The metals produced by various reduction processes are not very pure.
Question 174 marksAsked 2025Medium
The metals produced by various reduction processes are not very pure. They contain impurities which must be removed to obtain pure metals.
The most widely used process for refining impure metals is electrolytic refining.
In this process chemical effect of electric current is used.
(a) Name the materials used to make anode and cathode in the refining of copper by this process ?
(b) Name the salt of copper used as an electrolyte in this process and write its molecular formula ?
(c)
(i) What happens when a steady current is passed through the electrolyte? Name the part of the electrolytic cell where
1. pure copper is obtained and
2. impurities settle.
OR
(ii) How is copper obtained from its sulphide? Write chemical equations involved in the process ?
(a) The anode is made of impure copper, and the cathode is a thin strip of pure copper.
(b) The electrolyte is a solution of copper sulphate, CuSO4, acidified with a little dilute sulphuric acid (acidified copper sulphate solution).
(c) (i) When a steady current is passed through the electrolyte, copper from the impure anode dissolves into the electrolyte, and an equivalent amount of pure copper from the electrolyte is deposited on the cathode. So the anode becomes thinner and the cathode thicker. The soluble impurities go into the solution, whereas the insoluble impurities settle down at the bottom of the anode as anode mud.
Pure copper is obtained at the cathode.
The insoluble impurities settle at the bottom of the cell, below the anode (as anode mud).
OR
(c) (ii) Copper is low in the reactivity series, so it can be obtained from its sulphide ore, Cu2S, just by heating in air. Part of the sulphide is first converted into copper(I) oxide:
2Cu2S(s)+3O2(g)heat2Cu2O(s)+2SO2(g)
On further heating, the copper(I) oxide reacts with the remaining copper(I) sulphide to give copper metal:
2Cu2O(s)+Cu2S(s)heat6Cu(s)+SO2(g)
No reducing agent such as carbon is needed.
Electrolytic refining: the impure metal dissolves at the anode and rebuilds itself, pure, at the cathode.