Opening your dashboard
Class 9 Physics Chapter 3: Work, Energy, and Simple Machines Question Answers
Part of the Class 9 Science syllabus, filed here under Physics. 29 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 3, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
29 questions with solutions
2–5 marks · Medium difficulty
- 13 marks
Question 1
What will be the magnitude of velocity of the child at the bottom of the blue slide? Will two children of different masses reach the bottom of the same slide with the same velocity? Which of the slides will result in the largest magnitude of velocity for the child at its bottom?
Solve with AIWritten solution
(i) Speed at the bottom of the blue slide: At the top, the child (mass ) at height has potential energy and starts from rest. Neglecting friction, all of it changes into kinetic energy at the bottom:
So the magnitude of velocity at the bottom is , where is the vertical height of the top of the blue slide above its bottom.
(ii) Children of different masses: Yes. The mass cancels from both sides, so does not depend on mass. Two children starting from the top of the same slide reach the bottom with the same speed (neglecting friction).
(iii) Which slide gives the largest speed: The speed depends only on the vertical height , not on the shape or length of the slide. The slide whose top is highest above its bottom gives the largest speed; slides that start from the same platform height give the same speed, whether they are straight or spiral.
- 22 marks
Question 2
In the previous chapter, a weightlifter is shown holding a barbell steady in her hands. Is she doing any work on the barbell while holding it steady?
Solve with AIWritten solution
No, she is not doing any mechanical work on the barbell while holding it steady.
Reason: Work = Force × Displacement. Since the barbell does not move, its displacement is zero, so the work done on the barbell is zero.
- 32 marks
Question 3
Is the work done by friction on the stack of coins that travels on a rough surface (Fig. 6.13c) positive, negative or zero?
Solve with AIWritten solution
The work done by friction is negative.
Reason: Friction acts opposite to the direction of motion. A force opposite to displacement does negative work and removes kinetic energy from the moving coins.
- 42 marks
Question 4
When you pedal a bicycle on a flat road, your muscles supply energy. In what forms does this muscular energy appear as you ride?
Solve with AIWritten solution
The energy supplied by your muscles appears as:
- Kinetic energy of the bicycle and rider.
- Thermal energy (heat) due to friction in the bicycle parts and with the road.
- 52 marks
Question 5
Two objects A and B of mass m and 4m have the same kinetic energy. What is the ratio of the magnitude of velocities of A and B?
Solve with AIWritten solution
Let the velocities of A and B be and . Masses are and , and the kinetic energies are equal:
Therefore, .
- 62 marks
Question 6
Does the kinetic energy of an object which moves with constant velocity change with its position?
Solve with AIWritten solution
No. Since KE = ½mv² and the velocity remains constant, the kinetic energy remains constant and does not depend on position.
- 72 marks
Question 7
Does the potential energy of an object near the surface of the Earth change if it moves with constant velocity in the horizontal direction? What if the object is gradually raised in the vertical direction?
Solve with AIWritten solution
(a) Horizontal motion with constant velocity: Height does not change. Therefore, gravitational potential energy remains unchanged.
(b) Gradually raised vertically: Height increases. Since PE = mgh, potential energy increases as the object is raised.
- 83 marks
Question 8
For the situation depicted in figure calculate the mechanical energy of the ball just before it hits the ground and show that even at this position, it is mgh.
Solve with AIWritten solution
At the highest point, the ball has:
Potential Energy = mgh
Kinetic Energy = 0
So, total mechanical energy = mgh.
Just before the ball hits the ground:
Height = 0, so Potential Energy = 0
The ball's velocity is v, so Kinetic Energy = ½mv²
Using v² = 2gh,
KE = ½m(2gh) = mgh
Therefore, the mechanical energy just before the ball hits the ground is
ME = KE + PE = mgh + 0 = mgh
The mechanical energy just before the ball hits the ground is mgh.
