Opening your dashboard
Class 11 Chemistry Chapter 5: Thermodynamics Solutions
22 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 5, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
22 questions with solutions
1–3 marks · Mixed difficulty
- 11 mark
Question 1
Choose the correct answer. A thermodynamic state function is a quantity
Solve with AIAnswer
(A) used to determine heat changes
- Correct
(B) whose value is independent of path
(C) used to determine pressure volume work
(D) whose value depends on temperature only.
Option (B) is correct.
Explanation: A state function (such as , , , , , , ) depends only on the present state of the system, fixed by its state variables. Its change between two states, for example , is the same whichever path is followed between those states.
- (A) is wrong: heat is itself path dependent, so it is not a state function; "determining heat changes" is not what defines one.
- (C) is wrong: pressure–volume work depends on the path (free, irreversible or reversible expansion give different ), so work is not a state function.
- (D) is wrong: a state function depends on all the state variables (for a gas , , , ), not on temperature alone.
- 21 mark
Question 2
For the process to occur under adiabatic conditions, the correct condition is:
Solve with AIAnswer
(A)
(B)
- Correct
(C)
(D)
Option (C) is correct.
Explanation: In an adiabatic process there is no transfer of heat between the system and the surroundings, because the wall separating them is an insulator (adiabatic wall). Hence , and the first law becomes .
- (A) is wrong: defines an isothermal process; in an adiabatic process the temperature generally changes (a gas cools on adiabatic expansion).
- (B) is wrong: defines an isobaric (constant-pressure) process.
- (D) is wrong: work can be done in an adiabatic process; it is heat that is zero, so , not zero work.
- 31 mark
Question 3
The enthalpies of all elements in their standard states are:
Solve with AIAnswer
(A) unity
- Correct
(B) zero
(C) < 0
(D) different for each element
Option (B) is correct.
Explanation: Absolute enthalpies cannot be measured, so a reference is chosen by convention: the standard enthalpy of formation, , of every element in its standard state (its most stable form at 1 bar and the stated temperature, e.g. C(graphite), (g), (l)) is taken as zero. Forming an element from itself involves no change, so .
- (A) is wrong: enthalpy has units of energy (kJ mol⁻¹); a dimensionless value of one has no meaning here.
- (C) is wrong: a negative value would imply energy is released in forming an element from itself, which is impossible by definition.
- (D) is wrong: the convention assigns the same value, zero, to every element in its standard state; only compounds have element-specific non-zero values.
- 41 mark
Question 4
of combustion of methane is . The value of is
Solve with AIAnswer
(A)
(B)
- Correct
(C)
(D)
Option (C) is correct.
Explanation: Combustion of methane at 298 K (water is a liquid):
Moles of gas: products 1, reactants 3, so .
Since is positive, is smaller (more negative) than : , so .
- (A) is wrong: only when ; that is what you get by wrongly counting the water as a gas ().
- (B) is wrong: this would need ; it comes from taking reactants minus products () instead of products minus reactants.
- (D) is wrong: combustion of methane is strongly exothermic, so is large and negative, not zero.
- 51 mark
Question 5
The enthalpy of combustion of methane, graphite and dihydrogen at 298 K are, , , and respectively. Enthalpy of formation of (g) will be
Solve with AIAnswer
- Correct
(A)
(B)
(C)
(D)
Option (A) is correct.
Explanation: Target (formation) equation:
Combustion data:
(i) ;
(ii) ;
(iii) ;
By Hess's law, target = (ii) + 2 × (iii) − (i):
- (B) is wrong: does not follow from any correct combination of the three combustion enthalpies.
- (C) is wrong: has the right size but the wrong sign; it comes from subtracting the other way, (the reverse reaction, decomposition of methane).
- (D) is wrong: is neither the right size nor the right sign.
- 61 mark
Question 6
A reaction, A + B C + D + q is found to have a positive entropy change. The reaction will be
Solve with AIAnswer
(A) possible at high temperature
(B) possible only at low temperature
(C) not possible at any temperature
- Correct
(D) possible at any temperature
Option (D) is correct.
Explanation: "+ q" on the product side means heat is released, so the reaction is exothermic: . We are told . In
is negative and is also negative (since and ). Both terms are negative, so at every temperature, and the reaction is spontaneous at any temperature.
- (A) is wrong: "possible at high temperature" describes , , where must exceed ; here is negative at low temperature too.
- (B) is wrong: "only at low temperature" describes , .
