(i) Steps of construction:
Step 1: Draw a rough figure of PQRS and mark PQ = 9 cm and QR = 4 cm on it.
Step 2: Draw the side PQ = 9 cm with a ruler.
Step 3: At P, draw a line perpendicular to PQ (use the protractor to make a 90° angle).
Step 4: Open the compass to 4 cm on the ruler. With the tip on P, cut the perpendicular. Mark this point S, so PS = 4 cm.
Step 5: At Q, draw another line perpendicular to PQ.
Step 6: With the same 4 cm opening and the tip on Q, cut this perpendicular. Mark this point R, so QR = 4 cm.
Step 7: Join R and S.
Check: Measure RS. It should be 9 cm, so the opposite sides are equal (R1). Measure the angles at R and S. They should be 90°, so all four angles are right angles (R2).

(ii) The ribbon goes once round all four sides of the name-plate:
9+4+9+4=26
She needs 26 cm of ribbon.