- 93 marks
Question 9
You may have seen an exhibit like that in figure in a science park, where a ball is released from the highest point. Describe how the kinetic energy and potential energy change at points A, B and C. Why do subsequent points, such as C, D and E, usually have lower heights compared to the previous ones? Could it have anything to do with the energy lost due to friction?
Solve with AIWritten solution
At A: A is a high point of the track. The ball has a large potential energy and, being slowest there, a small kinetic energy.
From A to B: As the ball rolls down, its height decreases, so potential energy decreases and kinetic energy increases. At B, the lowest point between A and C, potential energy is minimum and kinetic energy is maximum.
From B to C: As the ball climbs, kinetic energy changes back into potential energy. At C the potential energy is again large and the kinetic energy small.
Why C, D and E are lower: If there were no friction, the mechanical energy (kinetic + potential) would stay constant and the ball could rise again to its starting height. In reality, friction between the ball and the track (and air resistance) does negative work on the ball, so part of its mechanical energy changes into thermal energy (and some sound) at every stage. With less mechanical energy left, the ball can only rise to a smaller height, so each later point (C, D, E) must be lower than the previous one for the ball to go over it.
Yes, it is because of the energy lost due to friction.
- 105 marks
Question 10
State whether the following statements are True or False, and give reasons:
(i) Work is said to be done when a force is applied, even if the object does not move.
(ii) Lifting a bucket vertically upward results in positive work done on the bucket.
(iii) The SI unit for both work and energy is joule (J).
(iv) A motionless stretched rubber band has kinetic energy.
(v) Energy can change from one form to another.
Solve with AIWritten solution
(i) False. In physics, the primary condition for work to be done requires displacement. The formula is Work = Force × Displacement. In case displacement is zero, work done is also zero.
(ii) True. In physics, work is done only when there is displacement. The formula for work is: W = F × d. Lifting a bucket vertically upward moves it in the direction of the applied force, so positive work is done.
(iii) True. Energy is the capacity to do work, and the work done on an object equals the change in its energy (work-energy theorem). So both are measured in the same unit, the joule: 1 J = 1 N m.
(iv) False. Kinetic energy is the energy possessed by a moving object. If an object is at rest, its velocity is zero, so it has no kinetic energy; however, it may store elastic potential energy instead.
(v) True. According to the law of conservation of energy, energy can neither be created nor destroyed; it can only change from one form to another, such as electrical energy changing into light energy.
- 115 marks
Question 11
Fill in the blanks:
(i) Work done = ______ × ______ (in the direction of force).
(ii) 1 joule of work is done when a force of ______ newton displaces an object by 1 metre in the direction of the force.
(iii) The expression for kinetic energy of a body of mass m and velocity v is ______.
(iv) The potential energy of an object of mass m at a small height h from the Earth's surface is ______.
(v) Power is defined as the ______ at which work is done.
Solve with AIWritten solution
(i) Work done = force × displacement (in the direction of force).
(ii) 1 joule of work is done when a force of 1 (one) newton displaces an object by 1 metre in the direction of the force.
(iii) The expression for kinetic energy of a body of mass m and velocity v is ½mv².
(iv) The potential energy of an object of mass m at a small height h from the Earth's surface is mgh.
(v) Power is defined as the rate at which work is done.
- 122 marks
Question 12
When a ball thrown upwards reaches its highest point, tick which of the following statement(s) are correct?
(i) The force acting on the ball is zero.
(ii) The acceleration of the ball is zero.
(iii) Its kinetic energy is zero.
(iv) Its potential energy is maximum.
Solve with AIWritten solution
Correct statements: (iii) and (iv)
Explanation:
- (i) is wrong: the gravitational force still acts downward on the ball.
- (ii) is wrong: the acceleration is still , directed downward.
- (iii) is correct: the velocity is momentarily zero, so .
- (iv) is correct: the height is maximum, so is maximum.
