Opening your dashboard
Class 9 Physics Chapter 2: Sound Question Answers
Part of the Class 9 Science syllabus, filed here under Physics. 17 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 2, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
17 questions with solutions
Mixed difficulty
- 1
Question 1
What is sound and how is it produced?
Solve with AIWritten solution
Answer :
Sound is a form of mechanical energy that produces a sensation of hearing.
When an object is set into vibrations, sound is produced.
- 2
Question 2
Describe with the help of a diagram how compressions and
rarefactions are produced in air near a source of sound.Solve with AIWritten solution
When an object vibrates, it forces the particles of the medium around it to vibrate as well.-
As the object moves forward, it pushes and compresses the air in front of it, creating a region of high pressure. This region is called a compression.
-
As the object moves backward, it creates a region of low pressure. This region is called a rarefaction.
-
As the object continues to vibrate (moving backward and forward), a series of compressions and rarefactions are produced in the air.
These successive compressions and rarefactions cause sound waves to propagate through the medium.
-
- 3
Question 3
Why is a sound wave called a longitudinal wave?
Solve with AIWritten solution
Answer :
Sound wave is called a longitudinal wave because the particles of the medium vibrate in the same direction as the direction of propagation of the wave.
- 4
Question 4
Which characteristic of sound helps you to identify your
friend by his voice while sitting with others in a dark room?Solve with AIWritten solution
Answer :
The characteristic of sound is called quality or timbre.
- 5
Question 5
Flash and thunder are produced simultaneously. But
thunder is heard a few seconds after the flash is seen. Why?Solve with AIWritten solution
Answer :
The speed of sound in air at ( 0^\circ \text{C} ) is
[ 330 \ \text{m/s} ]
Whereas the speed of light is
[ 3 \times 10^8 \ \text{m/s} ]
When we compare the two, the speed of light is much greater than the speed of sound.
Therefore, during a thunderstorm, the flash of lightning is seen a few seconds before the sound of thunder is heard.
- 6
Question 6
A person has a hearing range from 20 Hz to 20 kHz. What
are the typical wavelengths of sound waves in air
corresponding to these two frequencies? Take the speed of
sound in air as 344 m/s.Solve with AIWritten solution
Answer :
When
[ \nu = 20 \ \text{Hz} ]
Speed of sound in air,
[ v = 344 \ \text{m/s} ]
We know,
[ v = \lambda \nu ]
[ \lambda = \frac{v}{\nu} ]
[ \lambda = \frac{344}{20} ]
[ \lambda = 17.2 \ \text{m} ]
When
[ \nu = 20 \ \text{kHz} = 20{,}000 \ \text{Hz} ]
[ \lambda = \frac{344}{20000} ]
[ \lambda = 0.0172 \ \text{m} ]
Thus, the wavelength of sound corresponding to ( 20 \ \text{Hz} ) and ( 20 \ \text{kHz} ) is
[ 17.2 \ \text{m} ]
and
[ 0.0172 \ \text{m} ]
respectively.
- 7
Question 7
Two children are at opposite ends of an aluminum rod. One
strikes the end of the rod with a stone. Find the ratio of
times taken by the sound wave in air and in aluminum to
reach the second child.Solve with AIWritten solution
Answer :
Speed of sound in air,
[ V_1 = 346 \ \text{m/s} ]
Speed of sound in aluminium,
[ V_2 = 6420 \ \text{m/s} ]
Let the length of the aluminium rod be ( x ) m.
We know,
[ \text{Speed} = \frac{\text{Distance}}{\text{Time}} ]
[ \text{Time} = \frac{\text{Distance}}{\text{Speed}} ]
Time taken in air:
[ t_1 = \frac{x}{346} ]
Time taken in aluminium:
[ t_2 = \frac{x}{6420} ]
Required ratio:
[ \frac{t_1}{t_2} \frac{\frac{x}{346}}{\frac{x}{6420}}\frac{x}{346} \times \frac{6420}{x} ]
[ = \frac{6420}{346} ]
[ \approx 18.55 ]
Hence, the ratio of time taken by sound in air to that in aluminium is
[ 18.55 : 1 ]
- 8
Question 8
The frequency of a source of sound is 100 Hz. How many
times does it vibrate in a minute?Solve with AIWritten solution
Answer :
Frequency of sound,
[ \nu = 100 \ \text{Hz} ]
Time taken,
[ t = 1 \ \text{minute} = 60 \ \text{s} ]
We know,
[ \text{Frequency} = \frac{\text{Number of oscillations}}{\text{Time taken}} ]
[ \text{Number of oscillations} = \nu \times t ]
[ = 100 \times 60 ]
[ = 6000 ]
Hence, the number of oscillations is
[ 6000 ]
- 9
Question 9
Does sound follow the same laws of reflection as light does?
Explain.Solve with AIWritten solution
Answer :
Yes, sound follows the same laws of reflection as light because:
(i) The angle of incidence of sound is equal to the angle of reflection of sound waves.
(ii) The incident sound wave, the reflected sound wave, and the normal at the point of incidence all lie in the same plane.
- 10
Question 10
When a sound is reflected from a distant object, an echo is
produced. If the distance between the reflecting surface
and the source of sound remains the same, do you hear the
echo on a hotter day?Solve with AIWritten solution
Answer :
[ \text{Time} = \frac{\text{Distance}}{\text{Speed}} ]
Time is inversely proportional to speed. As the temperature increases, the speed of sound increases.
Therefore, on a hot day, the speed of sound is higher. Hence, the time taken for the echo to return decreases, and we hear the echo sooner.
- 11
Question 11
Give two practical applications of the reflection of sound waves.
Solve with AIWritten solution
Answer :
Reflection of sound is used in megaphones, horns, and musical instruments such as trumpets and shehnai.
It is used in a stethoscope for hearing a patient’s heartbeat.
The ceilings of concert halls are curved so that sound, after reflection, reaches all corners of the hall.
(Any two practical applications can be written.)
- 12
Question 12
A stone is dropped from the top of a tower 500 m high into a
pond of water at the base of the tower. When is the splash
heard at the top? Given, g = 10 m/s² and speed of sound
= 340 m/s.Solve with AIWritten solution
Answer :

