A long horizontal pipe has an internal radius of 20 cm and is partly filled with water.
Question 273 marksMedium
A long horizontal pipe has an internal radius of 20 cm and is partly filled with water. The figure shows a cross-section of the pipe with centre O: the water surface AB is 10 cm above the lowest point of the pipe.
(i) Find ∠AOB. [1]
(ii) Find the area of the cross-section of the water. [1]
(iii) Find the length of the pipe's inner wall that is in contact with the water in this cross-section. [1]
(Use π=3.14 and 3=1.73)
(i) The angle AOB.
Draw OM⊥AB. M lies on the vertical line through O, so
OM=20−10=10cm
In right triangle OMA, with hypotenuse OA=20 cm:
cos∠AOM=OAOM=2010=21⇒∠AOM=60∘
OM bisects ∠AOB, so ∠AOB=2×60∘=120∘.
(ii) Area of the water (minor segment).
Half-chord:
AM=202−102=300=103=17.3cm,AB=34.6cmArea of sector OAB=360∘120∘×3.14×202=31256≈418.67cm2Area of △OAB=21×AB×OM=21×34.6×10=173cm2Area of water=418.67−173=245.67cm2
(iii) Wall in contact with the water (minor arc AB).
360∘120∘×2×3.14×20=3125.6≈41.87cm
Check: the water lies below the centre, so it must fill less than half the pipe. Half the cross-section is 21×3.14×400=628cm2, and 245.67<628 ✓. Likewise the wetted arc is 31 of the circumference 125.6 cm ✓.