- 135 marks
Question 13
For each of the following situations, identify the energy transformation that takes place:
(i) A truck moving uphill
(ii) Unwinding of a watch spring
(iii) Photosynthesis in green leaves
(iv) Water flowing from a dam
(v) Burning of a matchstick
(vi) Explosion of a firecracker
(vii) Speaking into a microphone
(viii) A glowing electric bulb
(ix) A solar panel
Solve with AIWritten solution
(i) A truck moving uphill: The engine burns fuel, and the chemical energy of the fuel is used to drive the truck up the slope. As the truck gains height, it gains gravitational potential energy (it also has kinetic energy while moving, and some energy becomes heat). Energy transformation: Chemical energy (of fuel) to Potential energy (and Kinetic energy)
(ii) Unwinding of a watch spring: A wound spring stores elastic potential energy. When it unwinds, this stored energy is used to produce motion in the hands of the watch. Energy transformation: Potential energy to Kinetic energy
(iii) Photosynthesis in green leaves: Plants use sunlight to prepare food during photosynthesis. Light energy is converted into stored chemical energy in plants. Energy transformation: Light energy to Chemical energy
(iv) Water flowing from a dam: Water stored at height has potential energy. As it flows downward, this energy changes into energy of motion. Energy transformation: Potential energy to Kinetic energy
(v) Burning of a matchstick: The chemical energy stored in the matchstick is released as heat and light when it burns. Energy transformation: Chemical energy to Heat energy + Light energy
(vi) Explosion of a firecracker: Firecrackers contain chemical energy, which is suddenly released as heat, light, sound, and kinetic energy. Energy transformation: Chemical energy to Heat + Light + Sound + Kinetic energy
(vii) Speaking into a microphone: When a person speaks, sound energy is produced and converted into electrical signals by the microphone. Energy transformation: Sound energy to Electrical energy
(viii) A glowing electric bulb: Electrical energy supplied to the bulb is converted into light and heat. Energy transformation: Electrical energy to Light energy + Heat energy
(ix) A solar panel: Solar panels convert sunlight directly into electrical energy. Energy transformation: Light energy to Electrical energy.
- 144 marks
Question 14
A student is slowly lifted straight up in an elevator from the ground level to the top floor of a building. Later, the same student climbs the staircase, all the way to the top. Given that the height of the building is h = 72.5 m, acceleration due to gravity is g = 10 m/s², and student's mass is m = 50 kg.
(i) Find the gain in the potential energy if the student is lifted straight up to the top.
(ii) Find the gain in potential energy when the student climbs the stairs to the same top.
(iii) What do you conclude about the dependence of the potential energy on the path taken?
Solve with AIWritten solution
(i) The gain in gravitational potential energy is given by:
PE = mgh
Substituting the values:
PE = 50 × 10 × 72.5 = 50 × 725 = 36250 J
The gain in potential energy = 36,250 J
(ii) The gain in potential energy will be the same as in part (i), because the height reached is the same. So, Gain in potential energy = 36,250 J. Potential energy depends only on mass, gravity, and height, not on how the height is reached.
(iii) The potential energy does not depend on the path taken; it depends only on the initial and final positions (vertical height). Whether the student goes straight up in an elevator or climbs the stairs, the gain in potential energy remains the same because both reach the same height.
- 154 marks
Question 15
A crane lifts a mass m to the 10th floor of a building in a certain time. It then raises the same mass to the 20th floor of the same building in double the time. How much more energy and power are required? Assume that the height of all floors is equal.
Solve with AIWritten solution
Let height of each floor = h
Height to 10th floor = 10h
Height to 20th floor = 20h
Energy = mgh
For 10th floor: E1 = mg(10h) = 10mgh
For 20th floor: E2 = mg(20h) = 20mgh
So, E2 = 2E1
Energy required is double.
Power = Work / Time
Let time for 10th floor = t
Time for 20th floor = 2t
P1 = E1/t = 10mgh/t
P2 = E2/2t = 20mgh/2t = 10mgh/t
So, P2 = P1
Power required remains the same. Energy required is doubled. Power required remains the same.
