Confirming your payment

Skip to content

Opening your dashboard

Class 12 Chemistry Chapter 1: Solutions

53 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.

AI Tutor

Get talked through Ch 1, not just shown the answer

Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.

  • Ask it out loud, in your own words
  • It gives you the next step, not the answer
  • Stuck on part (ii)? Start there
Ch 1 solutions

53 questions with solutions

1–5 marks · Mixed difficulty

The first 35 solutions are on this page. This chapter is a long one, so the rest open on their own page to keep this one quick to load.

  1. 1

    Question 1

    Define the term solution. How many types of solutions are formed? Write briefly about each type with an example.

    Easy
    5 marks
    Solve with AI
    Written solution

    A solution is a homogeneous mixture of two or more components. "Homogeneous" means its composition and properties are the same throughout — every drop of salt water is equally salty.

    • The component present in the largest amount is the solvent. It decides the physical state (solid, liquid or gas) of the solution.
    • Every other component is a solute.

    A binary solution has just two components (one solute + one solvent). Since each of them can be a solid, a liquid or a gas, there are 3×3=93 \times 3 = 9 types of binary solutions. They are grouped by the state of the solvent:

    Class 12 Chemistry Solutions

    Type of solutionSoluteSolventExample
    Gaseous solutionsGasGasMixture of oxygen and nitrogen gases (air)
    LiquidGasChloroform mixed with nitrogen gas
    SolidGasCamphor in nitrogen gas
    Liquid solutionsGasLiquidOxygen dissolved in water
    LiquidLiquidEthanol dissolved in water
    SolidLiquidGlucose dissolved in water
    Solid solutionsGasSolidSolution of hydrogen in palladium
    LiquidSolidAmalgam of mercury with sodium
    SolidSolidCopper dissolved in gold

    Briefly, about each group:

    1. Gaseous solutions — the solvent is a gas. Gases mix completely in all proportions, so any gas mixture is a solution.
    2. Liquid solutions — the solvent is a liquid. These are the most common and most important solutions in the laboratory (acids, salt solutions, soft drinks).
    3. Solid solutions — the solvent is a solid. Alloys such as gold–copper and the absorption of hydrogen by palladium are examples.
  2. 2

    Question 2

    Give an example of a solid solution in which the solute is a gas.

    Easy
    1 mark
    Solve with AI
    Written solution

    Solution of hydrogen in palladium.

    • Solute: hydrogen gas (H2\text{H}_2)
    • Solvent: palladium (a solid metal)

    Palladium can absorb a very large volume of hydrogen gas. The small hydrogen atoms fit into the empty spaces (interstitial sites) between the palladium atoms of the metal lattice. The mixture stays a uniform solid, so it is a gas-in-solid solution.

    Class 12 Chemistry Solutions

  3. 3

    Question 3

    Define the following terms:

    (i) Mole fraction
    (ii) Molality
    (iii) Molarity
    (iv) Mass percentage

    Easy
    4 marks
    Solve with AI
    Written solution

    Consider a binary solution of solvent (1) and solute (2), with masses w1w_1, w2w_2 (in grams), molar masses M1M_1, M2M_2 and moles n1n_1, n2n_2.

    (i) Mole fraction (xx) — the number of moles of one component divided by the total number of moles of all the components.

    x2=n2n1+n2,x1=n1n1+n2,x1+x2=1x_2 = \frac{n_2}{n_1 + n_2}, \qquad x_1 = \frac{n_1}{n_1 + n_2}, \qquad x_1 + x_2 = 1

    It is a pure number (no unit) and does not change with temperature.

    (ii) Molality (mm) — the number of moles of solute dissolved in 1 kg of solvent.

    m=n2mass of solvent in kg=w2×1000M2×w1(unit: mol kg−1)m = \frac{n_2}{\text{mass of solvent in kg}} = \frac{w_2 \times 1000}{M_2 \times w_1} \quad (\text{unit: mol kg}^{-1})

    It depends only on masses, so it does not change with temperature.

    (iii) Molarity (MM) — the number of moles of solute dissolved in 1 litre of solution.

    M=n2volume of solution in L=w2×1000M2×VmL(unit: mol L−1)M = \frac{n_2}{\text{volume of solution in L}} = \frac{w_2 \times 1000}{M_2 \times V_{\text{mL}}} \quad (\text{unit: mol L}^{-1})

    The volume of a solution expands on heating, so molarity decreases as temperature rises.

    (iv) Mass percentage (w/w) — the mass of a component in 100 g of the solution.

    Mass % of solute=w2w1+w2×100\text{Mass \% of solute} = \frac{w_2}{w_1 + w_2} \times 100

    It depends only on masses, so it is also independent of temperature.

    Class 12 Chemistry Solutions

    TermBased onUnitChanges with temperature?
    Mole fractionmoles / total molesnoneNo
    Molalitymoles / kg of solventmol kg⁻¹No
    Molaritymoles / L of solutionmol L⁻¹Yes
    Mass percentagemass / mass of solution%No
  4. 4

    Question 4

    Concentrated nitric acid used in laboratory work is 68% nitric acid by mass in aqueous solution. What should be the molarity of such a sample of the acid if the density of the solution is 1.504 g mL−1^{-1}?

    Medium
    3 marks
    Solve with AI
    Written solution

    Given: 68% HNO3\text{HNO}_3 by mass, density of solution =1.504 g mL−1= 1.504\ \text{g mL}^{-1}, molar mass of HNO3=1+14+48=63 g mol−1\text{HNO}_3 = 1 + 14 + 48 = 63\ \text{g mol}^{-1}.

    Idea: Molarity needs moles of solute and volume of solution. Take a convenient sample — 100 g of solution — and find both.

    Class 12 Chemistry Solutions

    Step 1 — moles of HNO3\text{HNO}_3 in 100 g of solution

    100 g of solution contains 68 g of HNO3\text{HNO}_3:

    n=6863=1.079 moln = \frac{68}{63} = 1.079\ \text{mol}

    Step 2 — volume of 100 g of solution

    V=massdensity=100 g1.504 g mL−1=66.49 mL=0.06649 LV = \frac{\text{mass}}{\text{density}} = \frac{100\ \text{g}}{1.504\ \text{g mL}^{-1}} = 66.49\ \text{mL} = 0.06649\ \text{L}

    Step 3 — molarity

    M=1.0790.06649=16.23 mol L−1M = \frac{1.079}{0.06649} = 16.23\ \text{mol L}^{-1}

    Answer: The molarity of the concentrated nitric acid is 16.23 M.

  5. 5

    Question 5

    A solution of glucose in water is labelled as 10% w/w, what would be the molality and mole fraction of each component in the solution? If the density of the solution is 1.2 g mL−1^{-1}, then what shall be the molarity of the solution?

    Medium
    5 marks
    Solve with AI
    Written solution

    Given: 10% w/w glucose, density =1.2 g mL−1= 1.2\ \text{g mL}^{-1}; M(glucose)=180 g mol−1M(\text{glucose}) = 180\ \text{g mol}^{-1}, M(water)=18 g mol−1M(\text{water}) = 18\ \text{g mol}^{-1}.

    Take 100 g of solution: glucose =10= 10 g, water =90= 90 g.

    Class 12 Chemistry Solutions

    Moles of each component

    nglucose=10180=0.0556 mol,nwater=9018=5.00 moln_{\text{glucose}} = \frac{10}{180} = 0.0556\ \text{mol}, \qquad n_{\text{water}} = \frac{90}{18} = 5.00\ \text{mol}

    (a) Molality

    m=0.0556 mol0.090 kg=0.617 mol kg−1m = \frac{0.0556\ \text{mol}}{0.090\ \text{kg}} = 0.617\ \text{mol kg}^{-1}

    (b) Mole fractions

    xglucose=0.05560.0556+5.00=0.011,xwater=1−0.011=0.989x_{\text{glucose}} = \frac{0.0556}{0.0556 + 5.00} = 0.011, \qquad x_{\text{water}} = 1 - 0.011 = 0.989

    (c) Molarity — the volume of 100 g of solution is

    V=1001.2=83.33 mL=0.08333 LV = \frac{100}{1.2} = 83.33\ \text{mL} = 0.08333\ \text{L}

    M=0.05560.08333=0.667 mol L−1≈0.67 MM = \frac{0.0556}{0.08333} = 0.667\ \text{mol L}^{-1} \approx 0.67\ \text{M}

    Answer: molality =0.617 m= 0.617\ \text{m}; xglucose=0.011x_{\text{glucose}} = 0.011, xwater=0.989x_{\text{water}} = 0.989; molarity =0.67 M= 0.67\ \text{M}.

  6. 6

    Question 6

    How many mL of 0.1 M HCl are required to react completely with 1 g mixture of Na2CO3Na_2CO_3 and NaHCO3NaHCO_3 containing equimolar amounts of both?

