Confirming your payment

Skip to content

Opening your dashboard

Class 9 Chemistry Chapter 4: Structure of the Atoms Question Answers

Part of the Class 9 Science syllabus, filed here under Chemistry. 19 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.

AI Tutor

Get talked through Ch 4, not just shown the answer

Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.

  • Ask it out loud, in your own words
  • It gives you the next step, not the answer
  • Stuck on part (ii)? Start there
Ch 4 question answers

19 questions with solutions

1–5 marks · Mixed difficulty

  1. 1

    Question 1

    Compare the properties of electrons, protons, and neutrons.

    Medium
    5 marks
    Solve with AI
    Written solution
    Comparison of Electrons, Protons, and Neutrons
    • Charge:

      • Electrons carry a negative charge (−1-1).
      • Protons carry a positive charge (+1+1).
      • Neutrons have no charge, they are neutral.
    • Mass:

      • Electrons have a very small mass compared to protons and neutrons, approximately 9.11×10−319.11 \times 10^{-31} kg.
      • Protons have a relatively large mass, approximately 1.67×10−271.67 \times 10^{-27} kg.
      • Neutrons have a mass almost identical to protons, also around 1.67×10−271.67 \times 10^{-27} kg.
    • Location in Atom:

      • Electrons are found outside the nucleus, moving in orbitals around the nucleus.
      • Protons are found inside the nucleus of an atom.
      • Neutrons are also located inside the nucleus, alongside protons.
    • Symbol:

      • The symbol for electrons is e−e^-.
      • The symbol for protons is p+p^+.
      • The symbol for neutrons is n0n^0.
    • Relative Charge:

      • Electrons have a relative charge of −1-1.
      • Protons have a relative charge of +1+1.
      • Neutrons have a relative charge of 00 (neutral).
  2. 2

    Question 2

    What are the limitations of J.J. Thomson’s model of the atom?

    Medium
    3 marks
    Solve with AI
    Written solution
    Limitations of J.J. Thomson’s Model of the Atom

    J.J. Thomson’s model, often called the "Plum Pudding" or "Watermelon" model, proposed that an atom consists of a positively charged sphere with electrons embedded in it like seeds in a watermelon. While it was a groundbreaking step in proving atoms weren't indivisible, it had several critical limitations.


    1. Failure to Explain the Gold Foil Experiment

    The biggest limitation was that it could not explain the results of Ernest Rutherford’s alpha-particle scattering experiment.

    • Thomson's View: If the positive charge were spread out like a "pudding," alpha particles should pass through with very little deflection.
    • Reality: Rutherford found that some particles were deflected at large angles and some even bounced straight back, indicating a concentrated positive center (the nucleus).

    2. Lack of Experimental Evidence

    Thomson's model was largely theoretical and lacked a solid experimental foundation to support the specific distribution of positive and negative charges he proposed.


    3. Stability of the Atom

    The model failed to explain how the positive charge holds the electrons in place without them collapsing or how the atom remains stable. It did not account for the arrangement of electrons in specific energy levels or orbits.


    4. Failure to Explain Atomic Spectra

    It could not explain why elements emit light at specific wavelengths (atomic spectra) when heated. This was later explained by Bohr’s model, which introduced discrete energy shells.


  3. 3

    Question 3

    What are the limitations of Rutherford’s model of the atom?

    Medium
    3 marks
    Solve with AI
    Written solution
    Limitations of Rutherford’s Model of the Atom
    1. The Problem of Atomic Stability

    According to classical electromagnetic theory, any charged particle (like an electron) moving in a circular path undergoes acceleration.

    • Energy Loss: Accelerated charged particles must radiate energy continuously.
    • The Spiral Effect: As the revolving electron loses energy, its orbit would shrink, and it would move in a spiral path toward the nucleus.
    • Collapse: Ultimately, the electron should fall into the nucleus, making the atom highly unstable. In reality, atoms are exceptionally stable.

    2. Failure to Explain Atomic Spectra

    Rutherford’s model could not explain the origin of spectral lines.

