This exercise uses an idea that is developed later, in Chapter 12 (the energy of a gas molecule shared among its different kinds of motion). The standard explanation is:
Why these gases have a larger molar specific heat. All the gases in the table are diatomic. The molecule of a monatomic gas can only move from place to place (translation in three independent directions, 3 degrees of freedom). Its molar specific heat at constant volume is about
Cv=23R=23×1.985=2.98 cal mol−1 K−1
using R=8.31 J mol−1 K−1=4.1868.31=1.985 cal mol−1 K−1. This agrees with the typical value 2.92 quoted.
A diatomic molecule can also rotate, about two axes perpendicular to the line joining its atoms, so it has 5 degrees of freedom (3 translational + 2 rotational). When the gas is heated, energy must go into rotation as well as translation, so more heat is needed per kelvin:
Cv=25R=25×1.985=4.96 cal mol−1 K−1
This is very close to the measured values for hydrogen, nitrogen, oxygen, nitric oxide and carbon monoxide (4.87 to 5.02).
Chlorine. Its value, 6.17 cal mol−1 K−1, is clearly larger than 25R. This shows that at room temperature the chlorine molecule also takes up energy in vibration of its two atoms along the bond, in addition to translation and rotation. For the other gases vibration is not significantly excited at room temperature, but in the heavier, more loosely bound chlorine molecule it is, so chlorine needs extra heat for each kelvin rise.