- (C) is wrong: "never possible" describes , , the exact opposite of this case.
- 72 marks
Question 7
In a process, 701 J of heat is absorbed by a system and 394 J of work is done by the system. What is the change in internal energy for the process?
Solve with AIWritten solution
Given (IUPAC sign convention):
- Heat absorbed by the system: (energy enters the system)
- Work done by the system on the surroundings: (energy leaves the system)
First law of thermodynamics:
The internal energy of the system increases by 307 J: the system absorbs more energy as heat than it gives out as work.
- 83 marks
Question 8
The reaction of cyanamide, (s), with dioxygen was carried out in a bomb calorimeter, and was found to be at 298 K. Calculate enthalpy change for the reaction at 298 K.
Solve with AIWritten solution
A bomb calorimeter works at constant volume, so the heat measured is . The enthalpy change at constant pressure is found from
Given: , , .
Change in moles of gas. Cyanamide is a solid and water is a liquid at 298 K, so only , and count:
Substitution:
The enthalpy change is . Because the number of gas moles increases, the system does some expansion work at constant pressure, so is slightly less negative than . (The book's equation prints as (g); the stem states it is a solid, and treating it as solid gives the book's answer.)
- 93 marks
Question 9
Calculate the number of kJ of heat necessary to raise the temperature of 60.0 g of aluminium from 35°C to 55°C. Molar heat capacity of Al is .
Solve with AIWritten solution
Given: , molar mass of Al , , (a temperature difference is the same in °C and K).
Amount of aluminium:
Heat required:
About 1.07 kJ of heat is needed (1.1 kJ to the two significant figures of the heat capacity).
- 103 marks
Question 10
Calculate the enthalpy change on freezing of 1.0 mol of water at 10.0°C to ice at −10.0°C. at 0°C.
Solve with AIWritten solution
Enthalpy is a state function, so the change from water at 10.0 °C to ice at −10.0 °C can be calculated along any convenient path. Take three steps (each for ):
(i) Cool the liquid from 10.0 °C to 0 °C ():
(ii) Freeze the water at 0 °C. Freezing is the reverse of fusion, so its enthalpy change is :
(iii) Cool the ice from 0 °C to −10.0 °C ():

Total:
The enthalpy change is for 1.0 mol (i.e. ). It is negative because heat is given out in every step; the phase change contributes most of it.
- 112 marks
Question 11
Enthalpy of combustion of carbon to is . Calculate the heat released upon formation of 35.2 g of from carbon and dioxygen gas.
Solve with AIWritten solution
Equation: ; , i.e. 393.5 kJ is released per mole of formed.
Moles of CO₂: molar mass
Heat released:
314.8 kJ of heat is released (the enthalpy change for forming 35.2 g of CO₂ is −314.8 kJ).
- 123 marks
Question 12
Enthalpies of formation of CO(g), (g), (g) and (g) are −110, −393, 81 and 9.7 kJ mol⁻¹ respectively. Find the value of for the reaction:
Solve with AIWritten solution
Formula:
Products:
Reactants:
Result:
; the reaction is exothermic.
- 132 marks
Question 13
Given
What is the standard enthalpy of formation of gas?
Solve with AIWritten solution
The standard enthalpy of formation is the enthalpy change when one mole of a compound is formed from its elements in their standard states. The given equation forms two moles of , so the formation equation is half of it:
Halving the equation halves the enthalpy change:
The standard enthalpy of formation of ammonia gas is .
- 143 marks
Question 14
Calculate the standard enthalpy of formation of (l) from the following data:
Solve with AIWritten solution
Target (formation) equation:
Label the data equations (i), (ii), (iii) in the order given. Arrange them so that they add up to the target:
- keep (ii): ;
- take 2 × (iii): ;
- reverse (i): ;
On adding, and cancel, and on the left minus on the right leaves on the left, which is exactly the target. By Hess's law:
The standard enthalpy of formation of liquid methanol is .
- 153 marks
Question 15
Calculate the enthalpy change for the process
and calculate bond enthalpy of C – Cl in (g).
, where is enthalpy of atomisation
Solve with AIWritten solution
Reading the data. is a liquid in its standard state, so refers to (l); that is why the enthalpy of vaporisation is given. is for .
(a) Enthalpy of formation of gaseous CCl₄.