    • If electrons lost energy continuously as Rutherford's model suggested, they should emit a continuous spectrum of light.
    • However, experimental data showed that atoms emit light at specific, discrete frequencies (line spectra).

    3. Distribution of Electrons

    The model was silent on the specific arrangement of electrons around the nucleus. It did not define:

    • The number of electrons in specific paths.
    • The energy associated with those paths.

  4. 4

    Question 4

    Describe Bohr’s model of the atom.

    Medium
    5 marks
    Solve with AI
    Written solution
    Bohr’s Model of the Atom

    In 1913, Neils Bohr proposed a model of the atom to overcome the limitations of Rutherford’s model. He introduced the concept of quantized energy levels to explain why atoms are stable and why they emit specific spectra.


    1. Main Postulates of Bohr's Model
    • Discrete Orbits: Electrons revolve around the nucleus only in certain special, non-radiating orbits called discrete orbits or energy levels.
    • Energy Radiation: While revolving in these discrete orbits, electrons do not radiate energy. This explains why the electron does not spiral into the nucleus.
    • Energy Shells: These orbits or shells are called energy levels. They are represented by the letters K, L, M, N... or the numbers n=1,2,3,4...n = 1, 2, 3, 4....
      • n=1n=1 is the K shell (closest to the nucleus, lowest energy).
      • n=2n=2 is the L shell, and so on.

    2. Energy Transitions

    According to Bohr, an electron can move from one energy level to another:

    • Absorption: An electron jumps to a higher energy level (excited state) by absorbing a specific amount of energy.
    • Emission: An electron falls back to a lower energy level by losing or emitting energy in the form of radiation (light).

    3. Distribution of Electrons (Bohr-Bury Scheme)

    Bohr, along with Bury, suggested rules for how electrons are distributed in these shells:

    1. Maximum Capacity: The maximum number of electrons in a shell is given by the formula 2n22n^2.
      • K shell (n=1n=1): 2(1)2=22(1)^2 = 2 electrons.
      • L shell (n=2n=2): 2(2)2=82(2)^2 = 8 electrons.
      • M shell (n=3n=3): 2(3)2=182(3)^2 = 18 electrons.
    2. Octet Rule: The outermost shell cannot hold more than 8 electrons, even if it has the capacity for more.
    3. Step-wise Filling: Electrons are not filled in a given shell unless the inner shells are filled (shells are filled in a step-wise manner).

  5. 5

    Question 5

    Compare all the proposed models of an atom given in this chapter.

    Medium
    5 marks
    Solve with AI
    Written solution
    Comparison of Proposed Models of the Atom 1. Plum Pudding Model (J.J. Thomson - 1904)
    • Structure: The atom is modeled as a positively charged "pudding" with negatively charged "plums" (electrons) embedded in it. The positive charge is spread uniformly throughout the atom, and the electrons are randomly scattered within it.
    • Main Idea: The electrons were thought to be embedded in a sphere of positive charge, similar to raisins in a plum pudding.
    • Key Points:
      • The positive charge is spread out evenly throughout the atom.
      • Electrons are scattered randomly within the positive charge.
      • This model does not explain the atom's stability or how the electrons are arranged.
    • Limitations:
      • It could not explain the results of Rutherford’s gold foil experiment, which suggested that the positive charge is concentrated in a small, dense nucleus.
      • It doesn't account for the atom's energy levels or the stability of the electrons.

    2. Rutherford Model (Ernest Rutherford - 1911)
    • Structure: The atom consists of a tiny, dense, positively charged nucleus at the center, with electrons orbiting around it at a distance. The nucleus contains most of the atom's mass, while the electrons are scattered around the nucleus.
    • Main Idea: Rutherford’s model was based on the results of the gold foil experiment, where alpha particles were deflected by a small, dense nucleus at the center of the atom.
    • Key Points:
      • The atom has a tiny, dense, positively charged nucleus.
      • Electrons move in orbits around the nucleus, but their exact paths are not defined.
      • Most of the atom’s volume is empty space.
    • Limitations:
      • It could not explain why electrons, which are charged particles, don’t spiral into the nucleus due to the electromagnetic force.
      • It did not explain atomic spectra or the discrete energy levels of electrons.