- 164 marks
Question 16
Which factors determine the energy required to raise a flag from the ground to the top of a tall flagpole using a pulley? Does raising the flag slowly or quickly change the amount of work done? If the speed at which the flag is raised is doubled, how does the power requirement change? Explain your answers.
Solve with AIWritten solution
Factors determining the energy required: The energy required to raise the flag is equal to the gain in its gravitational potential energy.
Potential energy (PE) = mgh
Therefore, the factors are:
Mass of the flag (m)
Height of the flagpole (h)
Acceleration due to gravity (g)
Effect of speed on work done: Raising the flag slowly or quickly does NOT change the amount of work done. Work done depends only on force and displacement (W = mgh in this case), not on time or speed. Since the flag is raised to the same height, the work done remains the same in both cases.
Effect on power when speed is doubled: Power is defined as: Power = Work / Time
If the speed of raising the flag is doubled, the time taken becomes half.
So, New power = Work / (Time/2) = 2 × (Work/Time)
Therefore, power becomes double.
Conclusion: Energy depends on mass, height, and gravity. Work done remains the same whether the flag is raised slowly or quickly. If speed is doubled, the power required also doubles.
- 173 marks
Question 17
A man of mass 60 kg rides a scooter of mass 100 kg. He accelerates the scooter to a velocity v. The next day, his son with a mass of 40 kg joins him as a passenger. If the scooter reaches the same speed on both days in the same time interval, what is the ratio of the fuel of the tank used on the two days? Assume that the energy transfer to the scooter happens entirely due to fuel, and no other losses occur due to air resistance and friction.
Solve with AIWritten solution
Fuel consumption is proportional to energy required.
Energy required = Kinetic Energy (KE) — according to speed
KE = ½mv²
Since the final velocity is the same on both days, KE depends only on the total mass.
Day 1: Mass of man = 60 kg, Mass of scooter = 100 kg, Total mass = 60 + 100 = 160 kg
Kinetic energy: KE1 = ½ × 160 × v²
Day 2: Mass of man = 60 kg, Mass of son = 40 kg, Mass of scooter = 100 kg
Total mass = 60 + 40 + 100 = 200 kg
Kinetic energy: KE2 = ½ × 200 × v²
Ratio of fuel used: Fuel consumption is proportional to KE
KE1 : KE2 = 160 : 200 = 4 : 5
The ratio of fuel used on the two days is 4 : 5.
- 183 marks
Question 18
A ball of mass 2 kg is thrown up with a velocity of 20 m/s.
(i) Identify the sign of the work done by gravity on the ball during its upward motion and its downward motion.
(ii) If the ball reaches a height of 19.4 m, how much work was done by air resistance (assume g = 10 m/s²)?
Solve with AIWritten solution
(i) Upward motion: Work done by gravity is negative (force opposite to motion).
Downward motion: Work done by gravity is positive (force in direction of motion).
(ii) Initial KE = ½mv² = ½ × 2 × (20)² = 400 J
Potential energy at height: PE = mgh = 2 × 10 × 19.4 = 388 J
Work done by air resistance = Change in mechanical energy = Final energy − Initial energy = 388 − 400 = −12 J
Work done by air resistance = −12 J
- 194 marks
Question 19
A 10.0 kg block is moving on a horizontal floor with negligible friction. A variable force is applied on the block in its direction of motion from its position at 0 m till 4 m. The force-displacement graph (Fig. 7.37) shows the force increasing uniformly from 0 N at 0 m to 50 N at 1 m, staying constant at 50 N from 1 m to 3 m, and decreasing uniformly to 0 N at 4 m. If the block had a kinetic energy of 180 J when it was at 0 m, find the block's speed (i) at 0 m, and (ii) at 4 m. Does the block have negative acceleration in any portion of its motion?