    Hard
    4 marks
    Solve with AI
    Written solution

    Given: 1 g mixture of Na2CO3\text{Na}_2\text{CO}_3 and NaHCO3\text{NaHCO}_3 with equal numbers of moles; HCl is 0.1 M.

    Molar masses: Na2CO3=106 g mol−1\text{Na}_2\text{CO}_3 = 106\ \text{g mol}^{-1}, NaHCO3=84 g mol−1\text{NaHCO}_3 = 84\ \text{g mol}^{-1}.

    Step 1 — reactions with HCl

    Na2CO3+2HCl→2NaCl+H2O+CO2\text{Na}_2\text{CO}_3 + 2\text{HCl} \rightarrow 2\text{NaCl} + \text{H}_2\text{O} + \text{CO}_2

    NaHCO3+HCl→NaCl+H2O+CO2\text{NaHCO}_3 + \text{HCl} \rightarrow \text{NaCl} + \text{H}_2\text{O} + \text{CO}_2

    So each mole of Na2CO3\text{Na}_2\text{CO}_3 needs 2 mol HCl and each mole of NaHCO3\text{NaHCO}_3 needs 1 mol HCl.

    Step 2 — moles of each salt

    Let there be xx mol of each. Then

    106x+84x=1⇒x=1190=5.26×10−3 mol106x + 84x = 1 \quad\Rightarrow\quad x = \frac{1}{190} = 5.26 \times 10^{-3}\ \text{mol}

    Step 3 — total HCl needed

    nHCl=2x+x=3x=3×5.26×10−3=1.579×10−2 moln_{\text{HCl}} = 2x + x = 3x = 3 \times 5.26 \times 10^{-3} = 1.579 \times 10^{-2}\ \text{mol}

    Class 12 Chemistry Solutions

    Step 4 — volume of 0.1 M HCl

    V=nM=1.579×10−20.1=0.1579 L=157.9 mLV = \frac{n}{M} = \frac{1.579 \times 10^{-2}}{0.1} = 0.1579\ \text{L} = 157.9\ \text{mL}

    Answer: about 157.9 mL of 0.1 M HCl is required.

  7. 7

    Question 7

    A solution is obtained by mixing 300 g of 25% solution and 400 g of 40% solution by mass. Calculate the mass percentage of the resulting solution.

    Easy
    2 marks
    Solve with AI
    Written solution

    Idea: When two solutions of the same solute are mixed, the masses of solute add and the masses of solution add.

    Class 12 Chemistry Solutions

    Solute in each solution

    First: 25100×300=75 g,Second: 40100×400=160 g\text{First: } \frac{25}{100} \times 300 = 75\ \text{g}, \qquad \text{Second: } \frac{40}{100} \times 400 = 160\ \text{g}

    Totals after mixing

    Solute=75+160=235 g,Solution=300+400=700 g\text{Solute} = 75 + 160 = 235\ \text{g}, \qquad \text{Solution} = 300 + 400 = 700\ \text{g}

    Mass percentage of the mixture

    235700×100=33.57%\frac{235}{700} \times 100 = 33.57\%

    The solvent (water) in the mixture is 700−235=465700 - 235 = 465 g, i.e. 66.43%66.43\%.

    Answer: The resulting solution is 33.57% solute by mass. (Check: it lies between 25% and 40%, closer to 40% because more of the 40% solution was used.)

  8. 8

    Question 8

    An antifreeze solution is prepared from 222.6 g of ethylene glycol (C2H6O2C_2H_6O_2) and 200 g of water. Calculate the molality of the solution. If the density of the solution is 1.072 g mL−1^{-1}, then what shall be the molarity of the solution?

    Hard
    4 marks
    Solve with AI
    Written solution

    Given: ethylene glycol (C2H6O2\text{C}_2\text{H}_6\text{O}_2) =222.6= 222.6 g, water =200= 200 g, density of solution =1.072 g mL−1= 1.072\ \text{g mL}^{-1}.

    Molar mass of ethylene glycol =2(12)+6(1)+2(16)=62 g mol−1= 2(12) + 6(1) + 2(16) = 62\ \text{g mol}^{-1}.

    Step 1 — moles of ethylene glycol

    n=222.662=3.590 moln = \frac{222.6}{62} = 3.590\ \text{mol}

    Step 2 — molality (per kg of water)

    m=3.5900.200=17.95 mol kg−1m = \frac{3.590}{0.200} = 17.95\ \text{mol kg}^{-1}

    Step 3 — volume of the solution

    Mass of solution =222.6+200=422.6= 222.6 + 200 = 422.6 g

    V=422.6 g1.072 g mL−1=394.2 mL=0.3942 LV = \frac{422.6\ \text{g}}{1.072\ \text{g mL}^{-1}} = 394.2\ \text{mL} = 0.3942\ \text{L}

    Step 4 — molarity (per litre of solution)

    M=3.5900.3942=9.11 mol L−1M = \frac{3.590}{0.3942} = 9.11\ \text{mol L}^{-1}

    Class 12 Chemistry Solutions

    Answer: molality =17.95 m= 17.95\ \text{m}; molarity =9.11 M= 9.11\ \text{M}. Molarity is smaller because it is divided by the whole solution volume (394 mL), which is larger than the mass of water alone would suggest.

  9. 9

    Question 9

    A sample of drinking water was found to be severely contaminated with chloroform (CHCl3CHCl_3) supposed to be a carcinogen. The level of contamination was 15 ppm (by mass):

    (i) express this in percent by mass
    (ii) determine the molality of chloroform in the water sample.

    Hard
    4 marks
    Solve with AI
    Written solution

    (i) Percent by mass

    15 ppm by mass means 15 g of chloroform in 10610^6 g of solution.

    Mass %=15106×100=1.5×10−3 %  (=0.0015%)\text{Mass \%} = \frac{15}{10^6} \times 100 = 1.5 \times 10^{-3}\ \% \;(= 0.0015\%)

    (ii) Molality

    Molar mass of CHCl3=12+1+3(35.5)=119.5 g mol−1\text{CHCl}_3 = 12 + 1 + 3(35.5) = 119.5\ \text{g mol}^{-1}.

    In 10610^6 g of solution there are 15 g of CHCl3\text{CHCl}_3, so the water is 106−15≈10610^6 - 15 \approx 10^6 g =1000= 1000 kg (the solute is so little that the solvent mass is practically the whole mass).

    nCHCl3=15119.5=0.1255 moln_{\text{CHCl}_3} = \frac{15}{119.5} = 0.1255\ \text{mol}

    m=0.1255 mol1000 kg=1.255×10−4 mol kg−1m = \frac{0.1255\ \text{mol}}{1000\ \text{kg}} = 1.255 \times 10^{-4}\ \text{mol kg}^{-1}

    Class 12 Chemistry Solutions

    Answer: (i) 1.5×10−3%1.5 \times 10^{-3}\% by mass; (ii) molality ≈1.26×10−4 m\approx 1.26 \times 10^{-4}\ \text{m}.

  10. 10

    Question 10

    What role does the molecular interaction play in a solution of alcohol and water?

    Medium
    3 marks
    Solve with AI
    Written solution

    Both alcohol (say ethanol, C2H5OH\text{C}_2\text{H}_5\text{OH}) and water contain −OH-\text{OH} groups, so in the pure liquids the molecules are held together by hydrogen bonds.

    When alcohol is added to water, alcohol molecules get in between the water molecules. Some of the original water–water and alcohol–alcohol hydrogen bonds are broken, and the new alcohol–water hydrogen bonds that form are weaker on the whole.

    Class 12 Chemistry Solutions

    Consequences of these weaker interactions:

    1. Molecules escape more easily from the solution, so its vapour pressure is higher than Raoult's law predicts — the solution shows positive deviation from Raoult's law.
    2. Because the vapour pressure is higher, the mixture boils at a lower temperature than expected. With a large positive deviation, ethanol and water form a minimum-boiling azeotrope (about 95% ethanol by volume), which is why ethanol cannot be made 100% pure by fractional distillation.

    In short: the molecular interaction between alcohol and water is weaker than the interactions in the pure liquids, which makes the solution non-ideal with positive deviation.

  11. 11

    Question 11

    Why do gases always tend to be less soluble in liquids as the temperature is raised?

    Easy
    2 marks
    Solve with AI
    Written solution

    When a gas dissolves, its fast-moving molecules are captured into the liquid and settle among the solvent molecules. This is similar to condensation, so heat is given out:

    Gas+Solvent  ⇌  Solution,ΔsolH<0 (exothermic)\text{Gas} + \text{Solvent} \;\rightleftharpoons\; \text{Solution}, \qquad \Delta_{\text{sol}}H < 0\ (\text{exothermic})

    Le Chatelier's principle: raising the temperature favours the endothermic (backward) direction. So on heating, the equilibrium shifts to the left — gas comes out of the solution — and the solubility falls.

    In terms of Henry's law (p=KH xp = K_H\,x), KHK_H increases with temperature, so at the same pressure the mole fraction xx of dissolved gas becomes smaller.