    3. Bohr Model (Niels Bohr - 1913)
    • Structure: The Bohr model builds upon Rutherford's model but introduces specific energy levels (or orbits) for electrons. Electrons move in fixed orbits around the nucleus, and each orbit corresponds to a specific energy level.
    • Main Idea: Bohr proposed that electrons occupy discrete orbits or energy levels, and they can jump between these levels by absorbing or emitting a fixed amount of energy (quanta). This model explains the discrete lines in atomic spectra.
    • Key Points:
      • Electrons move in fixed orbits around the nucleus.
      • Each orbit corresponds to a specific energy level.
      • Electrons can absorb or emit energy only when moving between these fixed orbits.
      • The energy of the electron is quantized.
    • Limitations:
      • The Bohr model works well for hydrogen but cannot explain more complex atoms (with more than one electron).
      • It also fails to explain the fine structure of atomic spectra and does not account for electron-electron interactions.
  6. 6

    Question 6

    Summarise the rules for writing the distribution of electrons in various shells for the first eighteen elements.

    Hard
    5 marks
    Solve with AI
    Written solution
    1. Maximum Capacity of a Shell (2n22n^2 Rule)

    The maximum number of electrons that can be accommodated in any shell is calculated using the formula 2n22n^2, where nn is the orbit number or energy level index.

    • K Shell (n=1n=1): 2×(1)2=22 \times (1)^2 = \mathbf{2} electrons
    • L Shell (n=2n=2): 2×(2)2=82 \times (2)^2 = \mathbf{8} electrons
    • M Shell (n=3n=3): 2×(3)2=182 \times (3)^2 = \mathbf{18} electrons

    2. The Octet Rule (Outermost Shell)

    Regardless of the shell's maximum capacity, the outermost shell of an atom cannot accommodate more than 8 electrons.

    • Note: For the K-shell (when it is the only shell, like in Helium), the maximum capacity remains 2.

    3. Step-wise Filling (Successive Filling)

    Electrons are not filled in a outer shell unless the inner shells are completely filled. This means shells are filled in a step-wise manner starting from the K-shell (lowest energy) and moving outward.


    Class 9 Chemistry Structure of the Atoms

  7. 7

    Question 7

    Define valency by taking examples of silicon and oxygen.

    Hard
    3 marks
    Solve with AI
    Written solution

    Valency is defined as the combining capacity of an atom. It is determined by the number of electrons an atom needs to gain, lose, or share to achieve a stable, completely filled outermost shell (usually an octet of 8 electrons, or a duplet of 2 for the K-shell).

    The electrons present in the outermost shell are called valence electrons.


    Example 1: Silicon (Si)
    • Atomic Number: 14
    • Electronic Configuration: 2, 8, 4 (K=2, L=8, M=4)
    • Valence Electrons: 4
    • Valency Calculation: Silicon has 4 electrons in its outermost M-shell. To achieve a stable octet (8 electrons), it needs to share 4 electrons with other atoms.
    • Valency of Silicon = 4

    Example 2: Oxygen (O)
    • Atomic Number: 8
    • Electronic Configuration: 2, 6 (K=2, L=6)
    • Valence Electrons: 6
    • Valency Calculation: Oxygen has 6 electrons in its outermost L-shell. Instead of losing 6 electrons (which requires too much energy), it is easier for oxygen to gain 2 electrons to complete its octet (8−6=28 - 6 = 2).
    • Valency of Oxygen = 2

  8. 8

    Question 8

    Explain with examples:
    (i) Atomic number
    (ii) Mass number
    (iii) Isotopes
    (iv) Isobars
    Give any two uses of isotopes.

    Medium
    5 marks
    Solve with AI
    Written solution
    (ii) Mass Number (AA)

    The Mass Number is the sum of the total number of protons and neutrons present in the nucleus of an atom. These particles are collectively called nucleons.