Solve with AIWritten solution
Given: Mass = 10 kg
Initial KE = 180 J
(i) Speed at 0 m:
KE = ½mv² = 180 = ½ × 10 × v²
v² = 36, v = 6 m/s
Work done = Area under force-displacement graph
From the graph:
0-1 m = triangle = ½ × 1 × 50 = 25 J
1-3 m = rectangle = 2 × 50 = 100 J
3-4 m = triangle = ½ × 1 × 50 = 25 J
Total work = 25 + 100 + 25 = 150 J
Final KE = Initial KE + Work = 180 + 150 = 330 J
(ii) Speed at 4 m:
330 = ½ × 10 × v², v² = 66, v = √66 = 8.12 m/s
Negative acceleration: No. Friction is negligible and the applied force is in the direction of motion throughout (it only becomes smaller between 3 m and 4 m, reaching zero at 4 m). So the acceleration is never opposite to the motion; the block keeps speeding up until 4 m.
- 203 marks
Question 20
The gravitational attraction on the surface of the Moon is about 1/6th of that on the surface of the Earth. An astronaut can throw a ball up to a height of 8 m from the surface of the Earth. How far up will the ball thrown with the same upward velocity travel from the surface of the Moon?
Solve with AIWritten solution
The maximum height reached by a ball thrown upward depends on the acceleration due to gravity.
Using the relation: h = u² / (2g)
For the same initial velocity (u), height is inversely proportional to g: h ∝ 1/g
Given: Height on Earth = 8 m
Acceleration due to gravity on Moon = (1/6) × g(Earth)
Since gravity on the Moon is 1/6th of that on Earth, the height reached will be 6 times greater.
Height on Moon = 6 × 8 m = 48 m
The ball will rise to a height of 48 m on the surface of the Moon.
Due to lower gravitational pull on the Moon, the ball experiences less downward acceleration, allowing it to rise to a greater height for the same initial velocity.
- 215 marks
Question 21
A 1000 kg car is moving along a road at a constant speed. Suddenly, the driver notices some obstruction ahead and applies the brakes to come to a complete stop. The speed-time graph of the car, starting from the instant the driver spots the traffic ahead (Fig. 7.38), is described below:
- From A (t = 0 s) to B (t = 1 s) the graph is a horizontal line at 35 m/s.
- From B (t = 1 s) to C (t = 3 s) the speed falls along a straight line from 35 m/s to 0 m/s.
(i) Describe how the car moves between positions A and B.
(ii) Calculate the kinetic energy of the car at A.
(iii) State the work done by the brakes in bringing the car to a halt between B and C.
(iv) What does the kinetic energy of the car transform into?
Solve with AIWritten solution
(i) Between A and B, the car moves with a constant speed of 35 m/s. This is because the speed-time graph is a horizontal straight line in this interval, which shows that the speed does not change with time. Therefore, the car is in uniform motion with zero acceleration for this 1 s (the driver's reaction time before braking), covering 35 m/s × 1 s = 35 m.
(ii) Given: Mass of the car, m = 1000 kg, Speed at A, v = 35 m/s
Kinetic Energy = ½mv² = ½ × 1000 × (35)² = 500 × 1225 = 612500 J
The kinetic energy of the car at A is 6,12,500 J.
(iii) When the brakes are applied, the car slows down and finally stops at C. The work done by the brakes is equal to the change in kinetic energy of the car.
Initial kinetic energy at B = 6,12,500 J
Final kinetic energy at C = 0 J
Work done by brakes = Final KE − Initial KE = 0 − 612500 = −612500 J
The work done by the brakes is −6,12,500 J. The negative sign shows that the braking force acts opposite to the direction of motion of the car.
(iv) The kinetic energy of the car is mainly transformed into heat energy due to friction between the brake pads and the wheels and between the tyres and the road. A small part may also be converted into sound energy.
- 223 marks
Question 22
The potential energy-displacement graph of a 0.5 kg ball moving along a frictionless track (Fig. 7.39) is read as follows: the ball starts at O with potential energy 30 J; the potential energy at P is 20 J, at Q is 30 J and at R is 40 J. At O, the velocity of the ball is 0 m/s. Calculate the velocity of the ball at P, Q and R.