    Class 12 Chemistry Solutions

    Everyday evidence:

    • Bubbles appear in water long before it boils — dissolved air is coming out.
    • A cold soft drink stays fizzy longer than a warm one.
    • Aquatic animals are more comfortable in cold water, which holds more dissolved oxygen.
  12. 12

    Question 12

    State Henry’s law and mention some important applications?

    Easy
    2 marks
    Solve with AI
    Written solution

    Henry's law: At a constant temperature, the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid.

    In the form used most often, the partial pressure of the gas in the vapour phase (pp) is proportional to its mole fraction (xx) in the solution:

    p=KH xp = K_H\,x

    where KHK_H is Henry's law constant. KHK_H depends on the gas and the temperature. The larger KHK_H is, the less soluble the gas.

    Class 12 Chemistry Solutions

    Important applications:

    1. Soft drinks and soda water — bottles are sealed under high pressure of CO2\text{CO}_2 to dissolve more of it. When opened, the pressure drops and the extra gas escapes as fizz.
    2. Scuba diving (the bends) — deep under water the diver breathes air at high pressure, so more nitrogen dissolves in the blood. If the diver rises too fast, the pressure falls suddenly and nitrogen comes out as bubbles that block capillaries. This painful and dangerous condition is called the bends. To avoid it, the air in scuba tanks is diluted with helium (11.7% He, 56.2% N2\text{N}_2, 32.1% O2\text{O}_2).
    3. High altitudes (anoxia) — the partial pressure of oxygen is lower at high altitudes, so less oxygen dissolves in blood and tissues. Climbers become weak and cannot think clearly — a condition called anoxia.
  13. 13

    Question 13

    The partial pressure of ethane over a solution containing 6.56×10−36.56 \times 10^{-3} g of ethane is 1 bar. If the solution contains 5.00×10−25.00 \times 10^{-2} g of ethane, then what shall be thepartial pressure of the gas?

    Medium
    2 marks
    Solve with AI
    Written solution

    Law used: Henry's law — the partial pressure of a gas is proportional to the amount of it dissolved.

    For the same gas in the same amount of solvent, the mole fraction of dissolved ethane is proportional to its mass, so

    p∝m⇒p2p1=m2m1p \propto m \qquad\Rightarrow\qquad \frac{p_2}{p_1} = \frac{m_2}{m_1}

    Class 12 Chemistry Solutions

    Given: m1=6.56×10−3m_1 = 6.56 \times 10^{-3} g at p1=1p_1 = 1 bar; m2=5.00×10−2m_2 = 5.00 \times 10^{-2} g.

    p2=p1×m2m1=1×5.00×10−26.56×10−3=7.62 barp_2 = p_1 \times \frac{m_2}{m_1} = 1 \times \frac{5.00 \times 10^{-2}}{6.56 \times 10^{-3}} = 7.62\ \text{bar}

    Answer: The partial pressure of ethane must be 7.62 bar. (About 7.6 times as much gas is dissolved, so about 7.6 times the pressure is needed.)

  14. 14

    Question 14

    What is meant by positive and negative deviations from Raoult's law and how is the sign of ΔmixH\Delta_{mix}H related to positive and negative deviations from Raoult's law?

    Easy
    3 marks
    Solve with AI
    Written solution

    Raoult's law for a solution of two volatile liquids A and B: pA=xA pA∘p_A = x_A\,p_A^\circ and pB=xB pB∘p_B = x_B\,p_B^\circ. A solution that obeys it at every composition is ideal. A non-ideal solution does not, and its vapour pressure is either higher or lower than Raoult's law predicts.

    Positive deviation — the vapour pressure is higher than predicted: pA>xApA∘p_A > x_A p_A^\circ and pB>xBpB∘p_B > x_B p_B^\circ.

    • Cause: A–B attractions are weaker than A–A and B–B attractions, so molecules escape more easily.
    • Examples: ethanol + acetone; carbon disulphide + acetone; ethanol + water.

    Negative deviation — the vapour pressure is lower than predicted: pA<xApA∘p_A < x_A p_A^\circ and pB<xBpB∘p_B < x_B p_B^\circ.

    • Cause: A–B attractions are stronger than A–A and B–B attractions, so molecules escape less easily.
    • Examples: chloroform + acetone (hydrogen bond between Cl3C–H\text{Cl}_3\text{C–H} and O=C\text{O=C}); phenol + aniline; nitric acid + water.

    Class 12 Chemistry Solutions

    Relation with ΔmixH\Delta_{\text{mix}}H:

    DeviationA–B vs A–A, B–BΔmixH\Delta_{\text{mix}}HΔmixV\Delta_{\text{mix}}V
    Positiveweaker>0> 0 (endothermic, heat absorbed)>0> 0 (expansion)
    Negativestronger<0< 0 (exothermic, heat released)<0< 0 (contraction)
    None (ideal)equal=0= 0=0= 0

    For positive deviation, energy is needed to break the stronger A–A and B–B bonds and is not fully returned by the weaker A–B bonds, so mixing absorbs heat. For negative deviation, the new stronger A–B bonds release more energy than was spent, so mixing gives out heat.

  15. 15

    Question 15

    An aqueous solution of 2% non-volatile solute exerts a pressure of 1.004 bar at the normal boiling point of the solvent. What is the molar mass of the solute?

    Hard
    4 marks
    Solve with AI
    Written solution

    Key fact: At its normal boiling point, the vapour pressure of pure water equals 1 atm =1.013= 1.013 bar. So p∘=1.013p^\circ = 1.013 bar and the solution's vapour pressure is p=1.004p = 1.004 bar.

    Given: 2% solution → take 100 g: solute w2=2w_2 = 2 g, water w1=98w_1 = 98 g, M1=18 g mol−1M_1 = 18\ \text{g mol}^{-1}.

    Class 12 Chemistry Solutions

    Relative lowering of vapour pressure (Raoult's law for a non-volatile solute). For a dilute solution n2≪n1n_2 \ll n_1, so

    p∘−pp∘=x2≈n2n1=w2 M1M2 w1\frac{p^\circ - p}{p^\circ} = x_2 \approx \frac{n_2}{n_1} = \frac{w_2\,M_1}{M_2\,w_1}

    Substitute:

    1.013−1.0041.013=2×18M2×98\frac{1.013 - 1.004}{1.013} = \frac{2 \times 18}{M_2 \times 98}

    0.008885=3698 M2⇒M2=3698×0.008885=41.35 g mol−10.008885 = \frac{36}{98\,M_2} \quad\Rightarrow\quad M_2 = \frac{36}{98 \times 0.008885} = 41.35\ \text{g mol}^{-1}

    Answer: The molar mass of the solute is about 41.35 g mol⁻¹.

    Note: If the exact form x2=n2n1+n2x_2 = \dfrac{n_2}{n_1 + n_2} is used instead of the dilute-solution approximation, the answer comes out as 41.0 g mol−141.0\ \text{g mol}^{-1}. Both are accepted; the approximation is the one NCERT uses.

  16. 16

    Question 16

    Heptane and octane form an ideal solution. At 373 K, the vapour pressures of the two liquid components are 105.2 kPa and 46.8 kPa respectively. What will be the vapour pressure of a mixture of 26.0 g of heptane and 35 g of octane?

    Medium
    3 marks
    Solve with AI
    Written solution

    Given: pheptane∘=105.2p^\circ_{\text{heptane}} = 105.2 kPa, poctane∘=46.8p^\circ_{\text{octane}} = 46.8 kPa (at 373 K); ideal solution.

    Molar masses: heptane C7H16=100 g mol−1\text{C}_7\text{H}_{16} = 100\ \text{g mol}^{-1}, octane C8H18=114 g mol−1\text{C}_8\text{H}_{18} = 114\ \text{g mol}^{-1}.

    Step 1 — moles

    nheptane=26.0100=0.260 mol,noctane=35.0114=0.307 moln_{\text{heptane}} = \frac{26.0}{100} = 0.260\ \text{mol}, \qquad n_{\text{octane}} = \frac{35.0}{114} = 0.307\ \text{mol}

    Step 2 — mole fractions

    xheptane=0.2600.260+0.307=0.4585,xoctane=0.5415x_{\text{heptane}} = \frac{0.260}{0.260 + 0.307} = 0.4585, \qquad x_{\text{octane}} = 0.5415

    Step 3 — Raoult's law

    pheptane=0.4585×105.2=48.24 kPa,poctane=0.5415×46.8=25.34 kPap_{\text{heptane}} = 0.4585 \times 105.2 = 48.24\ \text{kPa}, \qquad p_{\text{octane}} = 0.5415 \times 46.8 = 25.34\ \text{kPa}

    ptotal=48.24+25.34=73.58 kPa≈73.6 kPap_{\text{total}} = 48.24 + 25.34 = 73.58\ \text{kPa} \approx 73.6\ \text{kPa}

    Class 12 Chemistry Solutions

    Answer: The vapour pressure of the mixture is about 73.6 kPa. It lies between the two pure vapour pressures, on the straight Raoult's-law line joining them.