    • Formula: A=Protons+NeutronsA = \text{Protons} + \text{Neutrons}
    • Example: An Aluminum atom has 13 protons and 14 neutrons. Its mass number (AA) is 13+14=2713 + 14 = \mathbf{27}.

    (iii) Isotopes

    Isotopes are atoms of the same element that have the same atomic number but different mass numbers. This happens because they have the same number of protons but a different number of neutrons.

    • Example: Hydrogen has three isotopes:
      1. Protium (11H^1_1H): 1 proton, 0 neutrons.
      2. Deuterium (12H^2_1H): 1 proton, 1 neutron.
      3. Tritium (13H^3_1H): 1 proton, 2 neutrons.

    (iv) Isobars

    Isobars are atoms of different elements that have the same mass number but different atomic numbers. They have different chemical properties because their atomic numbers are different.

    • Example: Calcium (atomic number 20) and Argon (atomic number 18). Both have a mass number of 40.
      • 2040Ca^{40}_{20}Ca and 1840Ar^{40}_{18}Ar are isobars.

    Two Uses of Isotopes

    Isotopes have vital applications in various fields:

    1. Medicine: An isotope of Cobalt (Cobalt-60) is used in the treatment of cancer. Similarly, an isotope of Iodine (Iodine-131) is used in the treatment of goitre.
    2. Energy: An isotope of Uranium (Uranium-235) is used as a fuel in nuclear reactors to generate electricity.
  9. 9

    Question 9

    Na+Na^+ has completely filled K and L shells. Explain.

    Medium
    3 marks
    Solve with AI
    Written solution

    1. Electronic Configuration of Neutral Sodium (NaNa)
    • Atomic Number: 11
    • Distribution: Following the 2n22n^2 rule, the electrons are distributed as:
    • Configuration: 2, 8, 1

    2. Formation of Sodium Ion (Na+Na^+)

    Sodium is a metal and aims to achieve a stable octet (8 electrons in the outermost shell) to become stable like a noble gas (Neon).

    • To achieve this, it is easier for sodium to lose the 1 electron from its M shell than to gain 7 electrons.
    • When it loses that 1 negative electron, it is left with 11 protons but only 10 electrons, resulting in a +1+1 charge.

    3. Explaining the Filled Shells

    After losing the electron from the M shell:

    • New Total Electrons: 10
    • New Distribution:
    • K shell: 2 electrons
    • L shell: 8 electrons
    • New Configuration: 2, 8

    Conclusion:

    Since the K shell can hold a maximum of 2 electrons and the L shell can hold a maximum of 8, both shells in Na+Na^+ are completely filled. This gives the sodium ion the stable electronic configuration of the noble gas Neon.


  10. 10

    Question 10

    If bromine atom is available in the form of two isotopes:
    3579Br\mathbf{^{79}_{35}Br} (49.7%) and 3581Br\mathbf{^{81}_{35}Br} (50.3%),
    Calculate the average atomic mass of bromine atom.

    Medium
    3 marks
    Solve with AI
    Written solution
    1. Given Data
    • Isotope 1: 3579Br^{79}_{35}Br
      • Mass = 79 u79 \, \text{u}
      • Abundance = 49.7%49.7\%
    • Isotope 2: 3581Br^{81}_{35}Br
      • Mass = 81 u81 \, \text{u}
      • Abundance = 50.3%50.3\%

    2. Formula

    The average atomic mass is calculated as:

    Average Atomic Mass=(Mass of Isotope 1×% Abundance100)+(Mass of Isotope 2×% Abundance100)\text{Average Atomic Mass} = \left( \frac{\text{Mass of Isotope 1} \times \% \text{ Abundance}}{100} \right) + \left( \frac{\text{Mass of Isotope 2} \times \% \text{ Abundance}}{100} \right)


    3. Calculation

    Substituting the values into the formula:

    Average Atomic Mass=(79×49.7100)+(81×50.3100)\text{Average Atomic Mass} = \left( 79 \times \frac{49.7}{100} \right) + \left( 81 \times \frac{50.3}{100} \right)

    Average Atomic Mass=(3926.3100)+(4074.3100)\text{Average Atomic Mass} = \left( \frac{3926.3}{100} \right) + \left( \frac{4074.3}{100} \right)

    Average Atomic Mass=39.263+40.743\text{Average Atomic Mass} = 39.263 + 40.743

    Average Atomic Mass=80.006 u\text{Average Atomic Mass} = \mathbf{80.006 \, \text{u}}

  11. 11

    Question 11

    The average atomic mass of a sample of an element X is 16.2 u.
    What are the percentages of isotopes 816X\mathbf{^{16}_{8}X} and 818X\mathbf{^{18}_{8}X} in the sample?

