Each robot moves in a "staircase": a horizontal step, then a vertical step, again and again. After every complete right-then-up (or right-then-down) move, the robot is at a corner point, and all these corner points lie on one straight line. The slope of that line is runrise of one complete move. We first find these lines and where they cross, and then check the actual staircase paths on a graph.
(i) Robot 1: starts at (0,0); each complete move is 3 right and 4 up. Its corner points are (0,0),(3,4),(6,8),(9,12),…, i.e. (3n,4n).
Slope =34, y-intercept =0, so the corners lie on
y=34x(1)
Robot 2: starts at (10,0); each complete move is 1 right and 2 up. Its corner points are (10,0),(11,2),(12,4),…, i.e. (10+m,2m).
Slope =12=2, and the line passes through (10,0): 0=2(10)+d gives d=−20, so
y=2x−20(2)
Solve (1) and (2) by substitution:
34x=2x−20⇒4x=6x−60⇒2x=60⇒x=30
y=34×30=40
Is (30,40) really on both paths? For Robot 1, (30,40)=(3×10,4×10): it is the corner reached after 10 complete moves. For Robot 2, (30,40)=(10+20,2×20): it is the corner reached after 20 complete moves. So both robots actually pass through (30,40).

Looking closely at the graph: because the paths are staircases and not straight lines, they also touch and share short pieces near (30,40). The first point they share is (24,28) (a turning point of both staircases, where Robot 2 just touches the foot of Robot 1's vertical step from (24,28) to (24,32)), and the last is (33,44). In between they share, for example, the stretches from (26,32) to (27,32) to (27,34) and from (30,38) to (30,40) to (31,40). Before (24,28) Robot 2's path stays to the right of Robot 1's, and after (33,44) it stays to the left (above), because Robot 2 climbs more steeply (slope 2 is greater than 34).
Answer (i): Yes, the paths intersect. The point where the two paths cross, the point that lies on both robots' corner lines and that both robots reach at the end of a complete move, is (30,40). (Strictly, the two staircases touch at several points close to it, from (24,28) to (33,44).)
(ii) Robot 1: starts at (3,0); each complete move is 5 right and 5 up. Corners: (3,0),(8,5),(13,10),…, i.e. (3+5n,5n).
Slope =55=1, through (3,0): 0=3+d gives d=−3:
y=x−3(3)
Robot 2: starts at (7,0); each complete move is 5 right and 3 down. Corners: (7,0),(12,−3),(17,−6),…, i.e. (7+5m,−3m).
Slope =5−3, through (7,0): 0=−53(7)+d gives d=521:
y=−53x+521,i.e.3x+5y=21(4)
Solve (3) and (4): substitute y=x−3 into (4):
3x+5(x−3)=21⇒8x=36⇒x=29=4.5,y=4.5−3=1.5
Check in (4): 3(4.5)+5(1.5)=13.5+7.5=21. So the two corner lines meet at (4.5,1.5).
But is this point on the paths? Robot 2 starts at x=7 and only ever moves to the right, so it never reaches x=4.5. Robot 1 is at y=0 for all x from 3 to 8, so it does not pass through (4.5,1.5) either. The lines meet at a point that neither robot visits: it lies between Robot 1's first two corners (3,0) and (8,5), which Robot 1 joins by a staircase and not by a straight line, and it lies behind Robot 2's starting point, which Robot 2 only moves away from.

Looking closely at the graph: Robot 1's very first move goes from (3,0) to (8,0) along the x-axis, and so it passes over (7,0), which is Robot 2's starting point. Robot 2's first move goes from (7,0) to (12,0). So the two traced paths share the short stretch from (7,0) to (8,0). After that, Robot 1 goes up (all its later points have y≥5 once x>8) and Robot 2 stays on or below the x-axis, so they never meet again.
Answer (ii): If we treat each path as the straight line through its corners, the lines meet at (4.5,1.5), but that point lies behind Robot 2's starting point and is not on either robot's path, so the robots' paths do not cross there. The only place the traced staircase paths actually meet is right at the start: they overlap along the x-axis from (7,0) to (8,0).