  17. 17

    Question 17

    The vapour pressure of water is 12.3 kPa at 300 K. Calculate vapour pressure of 1 molal solution of a non-volatile solute in it.

    Medium
    3 marks
    Solve with AI
    Written solution

    Given: p∘=12.3p^\circ = 12.3 kPa; 1 molal solution → 1 mol of solute in 1000 g of water.

    Step 1 — moles of water

    n1=100018=55.56 mol,n2=1 moln_1 = \frac{1000}{18} = 55.56\ \text{mol}, \qquad n_2 = 1\ \text{mol}

    Step 2 — mole fraction of water

    x1=55.5655.56+1=0.9823x_1 = \frac{55.56}{55.56 + 1} = 0.9823

    Step 3 — Raoult's law (only water is volatile)

    p=x1 p∘=0.9823×12.3=12.08 kPap = x_1\,p^\circ = 0.9823 \times 12.3 = 12.08\ \text{kPa}

    Class 12 Chemistry Solutions

    Answer: The vapour pressure of the solution is 12.08 kPa — lowered by 0.220.22 kPa because solute particles take up part of the surface and fewer water molecules escape.

  18. 18

    Question 18

    Calculate the mass of a non-volatile solute (molar mass 40 g mol−1^{-1}) which should be dissolved in 114 g octane to reduce its vapour pressure to 80%.

    Hard
    3 marks
    Solve with AI
    Written solution

    Given: solvent octane (C8H18\text{C}_8\text{H}_{18}, M1=114 g mol−1M_1 = 114\ \text{g mol}^{-1}), mass 114 g; solute M2=40 g mol−1M_2 = 40\ \text{g mol}^{-1}; vapour pressure falls to 80% of the pure value.

    Step 1 — mole fraction of the solvent

    pp∘=x1=0.80(Raoult’s law)\frac{p}{p^\circ} = x_1 = 0.80 \qquad (\text{Raoult's law})

    Step 2 — moles of octane

    n1=114114=1.00 moln_1 = \frac{114}{114} = 1.00\ \text{mol}

    Step 3 — moles of solute

    x1=n1n1+n2  ⇒  0.80=1.001.00+n2  ⇒  n2=0.25 molx_1 = \frac{n_1}{n_1 + n_2} \;\Rightarrow\; 0.80 = \frac{1.00}{1.00 + n_2} \;\Rightarrow\; n_2 = 0.25\ \text{mol}

    Step 4 — mass of solute

    w2=n2×M2=0.25×40=10 gw_2 = n_2 \times M_2 = 0.25 \times 40 = 10\ \text{g}

    Class 12 Chemistry Solutions

    Answer: 10 g of the solute is needed.

    Why not the short formula? The shortcut p∘−pp∘≈n2n1\dfrac{p^\circ - p}{p^\circ} \approx \dfrac{n_2}{n_1} works only for dilute solutions. Here the lowering is 20% — far from dilute — and the shortcut would give 8 g, which is not accurate.

  19. 19

    Question 19

    A solution containing 30 g of non-volatile solute exactly in 90 g of water has a vapour pressure of 2.8 kPa at 298 K. Further, 18 g of water is then added to the solution and the new vapour pressure becomes 2.9 kPa at 298 K. Calculate:
    (i) molar mass of the solute
    (ii) vapour pressure of water at 298 K.

    Hard
    5 marks
    Solve with AI
    Written solution

    Given: solute w2=30w_2 = 30 g; water 90 g at first, then 108 g; vapour pressures 2.8 kPa and 2.9 kPa at 298 K. Let the solute's molar mass be MM and pure water's vapour pressure be p∘p^\circ.

    For a non-volatile solute, Raoult's law gives p=x1 p∘p = x_1\,p^\circ.

    First solution: n1=9018=5n_1 = \dfrac{90}{18} = 5 mol, n2=30Mn_2 = \dfrac{30}{M}

    2.8=55+30M p∘(1)2.8 = \frac{5}{5 + \frac{30}{M}}\,p^\circ \qquad \text{(1)}

    After adding 18 g of water: n1=10818=6n_1 = \dfrac{108}{18} = 6 mol

    2.9=66+30M p∘(2)2.9 = \frac{6}{6 + \frac{30}{M}}\,p^\circ \qquad \text{(2)}

    Class 12 Chemistry Solutions

    Divide (1) by (2) to remove p∘p^\circ:

    2.82.9=5(6+30M)6(5+30M)\frac{2.8}{2.9} = \frac{5\left(6 + \frac{30}{M}\right)}{6\left(5 + \frac{30}{M}\right)}

    Multiply both sides by MM and cross-multiply:

    2.8×6 (5M+30)=2.9×5 (6M+30)2.8 \times 6\,(5M + 30) = 2.9 \times 5\,(6M + 30)

    84M+504=87M+435⇒3M=69⇒M=23 g mol−184M + 504 = 87M + 435 \quad\Rightarrow\quad 3M = 69 \quad\Rightarrow\quad M = 23\ \text{g mol}^{-1}

    Put M=23M = 23 in (1): n2=3023=1.304n_2 = \dfrac{30}{23} = 1.304 mol

    p∘=2.8×5+1.3045=3.53 kPap^\circ = 2.8 \times \frac{5 + 1.304}{5} = 3.53\ \text{kPa}

    Answer: (i) molar mass of solute =23 g mol−1= 23\ \text{g mol}^{-1}; (ii) vapour pressure of water at 298 K =3.53= 3.53 kPa. Adding water dilutes the solution, so its vapour pressure moves up towards p∘p^\circ — exactly what the data shows (2.8 → 2.9 kPa).

  20. 20

    Question 20

    A 5% solution (by mass) of cane sugar in water has freezing point of 271 K. Calculate the freezing point of 5% glucose in water if freezing point of pure water is 273.15 K.

    Medium
    4 marks
    Solve with AI
    Written solution

    Idea: Both solutions use the same solvent (water) and the same masses (5 g solute in 95 g water). So ΔTf=Kf m\Delta T_f = K_f\,m depends only on the number of moles of solute, i.e. inversely on the molar mass. We do not need the value of KfK_f.

    Cane sugar solution: ΔTf=273.15−271=2.15\Delta T_f = 273.15 - 271 = 2.15 K.

    ΔTf=Kf×w2×1000M2×w1\Delta T_f = K_f \times \frac{w_2 \times 1000}{M_2 \times w_1}

    With KfK_f, w2w_2 and w1w_1 the same for both solutions,

    ΔTf(glucose)ΔTf(sugar)=M(sugar)M(glucose)=342180\frac{\Delta T_f(\text{glucose})}{\Delta T_f(\text{sugar})} = \frac{M(\text{sugar})}{M(\text{glucose})} = \frac{342}{180}

    ΔTf(glucose)=2.15×342180=4.085 K\Delta T_f(\text{glucose}) = 2.15 \times \frac{342}{180} = 4.085\ \text{K}

    Freezing point of the glucose solution:

    Tf=273.15−4.085=269.07 KT_f = 273.15 - 4.085 = 269.07\ \text{K}

    Class 12 Chemistry Solutions

    Answer: 269.07 K. A gram of glucose contains about twice as many molecules as a gram of cane sugar (342/180≈1.9342/180 \approx 1.9), so it lowers the freezing point about twice as much.

  21. 21

    Question 21

    Two elements A and B form compounds having formula AB2AB_2 and AB4AB_4. When dissolved in 20 g of benzene (C6H6C_6H_6), 1 g of AB2AB_2 lowers the freezing point by 2.3 K whereas 1.0 g of AB4AB_4 lowers it by 1.3 K. The molar depression constant for benzene is 5.1 K kg mol−1^{-1}. Calculate atomic masses of A and B.

    Hard
    4 marks
    Solve with AI
    Written solution

    Formula for the molar mass from freezing-point depression:

    M2=Kf×w2×1000ΔTf×w1M_2 = \frac{K_f \times w_2 \times 1000}{\Delta T_f \times w_1}

    Given: Kf(benzene)=5.1 K kg mol−1K_f(\text{benzene}) = 5.1\ \text{K kg mol}^{-1}, w1=20w_1 = 20 g, w2=1w_2 = 1 g for each compound.

    For AB2AB_2 (ΔTf=2.3\Delta T_f = 2.3 K):

    M(AB2)=5.1×1×10002.3×20=110.87 g mol−1M(AB_2) = \frac{5.1 \times 1 \times 1000}{2.3 \times 20} = 110.87\ \text{g mol}^{-1}

    For AB4AB_4 (ΔTf=1.3\Delta T_f = 1.3 K):

    M(AB4)=5.1×1×10001.3×20=196.15 g mol−1M(AB_4) = \frac{5.1 \times 1 \times 1000}{1.3 \times 20} = 196.15\ \text{g mol}^{-1}

    Class 12 Chemistry Solutions

    Set up two equations. Let the atomic masses be aa (for A) and bb (for B):

    a+2b=110.87(1)a + 2b = 110.87 \qquad \text{(1)}

    a+4b=196.15(2)a + 4b = 196.15 \qquad \text{(2)}

    Subtract (1) from (2): 2b=85.28⇒b=42.642b = 85.28 \Rightarrow b = 42.64. Then a=110.87−2(42.64)=25.59a = 110.87 - 2(42.64) = 25.59.