    Medium
    4 marks
    Solve with AI
    Written solution
    1. Given Data
    • Average atomic mass of element X=16.2 uX = 16.2 \text{ u}
    • Mass of Isotope 1 (816X^{16}_{8}X) =16 u= 16 \text{ u}
    • Mass of Isotope 2 (818X^{18}_{8}X) =18 u= 18 \text{ u}

    2. Assumption

    Let the percentage of isotope 816X^{16}_{8}X be a%a\%.

    Then, the percentage of isotope 818X^{18}_{8}X will be (100−a)%(100 - a)\%.


    3. Formula and Substitution

    The average atomic mass is given by:

    Average Atomic Mass=(Mass of Isotope 1×%)+(Mass of Isotope 2×%)100\text{Average Atomic Mass} = \frac{(\text{Mass of Isotope 1} \times \%) + (\text{Mass of Isotope 2} \times \%)}{100}

    Substituting the values:

    16.2=(16×a)+(18×(100−a))10016.2 = \frac{(16 \times a) + (18 \times (100 - a))}{100}


    4. Solving the Equation
    1. Multiply by 100:

    1620=16a+1800−18a1620 = 16a + 1800 - 18a

    1. Combine like terms (16a−18a16a - 18a):

    1620=1800−2a1620 = 1800 - 2a

    1. Rearrange to solve for 2a2a:

    2a=1800−16202a = 1800 - 1620

    2a=1802a = 180

    1. Find aa:

    a=1802=90a = \frac{180}{2} = 90


    5. Final Result
    • Percentage of isotope 816X^{16}_{8}X =a=90%= a = \mathbf{90\%}
    • Percentage of isotope 818X^{18}_{8}X =(100−90)=10%= (100 - 90) = \mathbf{10\%}

  12. 12

    Question 12

    If Z=3Z = 3, what would be the valency of the element? Also, name the element.

    Easy
    2 marks
    Solve with AI
    Written solution

    1. Identification of the Element
    • Atomic Number (ZZ): 3
    • The element with atomic number 3 is Lithium.
    • Symbol: LiLi

    2. Electronic Configuration
    • K shell: 2 electrons (Full)
    • L shell: 1 electron (Remaining)
    • Distribution: 2, 1

    3. Calculation of Valency

    Valency is the combining capacity of an atom. Lithium has 1 valence electron in its outermost shell (L shell).

    • To achieve a stable state (a full K shell/duplet), it is much easier for Lithium to lose 1 electron than to gain 7 electrons.
    • Therefore, the number of electrons it can lose to become stable is 1.

    Valency of Lithium = 1


  13. 13

    Question 13

    The composition of the nuclei of two atomic species X and Y is given as:
    Class 9 Chemistry Structure of the Atoms

    Give the mass numbers of X and Y. What is the relation between the two species?

    Medium
    3 marks
    Solve with AI
    Written solution
    1. Calculation of Mass Numbers

    The Mass Number (AA) is the sum of protons and neutrons in the nucleus (A=p+nA = p + n).

    • Mass Number of X: 6(protons)+6(neutrons)=126 (\text{protons}) + 6 (\text{neutrons}) = \mathbf{12}
    • Mass Number of Y: 6(protons)+8(neutrons)=146 (\text{protons}) + 8 (\text{neutrons}) = \mathbf{14}

    2. Relationship Between X and Y

    To determine the relationship, we look at their atomic numbers and mass numbers:

    • Atomic Number (ZZ): Both X and Y have 6 protons, so their atomic number is the same (Z=6Z = 6).
    • Mass Number (AA): They have different mass numbers (12 and 14).

