Confirming your payment

Skip to content

Practice Questions · Question 28 of 30

Read the passage and answer the questions that follow.

Question 284 marksMedium

Read the passage and answer the questions that follow.

A large coastal statue is made of thin copper sheets fixed to a framework of iron bars. Where the copper touches the iron, the two metals were originally kept apart by an insulating layer. Over many decades this layer crumbled away. Sea spray and rainwater then collected in the joints, and the iron bars were found to be badly corroded while the copper next to them was almost untouched. During repair, engineers replaced the iron bars with a corrosion-resistant steel and placed a thin non-conducting plastic (PTFE) layer between the two metals.

(E∘E^\circ: Cu2+/Cu=+0.34\text{Cu}^{2+}/\text{Cu} = +0.34 V; Fe2+/Fe=−0.44\text{Fe}^{2+}/\text{Fe} = -0.44 V; O2,4H+/2H2O=+1.23\text{O}_2, 4\text{H}^+/2\text{H}_2\text{O} = +1.23 V)

Class 12 Chemistry Electrochemistry Question 28

(i) At a wet joint where the copper touches the iron:

(A) copper is oxidised to Cu2+\text{Cu}^{2+}    (B) iron is reduced    (C) iron is oxidised to Fe2+\text{Fe}^{2+}    (D) neither metal changes, because they are in contact [1]

(ii) Write the reaction at the anode and the reaction that takes place on the copper surface at a wet joint. [1]

(iii) Why did the iron corrode much faster once sea spray began to collect in the joints? [1]

(iv) Explain how the non-conducting PTFE layer stops this type of corrosion. [1]