A sonometer wire has a vibrating length of 0.80 m and a linear mass density of 5.0 × 10^ -3 kg m^ -1 .
Question 324 marksHard
A sonometer wire has a vibrating length of 0.80 m and a linear mass density of 5.0×10−3kg m−1. It is stretched by a tension of 80 N.
(a) Find the speed of transverse waves on the wire.
(b) Find the fundamental frequency of the wire and the frequencies of the next two harmonics.
(c) Which harmonic of the wire is set into resonance by a tuning fork of frequency 395 Hz?
(a) Wave speed:
v=μT=5.0×10−380=1.6×104=126.5m s−1≈126m s−1
(b) Fundamental and next two harmonics: the wire is fixed at both ends, so a whole number of half-wavelengths must fit its length: L=nλ/2, which gives
νn=2Lnv,n=1,2,3,…
Fundamental (n=1):
ν1=2×0.80126.5=79.1Hz
The next two harmonics are whole multiples of this: ν2=2ν1=158Hz and ν3=3ν1=237Hz.
(c) Harmonic excited by a 395 Hz fork: the wire resonates only when the fork's frequency matches one of its natural frequencies νn=nν1. Using the unrounded fundamental ν1=79.06 Hz,
n=79.06395=5.00
so the fork excites the 5th harmonic: 5×79.06=395.3Hz≈395 Hz. In this mode the wire vibrates in five loops, with six nodes (including the two fixed ends).
The neighbouring harmonics do not match: the 4th harmonic is 4×79.06=316 Hz and the 6th is 6×79.06=474 Hz, each about 79 Hz away from the fork's frequency. Only a whole-number multiple of ν1 can resonate, and 5 is the only one that lands on 395 Hz.