Let a=2 cm and r=0.2 cm.
(i) Number of pips and the effect of one pip.
1+2+3+4+5+6=21 pips
Scooping one pip removes a flat circle of area πr2 from the face, but exposes the curved inside of a hemisphere, of area 2πr2. The net change is
2πr2−πr2=πr2
an increase of πr2 for each pip.
(ii) Total surface area.
πr2=3.14×0.2×0.2=0.1256 cm2
TSA=6a2+21πr2=6×4+21×0.1256=24+2.6376=26.6376 cm2
So the die has a surface area of about 26.64 cm².
(iii) Volume of wood.
Step 1 — volume of the cube.
a3=23=8 cm3
Step 2 — volume removed by the pips.
21×32πr3=21×32×3.14×0.008=14×3.14×0.008=0.35168 cm3
Step 3 — subtract.
8−0.35168=7.64832 cm3
So the die contains about 7.65 cm³ of wood.
Check: each pip is only 0.2 cm deep and 0.4 cm across, so even six pips fit easily on a 2 cm face; and the surface area goes up (26.64>24) while the volume goes down (7.65<8), as expected when material is scooped out.