First, check the shape makes sense
The two largest faces are the 12 cm × 10 cm faces, and there are two of them, opposite one another.
Each depression has radius 3.5 cm, so it is 7 cm across. That fits comfortably on a face 10 cm wide.
Each one is also 3.5 cm deep. The block is 8 cm thick, and two depressions reach 3.5+3.5=7 cm into it, which is less than 8 cm. So they do not meet in the middle, and the block is not pierced.
(i) Volume of iron remaining
Volume of the solid cuboid
Vcuboid=l×b×h=12×10×8
Vcuboid=960 cm3
Volume of one hemispherical scoop
Vhemisphere=32πr3=32×722×(3.5)3
(3.5)3=42.875
Vhemisphere=32×722×42.875=32×134.75
Vhemisphere≈89.83 cm3
There are two scoops, so subtract both
Vremaining=960−2×89.83=960−179.67
Vremaining≈780.33 cm3
(ii) Total surface area of the resulting solid
Scooping changes the surface in two ways at once, and you must handle both.
Start with the whole cuboid
TSA=2(lb+bh+hl)=2(12×10+10×8+8×12)
=2(120+80+96)=2×296
=592 cm2
Take away what was lost
Each scoop opens a circular hole in a face, and that circle of metal is no longer there:
2×πr2=2×722×12.25=2×38.5=77 cm2
Add what was newly exposed
You can now see into each bowl. The inside of a hemispherical bowl is its curved surface:
2×2πr2=2×77=154 cm2
Put the three parts together
TSA=592−77+154
=515+154
TSA=669 cm2
The point to take away
The volume went down (from 960 to 780.33 cm³) because metal was removed.
But the surface area went up (from 592 to 669 cm²), because each bowl's curved inside, 2πr2, is twice the area of the flat circle πr2 it replaced.
Removing material does not always reduce surface area. Always ask separately: what surface was lost, and what surface was uncovered?