(b) Atomising the elements. Forming C(g) + 4Cl(g) from C(graphite) + 2Cl₂(g):
(c) Hess's law. Going from (g) back to the elements (reverse of formation, +105.0 kJ) and then atomising the elements (+1199.0 kJ) gives the required process:

(d) C–Cl bond enthalpy. The process breaks four equivalent C–Cl bonds, so the mean bond enthalpy is
has , and the C–Cl bond enthalpy in (g) is 326 kJ mol⁻¹.
- 162 marks
Question 16
For an isolated system, , what will be ?
Solve with AIWritten solution
An isolated system exchanges neither energy nor matter with its surroundings, so and energy cannot be the driving force for any change inside it. Changes in an isolated system are driven by entropy.
For an isolated system the total entropy change is the system's entropy change, and for a spontaneous process it must increase:
Examples are the diffusion of two gases into each other in an insulated closed container, or the expansion of a gas into a vacuum: , yet the change happens on its own because the randomness of the system increases.
When the isolated system reaches equilibrium its entropy is at a maximum and no further change occurs, so .
So for an isolated system with : for a spontaneous change ( only at equilibrium).
- 172 marks
Question 17
For the reaction at 298 K,
and
At what temperature will the reaction become spontaneous considering and to be constant over the temperature range.
Solve with AIWritten solution
A reaction is spontaneous when .
Here both and are positive, so is positive at low temperature and becomes negative only when exceeds . The crossover is where :
At 298 K, , so the reaction is not spontaneous. It is at equilibrium at 2000 K and becomes spontaneous above 2000 K.
- 182 marks
Question 18
For the reaction,
what are the signs of and ?
Solve with AIWritten solution
Sign of ΔH: negative. Two free chlorine atoms join to form a Cl–Cl bond. Bond formation always releases energy (it is the reverse of bond dissociation, which needs 242 kJ mol⁻¹ for ), so the process is exothermic and .
Sign of ΔS: negative. Two moles of gaseous atoms become one mole of gaseous molecules. Fewer independent particles move about freely, so the randomness of the system decreases and .
Both and are negative.
- 193 marks
Question 19
For the reaction
and .
Calculate for the reaction, and predict whether the reaction may occur spontaneously.
Solve with AIWritten solution
Given: , ; standard values are usually quoted at 298 K, so take ; .
(a) Convert ΔU° to ΔH°. All species are gases: .
(b) Gibbs energy change.
(164 J). Since is positive, the reaction will not occur spontaneously under standard conditions at 298 K: the favourable enthalpy change is just outweighed by the decrease in entropy.
- 202 marks
Question 20
The equilibrium constant for a reaction is 10. What will be the value of ? , .
Solve with AIWritten solution
Relation between ΔG° and K:
Substitution: , so .
. A negative is consistent with : at equilibrium, products are favoured over reactants.
- 212 marks
Question 21
Comment on the thermodynamic stability of NO(g), given
Solve with AIWritten solution
(a) NO relative to its elements. The first equation is the formation of NO, so . Heat is absorbed, so NO lies 90 kJ mol⁻¹ above in enthalpy. A compound with a positive enthalpy of formation is thermodynamically unstable with respect to its elements: its decomposition to N₂ and O₂ is exothermic.
(b) NO relative to NO₂. The second reaction is exothermic (), so NO tends to be oxidised to NO₂ in air. Adding the two equations gives the formation of NO₂:
NO₂ is also endothermic, but far less so than NO.
Conclusion: NO(g) is thermodynamically unstable: it is higher in enthalpy than both its elements and NO₂, and it is converted into the more stable NO₂ (which is itself still slightly endothermic).
- 222 marks
Question 22
Calculate the entropy change in surroundings when 1.00 mol of (l) is formed under standard conditions. .
Solve with AIWritten solution
Given: , , standard values are usually quoted at 298 K, so take .
The reaction releases 286 kJ, and this heat is absorbed by the surroundings at constant pressure: .
The entropy of the surroundings increases by 959.7 J K⁻¹ mol⁻¹ (about 960 J K⁻¹ mol⁻¹), because the heat released by the exothermic reaction makes the surroundings more random.
What Class 11 Chemistry Ch 5 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01Thermodynamics Terms & Processes
- 02Internal Energy
- 03Enthalpy And Heat Capacity
- 04Different Types Of Enthalpy
- 05Spontaneity, Entropy, Gibb's Energy
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 5 before.
Class 11 Chemistry Ch 5 questions students ask
How many questions are there in Class 11 Chemistry Ch 5?
22 questions. Every one is solved step by step on this page.
Are these Class 11 Chemistry solutions free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 11 Chemistry Ch 5 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