    Relationship: Since they have the same atomic number but different mass numbers, X and Y are Isotopes.


    3. Identification of the Element

    The element with atomic number 6 is Carbon (CC).

    • Species X is Carbon-12 (612C^{12}_{6}C).
    • Species Y is Carbon-14 (614C^{14}_{6}C).
  14. 14

    Question 14

    For the following statements, write T for True and F for False.
    (a) J.J. Thomson proposed that the nucleus of an atom contains only nucleons.
    (b) A neutron is formed by an electron and a proton combining together. Therefore, it is neutral.
    (c) The mass of an electron is about 12000\frac{1}{2000} times that of a proton.
    (d) An isotope of iodine is used for making tincture iodine, which is used as a medicine.

    Medium
    4 marks
    Solve with AI
    Written solution

    (a) J.J. Thomson proposed that the nucleus of an atom contains only nucleons. - F

    • J.J. Thomson proposed the plum pudding model, where the atom consists of a uniform positive charge with electrons embedded in it. The concept of the nucleus containing nucleons (protons and neutrons) was proposed later by Rutherford.

    (b) A neutron is formed by an electron and a proton combining together. Therefore, it is neutral. - F

    • A neutron is not formed by the combination of an electron and a proton. It is a subatomic particle found in the nucleus of an atom, composed of quarks. It is neutral because its internal charges cancel out, but it is not the result of a proton and electron combining.

    (c) The mass of an electron is about 12000\frac{1}{2000} times that of a proton. - T

    • The mass of an electron is approximately 1/1836 times the mass of a proton, which is very close to the value of 1/2000. Thus, this statement is True.

    (d) An isotope of iodine is used for making tincture iodine, which is used as a medicine. - T

    • Iodine-131 (an isotope of iodine) is used in medical applications, including in the form of tincture iodine, which is used as an antiseptic.
  15. 15

    Question 15

    Rutherford’s alpha-particle scattering experiment was responsible for the discovery of:

    MCQMedium
    1 mark
    Solve with AI
    Answer
    • (A) Atomic Nucleus

      Correct
    • (B) Electron

    • (C) Proton

    • (D) Neutron

    The correct answer is (a) Atomic Nucleus.

    In 1911, Ernest Rutherford performed his famous gold foil experiment, which fundamentally changed our understanding of the atom.

    • The Experiment: He bombarded a very thin gold foil with high-energy alpha particles (positively charged helium nuclei).
    • The Observation: While most particles passed straight through, some were deflected at small angles, and a very small fraction (11 in 12,00012,000) rebounded completely.
    • The Conclusion: Rutherford concluded that the positive charge and nearly all the mass of the atom are not spread out (as Thomson thought) but are concentrated in an incredibly small, dense center. He named this center the nucleus.

    Why the other options are incorrect:
    • (b) Electron: Discovered by J.J. Thomson in 1897 using cathode ray tube experiments.
    • (c) Proton: Its presence was indicated by E. Goldstein in 1886 (canal rays), though Rutherford later identified it as a particle within the nucleus.
    • (d) Neutron: Discovered much later in 1932 by James Chadwick.

  16. 16

    Question 16

    Isotopes of an element have:

    MCQMedium
    1 mark
    Solve with AI
    Answer
    • (A) The same physical properties

    • (B) Different chemical properties

    • (C) Different number of neutrons

      Correct
    • (D) Different atomic numbers

    The correct answer is (c) Different number of neutrons.

    Isotopes are defined as atoms of the same element that have the same atomic number but different mass numbers. This occurs because of the composition of their nuclei.

    • Atomic Number (ZZ): This represents the number of protons. Since isotopes belong to the same element, they must have the same atomic number.
    • Mass Number (AA): This is the sum of protons and neutrons. Since the proton count is the same but the mass is different, it means they have a different number of neutrons.
  17. 17

    Question 17

    The number of valence electrons in Cl−Cl^- ion is:

    MCQMedium
    1 mark
    Solve with AI
    Answer
    • (A) 16

    • (B) 8

      Correct
    • (C) 17

    • (D) 18

    The correct answer is (b) 8.