Solve with AIWritten solution
Mass of the ball, m = 0.5 kg
At point O: Velocity = 0 m/s, Potential energy = 30 J
Since the track is frictionless, the total mechanical energy of the ball remains constant.
At O: Kinetic energy at O = ½mv² = 0
So, total mechanical energy = Potential energy + Kinetic energy = 30 + 0 = 30 J
Therefore, at every point on the track: Potential energy + Kinetic energy = 30 J
From the graph: Potential energy at P = 20 J, Potential energy at Q = 30 J, Potential energy at R = 40 J
Now we calculate the velocity at each point.
At P: Kinetic energy at P = Total energy − Potential energy at P = 30 − 20 = 10 J
Using KE = ½mv², 10 = ½ × 0.5 × v², 10 = 0.25v², v² = 40, v = √40, v = 6.32 m/s
So, velocity at P = 6.32 m/s
At Q: Kinetic energy at Q = 30 − 30 = 0 J. Thus, v = 0 m/s. So, velocity at Q = 0 m/s; the ball momentarily stops at Q and rolls back.
At R: Potential energy at R = 40 J, which is greater than the total mechanical energy (30 J). This is not possible for the ball because its total energy remains constant at 30 J. Hence, the ball cannot reach point R. So, velocity at R cannot be calculated because the ball never reaches R.
Velocity at P = 6.32 m/s. Velocity at Q = 0 m/s. The ball cannot reach R.
- 234 marks
Question 23
A coconut of mass 1.5 kg falls from the top of a coconut tree onto the wet sand on a beach. The height of the tree is 10 m. On impact, the coconut comes to rest by making a depression in the sand.
(i) Calculate the velocity of the coconut just before it hits the sand.
(ii) Assume that the average resistive force of sand is 3000 N and all the coconut's energy is used to create the depression in the sand. Calculate the depth of the depression the coconut makes in the sand. Assume g = 10 m/s².
Solve with AIWritten solution
(i) Given:
Mass of coconut, m = 1.5 kg
Height, h = 10 m
Acceleration due to gravity, g = 10 m/s²
Initial velocity, u = 0
Using the equation: v² = u² + 2gh
v² = 0 + 2 × 10 × 10 = 200
v = √200 = 10√2, v = 14.14 m/s
The velocity of the coconut just before hitting the sand is 14.14 m/s.
(ii) Just before striking the sand, the coconut has kinetic energy equal to the loss in potential energy during the fall.
Kinetic energy on impact: KE = mgh = 1.5 × 10 × 10 = 150 J
This entire energy is used to do work against the resistive force of sand.
Work done = Force × distance
So, 150 = 3000 × d
d = 150/3000, d = 0.05 m, Converting into centimeters: 0.05 m = 5 cm
- 242 marks
Question 24
Explain why roads on hills are built to wind around in gentle slopes rather than going straight up (Fig. 4.26)?
Solve with AIWritten solution
A road that winds around a hill in gentle slopes works like an inclined plane of large length, which is a simple machine.
To raise a vehicle of mass to a height , the work that must be done against gravity is the same, , whichever path is taken. Along an inclined plane of length (ignoring friction),
so the mechanical advantage is .
A road going straight up has a very short length for the same height, so a very large force would be needed to drive (or walk) up it. A winding road makes much larger than , so the force needed at every moment is much smaller. For example, rising 100 m along a 1000 m long road needs a force of only about of the vehicle's weight (ignoring friction), instead of a force equal to the full weight. The work done is the same, but it is spread over a longer distance, so vehicles can climb the hill with less effort.
- 252 marks
Question 25
To reach a higher floor, we find climbing an inclined ladder easier in comparison to climbing a vertical ladder (Fig. 7.30). Explain why.
Solve with AIWritten solution
An inclined ladder acts like an inclined plane.
To reach a floor at height , a person of mass must gain the same potential energy on either ladder, so the total work done is the same (ignoring friction).
