Break the tube into straight rectangular pieces of width 1 that do not overlap at the corners (see the figure). At each corner the 1 by 1 square already belongs to the previous piece, so every piece after the first is 1 shorter than the outer measurement marked beside it.
| Piece | Length | Area |
|---|
| top | 20 | 20 |
| right side | 19 | 19 |
| bottom | 19 | 19 |
| left side | 14 | 14 |
| second top | 14 | 14 |
| second right side | 9 | 9 |
| second bottom | 9 | 9 |
| inner left side | 4 | 4 |
| inner top | 4 | 4 |
Area=20+19+19+14+14+9+9+4+4=112 square units

The bent tube in the hint: its two arms are marked 5 and 5 on the outside. The corner square of side 1 belongs to both arms, so it must be counted only once:
Area of bent tube=5×1+4×1=9 square units
A straight tube of width 1 with the same area must have length 9 units (not 10).
The spiral works the same way: straightened out, it is a tube of width 1 and length 112. So the area of the spiral tube is 112 square units.