    To find the number of valence electrons in the chloride ion (Cl−Cl^-), we look at how a neutral chlorine atom changes when it becomes an ion.

    1. Neutral Chlorine Atom (ClCl):

      • Atomic Number: 17
      • Electronic Configuration: 2, 8, 7
      • Valence Electrons: 7
    2. Formation of Chloride Ion (Cl−Cl^-):

      • Chlorine is a non-metal that needs one more electron to complete its octet (achieve 8 electrons in the outermost shell).
      • By gaining 1 electron, it becomes the negatively charged Cl−Cl^- ion.
    3. Electronic Configuration of Cl−Cl^-:

      • New Total Electrons: 17+1=1817 + 1 = 18
      • Distribution: 2, 8, 8
      • The outermost shell (M shell) now has 8 electrons.
  18. 18

    Question 18

    Which one of the following is a correct electronic configuration of sodium?

    MCQMedium
    2 marks
    Solve with AI
    Answer
    • (A) 2,8

    • (B) 8,2,1

    • (C) 2,1,8

    • (D) 2,8,1

      Correct

    The correct electronic configuration of sodium is (d) 2, 8, 1.

    To determine the configuration, we follow these steps:

    1. Find the Atomic Number: The atomic number (ZZ) of Sodium (NaNa) is 11. This means a neutral sodium atom has 11 electrons.
    2. Fill the Shells (Bohr-Bury Rules):
      • K Shell: Can hold a maximum of 2 electrons. (11−2=911 - 2 = 9 left).
      • L Shell: Can hold a maximum of 8 electrons. (9−8=19 - 8 = 1 left).
      • M Shell: The remaining 1 electron goes here.
    3. Result: The distribution is 2, 8, 1.
  19. 19

    Question 19

    Complete the following table.

    Class 9 Chemistry Structure of the Atoms

    Hard
    5 marks
    Solve with AI
    Written solution
    Completed Atomic Species Table

    To complete this table, we use the fundamental relationships of atomic structure:

    1. Atomic Number (ZZ) = Number of Protons = Number of Electrons (in a neutral atom).
    2. Mass Number (AA) = Number of Protons + Number of Neutrons.
    3. Number of Neutrons = Mass Number (AA) - Atomic Number (ZZ).

    Class 9 Chemistry Structure of the Atoms


    Explanation of Specific Rows
    • Row 1: Since Atomic Number is 9, Protons and Electrons are also 9. Neutrons = 19−9=1019 - 9 = 10. Element 9 is Fluorine.
    • Row 2: For Atomic Number 16, Protons and Electrons are 16. Neutrons = 32−16=1632 - 16 = 16. Element 16 is Sulphur.
    • Row 3: Protons are 12, so Atomic Number is 12. Neutrons = 24−12=1224 - 12 = 12. Element 12 is Magnesium.
    • Row 4: Protons are 1, so Atomic Number is 1. Since Mass Number is 2, it is the isotope of Hydrogen called Deuterium.
    • Row 5: Protons are 1 and Neutrons are 0, so Mass Number is 1. Since Electrons are 0, it is a positively charged ion (H+H^+) of the isotope Protium.
Inside Ch 4

What Class 9 Chemistry Ch 4 covers

The sections of the chapter, in the order the book takes them. Every question above comes from one of these.

  1. 01The Charged Particles In Matter
  2. 02Structure Of An Atom
  3. 03Electronic Configuration And Valency
  4. 04Atomic Number And Mass Number

More ways to study this chapter

The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 4 before.

Common questions

Class 9 Chemistry Ch 4 questions students ask

How many questions are there in Class 9 Chemistry Ch 4?

19 questions. Every one is solved step by step on this page.

Are these Class 9 Chemistry question answers free?

Yes. Every question and its full working is free to read, with no account needed.

Can I download the Class 9 Chemistry Ch 4 solutions as a PDF?

There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.