Distance covered by the stone,
Initial velocity,
Acceleration due to gravity,
Using the equation of motion:
Thus, in 10 seconds, the stone reaches the pond.
Speed of sound,
Time taken by sound to travel 500 m:
Total time taken to hear the splash:
Hence, the splash will be heard after
- 13
Question 13
A sound wave travels at a speed of 339 m/s. If its wavelength
is 1.5 cm, what is the frequency of the wave? Will it be
audible?Solve with AIWritten solution
Answer :
Speed of sound,
[ v = 339 \ \text{m/s} ]
Wavelength,
[ \lambda = 1.5 \ \text{cm} = 0.015 \ \text{m} ]
We know,
[ \text{Frequency} = \frac{\text{Speed}}{\text{Wavelength}} ]
[ \nu = \frac{339}{0.015} ]
[ \nu = 22600 \ \text{Hz} ]
Since ( 22600 \ \text{Hz} ) is greater than ( 20{,}000 \ \text{Hz} ) (upper limit of human hearing),
the sound will not be audible.
- 14
Question 14
What is reverberation? How can it be reduced?
Solve with AIWritten solution
Answer :
The persistence of sound in an auditorium due to repeated reflections of sound is called reverberation.
To reduce the undesirable effects of reverberation, the roofs and walls of the auditorium are covered with sound-absorbing materials such as compressed fibreboard, rough plaster, or draperies.
The seats are also made of materials having good sound-absorbing properties.
- 15
Question 15
What is the loudness of sound? What factors does it depend on?
Solve with AIWritten solution
Answer :
The loudness of a sound is determined by its amplitude. The amplitude of a sound wave depends upon the force with which an object is made to vibrate.
A loud sound can travel a larger distance because it is associated with higher energy.
A sound wave spreads out from its source. As it moves away from the source, its amplitude as well as its loudness decreases.

- 16
Question 16
How is ultrasound used for cleaning?
Solve with AIWritten solution
Answer :
Ultrasound is used to clean parts located in hard-to-reach places such as spiral tubes, odd-shaped parts, and electronic components.
The objects to be cleaned are placed in a cleaning solution, and ultrasonic waves are passed through the solution. Due to the high frequency of these waves, dust particles and grease detach from the objects and settle down.
Thus, the objects are cleaned thoroughly.
- 17
Question 17
Explain how defects in a metal block can be detected using
ultrasound.Solve with AIWritten solution
Answer :
Ultrasound is used to detect cracks and flaws in metal blocks.
Metallic components are used in the construction of large structures such as buildings, bridges, machines, and scientific equipment. Cracks or holes inside metal blocks, which may not be visible from the outside, can reduce the strength of the structure.
Ultrasonic waves are passed through the metallic block, and detectors are used to receive the transmitted waves. If there is even a small defect inside the block, the ultrasonic waves get reflected back, indicating the presence of a flaw or defect.

What Class 9 Physics Ch 2 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01Production Of Sound
- 02Propagation of Sound
- 03Characteristics of a Sound Wave
- 04Reflection Of Sound
- 05Range of Hearing
- 06Applications Of Ultrasound
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 2 before.
Class 9 Physics Ch 2 questions students ask
How many questions are there in Class 9 Physics Ch 2?
17 questions. Every one is solved step by step on this page.
Are these Class 9 Physics question answers free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 9 Physics Ch 2 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