    Answer: atomic mass of A = 25.59 u and of B = 42.64 u. (Check: AB4AB_4 has two more B atoms than AB2AB_2, and its molar mass is larger by 85.28=2×42.6485.28 = 2 \times 42.64.)

  22. 22

    Question 22

    At 300 K, 36 g of glucose present in a litre of its solution has an osmotic pressure of 4.98 bar. If the osmotic pressure of the solution is 1.52 bars at the same temperature, what would be its concentration?

    Easy
    2 marks
    Solve with AI
    Written solution

    Law used: π=CRT\pi = CRT. At the same temperature, π∝C\pi \propto C:

    π1π2=C1C2\frac{\pi_1}{\pi_2} = \frac{C_1}{C_2}

    Concentration of the first solution: M(glucose)=180 g mol−1M(\text{glucose}) = 180\ \text{g mol}^{-1}

    C1=36/180 mol1 L=0.20 mol L−1C_1 = \frac{36/180\ \text{mol}}{1\ \text{L}} = 0.20\ \text{mol L}^{-1}

    Second solution:

    C2=C1×π2π1=0.20×1.524.98=0.061 mol L−1C_2 = C_1 \times \frac{\pi_2}{\pi_1} = 0.20 \times \frac{1.52}{4.98} = 0.061\ \text{mol L}^{-1}

    Class 12 Chemistry Solutions

    Answer: 0.061 M. The osmotic pressure dropped to about 0.3 times, so the concentration also dropped to about 0.3 times.

  23. 23

    Question 23

    Suggest the most important type of intermolecular attractive interaction in the following pairs.

    (i) n-hexane and n-octane
    (ii) I2I_2 and CCl4CCl_4
    (iii) NaClO4NaClO_4 and water
    (iv) methanol and acetone
    (v) acetonitrile (CH3CNCH_3CN) and acetone (C3H6OC_3H_6O).

    Easy
    5 marks
    Solve with AI
    Written solution
    PairNature of the two componentsMost important attraction
    (i) n-hexane and n-octaneboth non-polar hydrocarbonsLondon (dispersion) forces — van der Waals forces
    (ii) I2\text{I}_2 and CCl4\text{CCl}_4both non-polar moleculesLondon (dispersion) forces
    (iii) NaClO4\text{NaClO}_4 and waterions (Na+\text{Na}^+, ClO4−\text{ClO}_4^-) + polar waterIon–dipole interaction
    (iv) methanol and acetoneCH3O–H\text{CH}_3\text{O–H} can donate an H; acetone's C=O\text{C=O} oxygen can accept itHydrogen bonding (O–H···O=C)
    (v) acetonitrile and acetoneboth polar, but neither has H on N, O or FDipole–dipole interaction

    Class 12 Chemistry Solutions

    How to decide:

    • An ion with a polar solvent → ion–dipole.
    • An O–H or N–H in one molecule and a lone-pair O or N in the other → hydrogen bonding (strongest of the molecular attractions).
    • Two polar molecules with no such H → dipole–dipole.
    • Two non-polar molecules → London dispersion forces only.
  24. 24

    Question 24

    Based on solute-solvent interactions, arrange the following in order of increasing solubility in n-octane and explain.

    Cyclohexane, KClKCl, CH3OHCH_3OH, CH3CNCH_3CN.

    Medium
    2 marks
    Solve with AI
    Written solution

    Principle — "like dissolves like": n-octane is non-polar, so a solute dissolves in it well only if it too is non-polar (or nearly so). The more polar or ionic the solute, the less soluble it is.

    SoluteNatureSolubility in n-octane
    KClionic — strong ion–ion attractions that octane cannot replacelowest (practically insoluble)
    CH3OH\text{CH}_3\text{OH}polar, hydrogen-bonded to itself; these bonds would be lost in octanevery low
    CH3CN\text{CH}_3\text{CN}polar, but no hydrogen bonding between its own moleculeslow, but more than methanol
    Cyclohexanenon-polar hydrocarbon, like octanehighest (miscible)

    Class 12 Chemistry Solutions

    Increasing order of solubility in n-octane:

    KCl<CH3OH<CH3CN<cyclohexane\text{KCl} < \text{CH}_3\text{OH} < \text{CH}_3\text{CN} < \text{cyclohexane}

  25. 25

    Question 25

    Amongst the following compounds, identify which are insoluble, partially soluble, and highly soluble in water?

    (i) phenol
    (ii) toluene
    (iii) formic acid
    (iv) ethylene glycol
    (v) chloroform
    (vi) pentanol.

    Medium
    3 marks
    Solve with AI
    Written solution

    What decides solubility in water: water is polar and hydrogen-bonded. A compound dissolves well if it can hydrogen-bond with water and its non-polar (hydrocarbon) part is small.

    CompoundH-bonding groupSize of non-polar partVerdict
    (iii) Formic acid, HCOOH–COOHtinyhighly soluble
    (iv) Ethylene glycol, HO–CH₂–CH₂–OHtwo –OHtinyhighly soluble (miscible)
    (i) Phenol, C₆H₅OHone –OHlarge benzene ringpartially soluble
    (vi) Pentanol, C₅H₁₁OHone –OHlong 5-carbon chainpartially soluble
    (ii) Toluene, C₆H₅CH₃nonewhole moleculeinsoluble
    (v) Chloroform, CHCl₃none (cannot H-bond with water effectively)whole moleculeinsoluble

    Class 12 Chemistry Solutions

    Summary: highly soluble — formic acid, ethylene glycol; partially soluble — phenol, pentanol; insoluble — toluene, chloroform.

  26. 26

    Question 26

    If the density of some lake water is 1.25 g mL−1^{-1} and contains 92 g of Na+\text{Na}^+ ions per kg of water, calculate the molarity of Na+\text{Na}^+ ions in the lake.

    Easy
    2 marks
    Solve with AI
    Written solution

    Given: 92 g of Na+\text{Na}^+ per 1 kg (1000 g) of water; density of lake water =1.25 g mL−1= 1.25\ \text{g mL}^{-1}; M(Na)=23 g mol−1M(\text{Na}) = 23\ \text{g mol}^{-1}.

    Step 1 — moles of Na+\text{Na}^+

    n=9223=4.0 moln = \frac{92}{23} = 4.0\ \text{mol}

    Step 2 — volume of the solution that contains these ions

    Mass of solution =1000 g (water)+92 g (ions)=1092= 1000\ \text{g (water)} + 92\ \text{g (ions)} = 1092 g

    V=1092 g1.25 g mL−1=873.6 mL=0.8736 LV = \frac{1092\ \text{g}}{1.25\ \text{g mL}^{-1}} = 873.6\ \text{mL} = 0.8736\ \text{L}

    Step 3 — molarity

    M=4.00.8736=4.58 mol L−1M = \frac{4.0}{0.8736} = 4.58\ \text{mol L}^{-1}

    Class 12 Chemistry Solutions

    Answer: The molarity of Na+\text{Na}^+ ions is about 4.58 M.

    Note: Many books ignore the 92 g of ions and take the solution mass as 1000 g, which gives V=800V = 800 mL and M=5M = 5 M. Including the ions is more accurate. (The molality, for comparison, is simply 4.0 mol kg−14.0\ \text{mol kg}^{-1} — density is not needed for that.)

  27. 27

    Question 27

    If the solubility product of CuSCuS is 6×10−166 \times 10^{-16}, calculate the maximum molarity of CuSCuS in aqueous solution.

    Medium
    2 marks
    Solve with AI
    Written solution

    Dissolution equilibrium:

    CuS(s)⇌Cu2+(aq)+S2−(aq)\text{CuS}(s) \rightleftharpoons \text{Cu}^{2+}(aq) + \text{S}^{2-}(aq)

    If ss mol L⁻¹ of CuS dissolves, it gives ss mol L⁻¹ of Cu2+\text{Cu}^{2+} and ss mol L⁻¹ of S2−\text{S}^{2-}.

    Ksp=[Cu2+][S2−]=s×s=s2K_{sp} = [\text{Cu}^{2+}][\text{S}^{2-}] = s \times s = s^2

    s=Ksp=6×10−16=2.45×10−8 mol L−1s = \sqrt{K_{sp}} = \sqrt{6 \times 10^{-16}} = 2.45 \times 10^{-8}\ \text{mol L}^{-1}

    Class 12 Chemistry Solutions

    Answer: The maximum molarity of CuS in water is 2.45×10−82.45 \times 10^{-8} M. That is only about 2.3 μg of CuS per litre, which is why CuS is called insoluble.

