On cooling, the wire tries to contract by
Δl=lαl∣ΔT∣,∣ΔT∣=27−(−39)=66 K
The rigid supports do not let it contract, so the wire is stretched by exactly this amount compared with the length it would naturally have. The tensile strain in the wire is therefore
strain=lΔl=αl∣ΔT∣
and the tension follows from Young's modulus, F/A=Y×strain:
F=YAαl∣ΔT∣
Area of cross-section (r=1.0 mm=1.0×10−3 m):
A=πr2=π×(1.0×10−3)2=3.14×10−6 m2
F=0.91×1011×3.14×10−6×2.0×10−5×66
F=3.8×102 N
The tension developed in the wire is about 3.8×102 N (377 N). Note that the length of the wire does not enter the answer: the strain depends only on αl and ΔT.