On a vertical ladder, the person moves only the distance , so they have to lift their full weight at every step.
On an inclined ladder, the person moves a longer distance along the ladder to rise the same height . Since
and , the force needed is less than the weight .
Hence, climbing the inclined ladder needs a smaller force (over a longer distance), which makes it easier.
- 262 marks
Question 26
Why is it easier to open the lid of a can by using a spoon as shown in Fig. 7.35?
Solve with AIWritten solution
The spoon acts as a lever.
-
Fulcrum: the rim of the can, on which the spoon rests.
-
Load: the force holding the lid tight, acting at the tip of the spoon under the edge of the lid.
-
Effort: the push applied by the hand at the other end of the spoon.
The tip of the spoon is very close to the rim, so the load arm is very short, while the handle makes the effort arm long. For a lever,
so
Since the effort arm is much longer than the load arm, the mechanical advantage is large. For example, an effort arm of 10 cm and a load arm of 1 cm give a mechanical advantage of 10, so a small push on the handle applies a force 10 times larger on the lid. This makes it easy to prise the lid open.
-
- 272 marks
Question 27
Why do you push an object closer to scissors fulcrum when you want to cut an object which is hard?
Solve with AIWritten solution
A pair of scissors is a lever. The screw joining the two blades is the fulcrum, the effort is applied at the handles, and the load is the resistance of the object being cut, between the blades.
For a lever,
so the force applied on the object is
A hard object needs a large cutting force. Pushing the object closer to the fulcrum makes the load arm shorter while the effort arm (handles) stays the same. The mechanical advantage, , increases, so the same effort from our hand applies a much larger force on the object. For example, halving the load arm doubles the force on the object.
- 283 marks
Question 28
Throughout history, many designs of perpetual machines (using wheels, weights or magnets) have been proposed but none actually work. Why do all real machines eventually slow down and stop? Explain in terms of work and energy.
Solve with AIWritten solution
Energy cannot be created. A machine does not create energy; it only transfers or changes energy from one form to another. The work we get out of a machine can never be more than the energy put into it.
Friction is always present. In every real machine there is friction at the moving parts (axles, wheels, bearings, contact surfaces) and air resistance. These forces act opposite to the motion, so they do negative work on the moving parts.
Mechanical energy is lost. This negative work changes part of the machine's mechanical energy (kinetic and potential energy) into thermal energy (heating of the parts) and sound. This energy spreads into the surroundings and is not changed back into useful mechanical energy.
So, if no fresh energy is supplied (from fuel, electricity or a push), the mechanical energy of the machine keeps decreasing. Its kinetic energy finally becomes zero, so it slows down and stops. A perpetual motion machine that keeps doing useful work forever would have to produce energy from nothing, which is impossible.
- 293 marks
Question 29
On a seesaw with sliding seats, a child is sitting on one side and an adult on the other side. The adult weighs twice that of the child. The seesaw however is balanced. Draw a figure which depicts this situation showing the distances from the fulcrum where the child and the adult are seated.
Solve with AIWritten solution
Given: Weight of the child ; weight of the adult ; the seesaw is balanced.
To find: How the distances of the child and the adult from the fulcrum compare, and a figure showing them.
Formula: A seesaw is a lever. When it is balanced,
Substitution: Let the adult sit at a distance from the fulcrum and the child at a distance on the other side.
Answer: The child must sit twice as far from the fulcrum as the adult. For example, if the adult sits 1 m from the fulcrum, the child sits 2 m from it on the other side.

What Class 9 Physics Ch 3 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01Work Done by a Constant Force
- 02The Work-Energy Theorem
- 03Forms of Energy
- 04Mechanical Energy
- 05Power
- 06Simple Machines
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 3 before.
Class 9 Physics Ch 3 questions students ask
How many questions are there in Class 9 Physics Ch 3?
29 questions. Every one is solved step by step on this page.
Are these Class 9 Physics question answers free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 9 Physics Ch 3 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
