a denser medium (diamond) to a rarer medium (water), it bends away from the normal.
(b) Calculation:Given:
Refractive index of water w.r.t. diamond:
Answer: Refractive index of water w.r.t. diamond = 0.55
- 305 marks
Question 30
(a) A security mirror used in a big showroom has a radius of curvature 5 m. If a customer is standing at a distance of 20 m from the cash counter, find the position, nature, and size of the image formed in the security mirror
(b) Neha visited a dentist in her clinic. She observed that the dentist was holding an instrument fitted with a mirror. State the nature of this mirror and the reason for its use in the instrument used by the dentist.
Solve with AIWritten solution
(a)
A security mirror is a convex mirror.
Given: m, m (convex mirror) m (object in front of mirror)
Using mirror formula:
Positive confirms image is behind the mirror.
Magnification:
Nature: Virtual, erect and diminished. Position: 2.22 m behind the mirror. Size: Highly diminished (about 0.11 times the object).
(b)
The dentist uses a concave mirror.
Reason: When the object (tooth) is placed within the focal length of a concave mirror, it produces a virtual, erect and magnified image, allowing the dentist to clearly examine the teeth.

- 315 marks
Question 31
Search mirrors are mirrors that are used to look for hidden objects underneath cars, as shown in the figure.
The hidden objects can be easily spotted as the mirror provides a wider field of view.(a) What type of mirrors are generally used to make search mirrors?
(b) With the help of a ray diagram, describe the nature of the image formed by the type of mirror identified in (a).
Solve with AIWritten solution
(a) Convex mirrors are generally used to make search mirrors.
(b)


A convex mirror provides a wide field of view, which helps in observing a larger area, such as the underside of vehicles.
Nature of the image formed by a convex mirror:
- Virtual (cannot be formed on a screen)
- Erect (upright)
- Diminished (smaller in size than the object)
Ray Diagram Explanation: When parallel rays fall on a convex mirror:
- The rays appear to diverge from a point behind the mirror (the focus).
- The image formed is virtual, erect, and smaller than the object.
Conclusion: Convex mirrors are ideal for search purposes because they allow a wider view and produce an erect, diminished image of the hidden objects.
- 325 marks
Question 32
An object is kept at a distance of 1m from a lens of power +2D:
(i) Identify the type of lens.(ii) Calculate its focal length and the distance of the image formed.
Solve with AIWritten solution
(i) Identify the type of lens:
The given lens has a positive power (+2D), so it is a convex lens or a converging lens.
(ii) Calculate the focal length and distance of the image formed:
The formula for power is:
Given that , we can calculate the focal length :
Now, using the lens formula:
We are given (since the object is at 1 m distance). Substituting the known values:
Thus, the image distance is 1 m. The image is formed at a distance of 1 m from the lens, on the other side.
The object is at , so this is the case: the image is real, inverted and the same size as the object, formed at on the other side.

- 335 marks
Question 33

The above image shows a thin lens of focal length 5m.
(i) What is the kind of lens shown in the above figure?(ii) If a real inverted image is to be formed by this lens at a distance of 7m from the optical center, then show with calculation where should the object be placed?
(iii) Draw a neatly labelled diagram of the image formation mentioned in (ii).
Solve with AIWritten solution
(i) Kind of Lens:
The lens shown in the figure is a convex lens. Convex lenses are converging lenses, and they have a positive focal length.
(ii) Where should the object be placed?
To find the position where the object should be placed, we use the lens formula:
Where:
- is the focal length of the lens,
- is the image distance,
- is the object distance.
Given:
- (positive for a convex lens),
- (real, inverted image, so is positive).
Substitute the values into the lens formula:
Rearranging the equation:
Taking the LCM of 7 and 5:
Thus:
So, the object should be placed at a distance of 17.5 m on the left of the convex lens.
(iii) Ray Diagram:
To form the ray diagram, follow these steps:
- Place the object at a distance of 17.5 m from the convex lens.
- A real, inverted image will form on the opposite side of the object at a distance of 7 m from the optical center.
Ray Diagram:

- 345 marks
Question 34
(a) A lens produces a magnification of -0.5. Is this a converging or diverging lens? If the focal length of the lens is 6 cm, draw a ray diagram showing the image formation in this case.
(b) A girl was playing with a thin beam of light from a laser torch by directing it from different directions on a convex lens held vertically. She was surprised to see that in a particular direction, the beam of light continues to move along the same direction after passing through the lens. State the reason for her observation. Draw a ray diagram to support your answer.
Solve with AIWritten solution
(a)
Magnification → negative sign means real and inverted image. Since |m| < 1, image is diminished. This is produced by a converging (convex) lens.
Finding object and image distance:
Using lens formula with cm:
Object is placed at 18 cm (beyond 2f = 12 cm), image forms at 9 cm on the other side — real, inverted, diminished.

(b)
When the beam of light passes through the optical centre of a convex lens, it travels without any deviation — it continues in the same direction.
Reason: Near the optical centre the two surfaces of the lens are almost parallel, so the lens behaves there like a thin parallel-sided slab. The ray bends at the first surface and bends back by the same amount at the second, so it emerges parallel to its original direction; for a thin lens the sideways shift is negligible. The ray therefore passes through without deviation.
Ray Diagram:

- 351 mark
Question 35
Assertion (A): Plane mirror always forms a virtual image.
Reason (R): Plane mirror forms a virtual image if the object is real.
Solve with AIAnswer
(A) Both assertion (A) and reason (R) are true and reason (R) is the correct explanation of assertion (A).
- Correct
(B) Both assertion (A) and reason (R) are true but reason (R) is NOT the correct explanation of assertion (A).
(C) Assertion (A) is true but reason (R) is false.
(D) Assertion (A) is false but reason (R) is true.
Option (B) is correct.
Explanation:
Assertion (A): A plane mirror always forms a virtual image. True: the image is formed behind the mirror and cannot be caught on a screen.
Reason (R): A plane mirror forms a virtual image if the object is real. True.
R only restates the case of a real object; it does not explain why the image is virtual. So both are true, but R is not the correct explanation of A.
(A) would need R to give the cause, which it does not.
(C) R is a true statement.
(D) A is a true statement.

- 361 mark
Question 36
Assertion (A):
The focal length of the convex mirror will increase if the mirror is placed in water.Reason (R):
The focal length of a convex mirror of radius is equal to .Solve with AIAnswer
(A) Both assertion (A) and reason (R) are true and reason (R) is the correct explanation of assertion (A).
(B) Both assertion (A) and reason (R) are true but reason (R) is NOT the correct explanation of assertion (A).
(C) Assertion (A) is true but reason (R) is false.
- Correct
(D) Assertion (A) is false but reason (R) is true.
Option (D) is correct.
Explanation:
Assertion (A): False. A mirror works by reflection, and its focal length depends only on its radius of curvature. Placing it in water does not change its shape, so the focal length does not change. (A lens is different: its focal length does depend on the surrounding medium.)
Reason (R): True. For a spherical mirror, .
(A) and (B) need A to be true, and it is not.
(C) R is a correct relation.