  28. 28

    Question 28

    Calculate the mass percentage of aspirin (C9H8O4C_9H_8O_4) in acetonitrile (CH3CNCH_3CN) when 6.5 g of C9H8O4C_9H_8O_4 is dissolved in 450 g of CH3CNCH_3CN.

    Easy
    2 marks
    Solve with AI
    Written solution

    Mass percentage =mass of solutemass of solution×100= \dfrac{\text{mass of solute}}{\text{mass of solution}} \times 100

    Given: aspirin (C9H8O4\text{C}_9\text{H}_8\text{O}_4, solute) =6.5= 6.5 g; acetonitrile (CH3CN\text{CH}_3\text{CN}, solvent) =450= 450 g.

    Mass of solution =6.5+450=456.5= 6.5 + 450 = 456.5 g

    Mass % of aspirin=6.5456.5×100=1.42%\text{Mass \% of aspirin} = \frac{6.5}{456.5} \times 100 = 1.42\%

    Class 12 Chemistry Solutions

    Answer: 1.42% aspirin by mass. (A common slip is to divide by 450 g — the mass of solvent — which gives 1.44%. Mass percentage is always out of the mass of the solution.)

  29. 29

    Question 29

    Nalorphene (C19H21NO3C_{19}H_{21}NO_3), similar to morphine, is used to combat withdrawal symptoms in narcotic users. The dose of nalorphene generally given is 1.5 mg. Calculate the mass of 1.5×10−31.5 \times 10^{-3} m aqueous solution required for the above dose.

    Hard
    3 marks
    Solve with AI
    Written solution

    Given: dose =1.5= 1.5 mg =1.5×10−3= 1.5 \times 10^{-3} g of nalorphene; solution is 1.5×10−31.5 \times 10^{-3} molal (mol per kg of water).

    Molar mass of C19H21NO3=19(12)+21(1)+14+3(16)=311 g mol−1\text{C}_{19}\text{H}_{21}\text{NO}_3 = 19(12) + 21(1) + 14 + 3(16) = 311\ \text{g mol}^{-1}.

    Step 1 — moles in one dose

    n=1.5×10−3311=4.82×10−6 moln = \frac{1.5 \times 10^{-3}}{311} = 4.82 \times 10^{-6}\ \text{mol}

    Step 2 — mass of water that holds this amount

    1.5×10−31.5 \times 10^{-3} mol is present in 1000 g of water, so

    water=4.82×10−61.5×10−3×1000=3.215 g\text{water} = \frac{4.82 \times 10^{-6}}{1.5 \times 10^{-3}} \times 1000 = 3.215\ \text{g}

    Step 3 — mass of solution (water + nalorphene)

    3.215+0.0015=3.22 g3.215 + 0.0015 = 3.22\ \text{g}

    Class 12 Chemistry Solutions

    Answer: about 3.22 g of the solution provides one 1.5 mg dose.

  30. 30

    Question 30

    Calculate the amount of benzoic acid (C6H5COOHC_6H_5COOH) required for preparing 250 mL of 0.15 M solution in methanol.

    Medium
    2 marks
    Solve with AI
    Written solution

    Given: 250 mL of 0.15 M solution (the solvent is methanol, but molarity only needs the volume of solution).

    Step 1 — moles needed

    n=M×V=0.15 mol L−1×0.250 L=0.0375 moln = M \times V = 0.15\ \text{mol L}^{-1} \times 0.250\ \text{L} = 0.0375\ \text{mol}

    Step 2 — molar mass of benzoic acid (C6H5COOH=C7H6O2\text{C}_6\text{H}_5\text{COOH} = \text{C}_7\text{H}_6\text{O}_2)

    7(12)+6(1)+2(16)=122 g mol−17(12) + 6(1) + 2(16) = 122\ \text{g mol}^{-1}

    Step 3 — mass

    w=0.0375×122=4.575 gw = 0.0375 \times 122 = 4.575\ \text{g}

    Class 12 Chemistry Solutions

    Answer: 4.575 g (≈ 4.58 g) of benzoic acid is dissolved in methanol and the volume is made up to 250 mL in a volumetric flask.

  31. 31

    Question 31

    The depression in freezing point of water observed for the same amount of acetic acid, trichloroacetic acid, and trifluoroacetic acid increases in the order given above. Explain briefly.

    Medium
    3 marks
    Solve with AI
    Written solution

    Freezing-point depression is a colligative property — it depends on the number of solute particles, not on their identity. The three acids are taken in the same amount, so the one that ionises most gives the most particles and the largest ΔTf\Delta T_f.

    RCOOH⇌RCOO−+H+\text{RCOOH} \rightleftharpoons \text{RCOO}^- + \text{H}^+

    Why ionisation increases: the groups attached to −COOH-\text{COOH} pull electron density away (−I inductive effect) and stabilise the anion RCOO−\text{RCOO}^- formed.

    • −CH3-\text{CH}_3 is electron-releasing → acetic acid is a weak acid.
    • −CCl3-\text{CCl}_3: three Cl atoms pull electrons strongly → much stronger acid.
    • −CF3-\text{CF}_3: F is the most electronegative element → strongest acid of the three.

    Acid strength and ΔTf:CH3COOH<CCl3COOH<CF3COOH\text{Acid strength and } \Delta T_f:\quad \text{CH}_3\text{COOH} < \text{CCl}_3\text{COOH} < \text{CF}_3\text{COOH}

    Class 12 Chemistry Solutions

    Stronger acid → greater ionisation → more ions in solution → larger van't Hoff factor ii → larger depression in freezing point (ΔTf=i Kf m\Delta T_f = i\,K_f\,m).

  32. 32

    Question 32

    Calculate the depression in the freezing point of water when 10 g of CH3CH2CHClCOOHCH_3CH_2CHClCOOH is added to 250 g of water.

    Given: Ka=1.4×10−3K_a = 1.4 \times 10^{-3}, Kf=1.86K_f = 1.86 K kg mol−1^{-1}.

    Medium
    3 marks
    Solve with AI
    Written solution

    Given: 10 g of 2-chlorobutanoic acid (CH3CH2CHClCOOH=C4H7ClO2\text{CH}_3\text{CH}_2\text{CHClCOOH} = \text{C}_4\text{H}_7\text{ClO}_2) in 250 g of water; Ka=1.4×10−3K_a = 1.4 \times 10^{-3}; Kf=1.86 K kg mol−1K_f = 1.86\ \text{K kg mol}^{-1}.

    Step 1 — molar mass and molality

    M=4(12)+7(1)+35.5+2(16)=122.5 g mol−1M = 4(12) + 7(1) + 35.5 + 2(16) = 122.5\ \text{g mol}^{-1}

    m=10/122.50.250=0.3265 mol kg−1m = \frac{10/122.5}{0.250} = 0.3265\ \text{mol kg}^{-1}

    Step 2 — degree of dissociation from KaK_a (take c≈mc \approx m for a dilute aqueous solution)

    HA⇌H++A−,Ka=cα21−α\text{HA} \rightleftharpoons \text{H}^+ + \text{A}^-, \qquad K_a = \frac{c\alpha^2}{1 - \alpha}

    0.3265 α2+1.4×10−3 α−1.4×10−3=00.3265\,\alpha^2 + 1.4 \times 10^{-3}\,\alpha - 1.4 \times 10^{-3} = 0

    α=−1.4×10−3+(1.4×10−3)2+4(0.3265)(1.4×10−3)2(0.3265)=0.0634\alpha = \frac{-1.4 \times 10^{-3} + \sqrt{(1.4 \times 10^{-3})^2 + 4(0.3265)(1.4 \times 10^{-3})}}{2(0.3265)} = 0.0634

    Step 3 — van't Hoff factor. Each molecule that dissociates gives 2 particles instead of 1:

    i=(1−α)+2α=1+α=1.0634i = (1 - \alpha) + 2\alpha = 1 + \alpha = 1.0634

    Class 12 Chemistry Solutions

    Step 4 — depression in freezing point

    ΔTf=i Kf m=1.0634×1.86×0.3265=0.646 K\Delta T_f = i\,K_f\,m = 1.0634 \times 1.86 \times 0.3265 = 0.646\ \text{K}

    Answer: ΔTf≈\Delta T_f \approx 0.65 K. (Without dissociation it would be 0.607 K; the 6% ionisation adds about 0.04 K.)

  33. 33

    Question 33

    19.5 g of CH2FCOOHCH_2FCOOH is dissolved in 500 g of water. The depression in the freezing point of water observed is 1.00°C. Calculate the van’t Hoff factor and dissociation constant of fluoroacetic acid.

    Medium
    3 marks
    Solve with AI
    Written solution

    Given: 19.5 g of fluoroacetic acid (CH2FCOOH\text{CH}_2\text{FCOOH}) in 500 g of water; ΔTf=1.00\Delta T_f = 1.00 K; Kf=1.86 K kg mol−1K_f = 1.86\ \text{K kg mol}^{-1}.

    Step 1 — molality if there were no dissociation

    M=2(12)+3(1)+19+2(16)=78 g mol−1,m=19.5/780.500=0.50 mol kg−1M = 2(12) + 3(1) + 19 + 2(16) = 78\ \text{g mol}^{-1}, \qquad m = \frac{19.5/78}{0.500} = 0.50\ \text{mol kg}^{-1}

    ΔTf(calculated)=Kf m=1.86×0.50=0.93 K\Delta T_f(\text{calculated}) = K_f\,m = 1.86 \times 0.50 = 0.93\ \text{K}

    Step 2 — van't Hoff factor

    i=ΔTf(observed)ΔTf(calculated)=1.000.93=1.0753i = \frac{\Delta T_f(\text{observed})}{\Delta T_f(\text{calculated})} = \frac{1.00}{0.93} = 1.0753

    Step 3 — degree of dissociation

    CH2FCOOH⇌CH2FCOO−+H+,i=1+α  ⇒  α=0.07527\text{CH}_2\text{FCOOH} \rightleftharpoons \text{CH}_2\text{FCOO}^- + \text{H}^+, \qquad i = 1 + \alpha \;\Rightarrow\; \alpha = 0.07527

    Class 12 Chemistry Solutions

    Step 4 — dissociation constant (take c≈0.50c \approx 0.50 M)

    Ka=cα21−α=0.50×(0.07527)21−0.07527=2.833×10−30.92473=3.06×10−3K_a = \frac{c\alpha^2}{1 - \alpha} = \frac{0.50 \times (0.07527)^2}{1 - 0.07527} = \frac{2.833 \times 10^{-3}}{0.92473} = 3.06 \times 10^{-3}

    Answer: van't Hoff factor i=1.075i = 1.075; Ka≈3.06×10−3K_a \approx 3.06 \times 10^{-3}.

    Tip: keep α to at least three significant figures before squaring. Rounding it to 0.075 first gives 3.04×10−33.04 \times 10^{-3} — a visible error in the final answer.

  34. 34

    Question 34

    The vapour pressure of water at 293 K is 17.535 mm Hg. Calculate the vapour pressure of water at 293 K when 25 g of glucose is dissolved in 450 g of water.

    Medium
    2 marks
    Solve with AI
    Written solution

    Given: p∘(water)=17.535p^\circ(\text{water}) = 17.535 mm Hg at 293 K; 25 g glucose (M=180M = 180) in 450 g water (M=18M = 18).

    Step 1 — moles

    nglucose=25180=0.139 mol,nwater=45018=25.0 moln_{\text{glucose}} = \frac{25}{180} = 0.139\ \text{mol}, \qquad n_{\text{water}} = \frac{450}{18} = 25.0\ \text{mol}

    Step 2 — mole fraction of water

    xwater=25.025.0+0.139=0.99447x_{\text{water}} = \frac{25.0}{25.0 + 0.139} = 0.99447

    Step 3 — Raoult's law

    p=xwater p∘=0.99447×17.535=17.44 mm Hgp = x_{\text{water}}\,p^\circ = 0.99447 \times 17.535 = 17.44\ \text{mm Hg}

    Class 12 Chemistry Solutions

    Answer: 17.44 mm Hg — about 0.10 mm Hg lower than pure water.

  35. 35

    Question 35

    Henry’s law constant for the molality of methane in benzene at 298 K is 4.27×1054.27 \times 10^5 mm Hg. Calculate the solubility of methane in benzene at 298 K under 760 mm Hg.

    Medium
    2 marks
    Solve with AI
    Written solution

    Henry's law: p=KH xp = K_H\,x, so the solubility (as mole fraction) is

    x=pKHx = \frac{p}{K_H}

    Given: KH=4.27×105K_H = 4.27 \times 10^5 mm Hg, p=760p = 760 mm Hg, 298 K.

    x=7604.27×105=1.78×10−3x = \frac{760}{4.27 \times 10^5} = 1.78 \times 10^{-3}

    Class 12 Chemistry Solutions

    Answer: The solubility of methane in benzene is 1.78×10−31.78 \times 10^{-3} (expressed as mole fraction; the question calls it the molality form).

    Why so small? KHK_H is very large — methane is a non-polar gas that dissolves only slightly. Even at 1 atm, fewer than 2 in every 1000 molecules in the solution are methane.

  36. 36

    Question 36

    100 g of liquid A (molar mass 140 g mol−1^{-1}) was dissolved in 1000 g of liquid B (molar mass 180 g mol−1^{-1}). The vapour pressure of pure liquid B was found to be 500 Torr. Calculate the vapour pressure of pure liquid A and its vapour pressure in the solution if the total vapour pressure of the solution is 475 Torr.

    Medium
    3 marks
  37. 37

    Question 37

    Vapour pressures of pure acetone and chloroform at 328 K are 741.8 mm Hg and 632.8 mm Hg respectively. Assuming that they form an ideal solution over the entire range of composition, plot ptotalp_{\text{total}}, pchloroformp_{\text{chloroform}} and pacetonep_{\text{acetone}} as a function of xacetonex_{\text{acetone}}. The experimental data observed for different compositions of the mixture is:

    100×xacetone100 \times x_{\text{acetone}}011.823.436.050.858.264.572.1
    pacetonep_{\text{acetone}} / mm Hg054.9110.1202.4322.7405.9454.1521.1
    pchloroformp_{\text{chloroform}} / mm Hg632.8548.1469.4359.7257.7193.6161.2120.7

    Plot this data also on the same graph paper. Indicate whether it has positive deviation or negative deviation from the ideal solution.

    Hard
    3 marks
  38. 38

    Question 38

    Benzene and toluene form an ideal solution over the entire range of composition. The vapour pressures of pure benzene and toluene at 300 K are 50.71 mm Hg and 32.06 mm Hg, respectively. Calculate the mole fraction of benzene in the vapour phase if 80 g of benzene is mixed with 100 g of toluene.

    Medium
    3 marks
  39. 39

    Question 39

    The air is a mixture of a number of gases. The major components are oxygen and nitrogen with approximate proportions of 20% and 79% by volume at 298 K. The water is in equilibrium with air at a pressure of 10 atm. At 298 K, the Henry's law constants for oxygen and nitrogen are 3.30×1073.30 \times 10^7 mm and 6.51×1076.51 \times 10^7 mm respectively. Calculate the composition of these gases in water.

    Hard
    3 marks
  40. 40

    Question 40

    Determine the amount of CaCl2CaCl_2 (i=2.47i = 2.47) dissolved in 2.5 litres of water such that its osmotic pressure is 0.75 atm at 27°C.

    Medium
    2 marks
  41. 41

    Question 41

    Determine the osmotic pressure of a solution prepared by dissolving 25 mg of K2SO4\text{K}_2\text{SO}_4 in 2 litres of water at 25°C, assuming that it is completely dissociated.

    Medium
    2 marks
  42. 42

    Question 42

    Calculate the mass percentage of benzene (C6H6\text{C}_6\text{H}_6) and carbon tetrachloride (CCl4\text{CCl}_4) if 22 g of benzene is dissolved in 122 g of carbon tetrachloride.

    Medium
    2 marks
  43. 43

    Question 43

    Calculate the mole fraction of benzene in a solution containing 30% by mass in carbon tetrachloride.

    Medium
    2 marks
  44. 44

    Question 44

    Calculate the molarity of each of the following solutions:

    (a) 30 g of Co(NO3)2⋅6H2O\text{Co(NO}_3)_2 \cdot 6\text{H}_2\text{O} in 4.3 L of solution

    (b) 30 mL of 0.5 M H2SO4\text{H}_2\text{SO}_4 diluted to 500 mL.

    Medium
    2 marks
  45. 45

    Question 45

    Calculate the mass of urea (NH2CONH2\text{NH}_2\text{CONH}_2) required in making 2.5 kg of 0.25 molal aqueous solution.

    Medium
    2 marks
  46. 46

    Question 46

    Calculate (a) molality (b) molarity and (c) mole fraction of KI if the density of 20% (mass/mass) aqueous KI is 1.202 g mL−1^{-1}.

    Medium
    3 marks
  47. 47

    Question 47

    H2S\text{H}_2\text{S}, a toxic gas with rotten egg like smell, is used for qualitative analysis. If the solubility of H2S\text{H}_2\text{S} in water at STP is 0.195 m, calculate Henry's law constant.

    Medium
    2 marks
  48. 48

    Question 48

    Henry's law constant for CO2\text{CO}_2 in water is 1.67×1081.67 \times 10^8 Pa at 298 K. Calculate the quantity of CO2\text{CO}_2 in 500 mL of soda water when packed under 2.5 atm CO2\text{CO}_2 pressure at 298 K.

    Medium
    3 marks
  49. 49

    Question 49

    The vapour pressures of pure liquids A and B are 450 and 700 mm Hg respectively, at 350 K. Find out the composition of the liquid mixture if the total vapour pressure is 600 mm Hg. Also find the composition of the vapour phase.

    Medium
    3 marks
  50. 50

    Question 50

    Vapour pressure of pure water at 298 K is 23.8 mm Hg. 50 g of urea (NH2CONH2\text{NH}_2\text{CONH}_2) is dissolved in 850 g of water. Calculate the vapour pressure of water for this solution and its relative lowering.

    Medium
    2 marks
  51. 51

    Question 51

    Boiling point of water at 750 mm Hg is 99.63°C. How much sucrose is to be added to 500 g of water such that it boils at 100°C?

    Medium
    3 marks
  52. 52

    Question 52

    Calculate the mass of ascorbic acid (Vitamin C, C6H8O6\text{C}_6\text{H}_8\text{O}_6) to be dissolved in 75 g of acetic acid to lower its melting point by 1.5°C. Kf=3.9 K kg mol−1K_f = 3.9\ \text{K kg mol}^{-1}.

    Medium
    2 marks
  53. 53

    Question 53

    Calculate the osmotic pressure in pascals exerted by a solution prepared by dissolving 1.0 g of polymer of molar mass 185,000 in 450 mL of water at 37°C.

    Medium
    2 marks
Inside Ch 1

What Class 12 Chemistry Ch 1 covers

The sections of the chapter, in the order the book takes them. Every question above comes from one of these.

  1. 01Types Of Solution
  2. 02Expressing Concentration Of Solution
  3. 03Solubility
  4. 04Vapour Pressure
  5. 05Azeotropes
  6. 06Colligative Properties
From the board papers

Ch 1 in past CBSE papers

The same chapter as the board has actually asked it. These are worded differently from the textbook exercise, which is the point of reading them.

  1. 1

    Board paper question 1

    The increase in the temperature of the aqueous solution will result in its:

    MCQEasyAsked 2019
    1 mark
    Solve with AI
    Answer
    • (A) Molarity to increase

    • (B) Molarity to decrease

      Correct
    • (C) Mole fraction to increase

    • (D) Mass % to increase

    Option (B) is correct.

    Explanation: Molarity =moles of solutevolume of solution (L)= \dfrac{\text{moles of solute}}{\text{volume of solution (L)}}. On heating, the moles stay the same but the liquid expands, so the volume increases and the molarity decreases.

    Class 12 Chemistry Solutions

    Mole fraction and mass % depend only on moles and masses, which do not change on heating — so (C) and (D) are wrong, and (A) is the opposite of what happens.

  2. 2

    Board paper question 2

    Which of the following aqueous solutions will have the highest boiling point?

    MCQEasyAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) 1.0 M KCl

    • (B) 1.0 M K2SO4\text{K}_2\text{SO}_4

    • (C) 2.0 M KCl

    • (D) 2.0 M K2SO4\text{K}_2\text{SO}_4

      Correct

    Option (D) is correct.

    Explanation: Elevation of boiling point is a colligative property: ΔTb=i Kb m\Delta T_b = i\,K_b\,m. The solution with the largest number of dissolved particles (i×i \times concentration) boils highest.

    SolutionIons per formula unit (ii)i×i \times concentration
    1.0 M KCl2 (K+\text{K}^+, Cl−\text{Cl}^-)2.0
    1.0 M K2SO4\text{K}_2\text{SO}_43 (2K+2\text{K}^+, SO42−\text{SO}_4^{2-})3.0
    2.0 M KCl24.0
    2.0 M K2SO4\text{K}_2\text{SO}_436.0

    2.0 M K2SO4\text{K}_2\text{SO}_4 gives the most particles, so it has the highest boiling point.

  3. 3

    Board paper question 3

    Value of Henry's constant KHK_H is ___________.

    MCQMediumAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) Increases with increase in temperature.

      Correct
    • (B) Decreases with increase in temperature.

    • (C) Remains constant.

    • (D) First increases then decreases.

    Option (A) is correct.

    Explanation: In NCERT, Henry's law is written as

    p=KH x⇒x=pKHp = K_H\,x \qquad\Rightarrow\qquad x = \frac{p}{K_H}

    so at a fixed pressure, a larger KHK_H means a smaller mole fraction of dissolved gas, i.e. lower solubility.

    Gases become less soluble as temperature rises (dissolving a gas is exothermic). For the solubility xx to fall at the same pp, KHK_H must rise. NCERT Table 1.2 confirms it:

    GasKHK_H at 293 KKHK_H at 303 K
    N2\text{N}_276.48 kbar88.84 kbar
    O2\text{O}_234.86 kbar46.82 kbar

    Class 12 Chemistry Solutions

    Watch the convention: some books write Henry's law as C=k pC = k\,p; that kk is the reciprocal and it decreases with temperature. For CBSE, use p=KH xp = K_H\,x, and KHK_H increases with temperature.

  4. 4

    Board paper question 4

    Out of the following 1.0 M aqueous solutions, which one will show the largest freezing point depression?

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) NaCl

    • (B) Na2SO4\text{Na}_2\text{SO}_4

    • (C) C6H12O6\text{C}_6\text{H}_{12}\text{O}_6

    • (D) Al2(SO4)3\text{Al}_2(\text{SO}_4)_3

      Correct

    Option (D) is correct.

    Explanation: ΔTf=i Kf m\Delta T_f = i\,K_f\,m. At the same concentration, the solute giving the most particles (largest ii) lowers the freezing point most.

    • Glucose, C6H12O6\text{C}_6\text{H}_{12}\text{O}_6: does not dissociate → i=1i = 1
    • NaCl→Na++Cl−\text{NaCl} \rightarrow \text{Na}^+ + \text{Cl}^- → i=2i = 2
    • Na2SO4→2Na++SO42−\text{Na}_2\text{SO}_4 \rightarrow 2\text{Na}^+ + \text{SO}_4^{2-} → i=3i = 3
    • Al2(SO4)3→2Al3++3SO42−\text{Al}_2(\text{SO}_4)_3 \rightarrow 2\text{Al}^{3+} + 3\text{SO}_4^{2-} → i=5i = 5

    Class 12 Chemistry Solutions

    Al2(SO4)3\text{Al}_2(\text{SO}_4)_3 gives 5 ions per formula unit, the largest number, so it shows the largest depression.

  5. 5

    Board paper question 5

    1 mole of liquid A and 2 moles of liquid B make a solution having a total vapour pressure of 40 torr. The vapour pressures of pure A and pure B are 45 torr and 30 torr respectively. The above solution

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) is an ideal solution

    • (B) shows positive deviation

      Correct
    • (C) shows negative deviation

    • (D) is a maximum boiling azeotrope

    Option (B) is correct.

    Explanation: Mole fractions: xA=13x_A = \dfrac{1}{3}, xB=23x_B = \dfrac{2}{3}. If the solution were ideal, Raoult's law would give

    pideal=xA pA∘+xB pB∘=13(45)+23(30)=15+20=35 torrp_{\text{ideal}} = x_A\,p^\circ_A + x_B\,p^\circ_B = \frac{1}{3}(45) + \frac{2}{3}(30) = 15 + 20 = 35\ \text{torr}

    The observed value, 40 torr, is higher than 35 torr, so the solution shows positive deviation: A–B attractions are weaker than A–A and B–B attractions, and molecules escape more easily.

    Class 12 Chemistry Solutions

    (A) would need exactly 35 torr. (C) and (D) both need a vapour pressure lower than ideal.

  6. 6

    Board paper question 6

    If the molality of a dilute solution is doubled, the value of the molal elevation constant (KbK_b) will be:

    MCQHardAsked 2023
    1 mark
    Solve with AI
    Answer
    • (A) halved

    • (B) doubled

    • (C) tripled

    • (D) unchanged

      Correct

    Option (D) is correct.

    Explanation: In ΔTb=Kb m\Delta T_b = K_b\,m, doubling the molality doubles ΔTb\Delta T_b — not KbK_b. The molal elevation constant is a property of the solvent alone:

    Kb=R M1 Tb21000 ΔvapHK_b = \frac{R\,M_1\,T_b^2}{1000\,\Delta_{\text{vap}}H}

    It depends on the solvent's molar mass, boiling point and enthalpy of vaporisation — none of which change when more solute is added. For water, Kb=0.52 K kg mol−1K_b = 0.52\ \text{K kg mol}^{-1} at every (dilute) concentration.

    Class 12 Chemistry Solutions

All 37 board paper questions for this chapter, solved the same way.

Common questions

Class 12 Chemistry Ch 1 questions students ask

How many questions are there in Class 12 Chemistry Ch 1?

53 questions. Every one is solved step by step on this page.

Are these Class 12 Chemistry solutions free?

Yes. Every question and its full working is free to read, with no account needed.

Can I download the Class 12 Chemistry Ch 1 solutions as a PDF?

There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.