Opening your dashboard
Class 11 Biology Chapter 9: Biomolecules Solutions
11 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.
Get talked through Ch 9, not just shown the answer
Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.
- Ask it out loud, in your own words
- It gives you the next step, not the answer
- Stuck on part (ii)? Start there
11 questions with solutions
2–5 marks · Easy difficulty
- 12 marks
Question 1
What are macromolecules? Give examples.
Solve with AIWritten solution
Macromolecules (biomacromolecules) are the compounds found in the acid-insoluble fraction when a living tissue is ground in trichloroacetic acid. Except for lipids, they have molecular weights in the range of ten thousand daltons and above, and they are polymeric substances made of smaller building blocks.
Examples:
- Proteins: polymers of amino acids (heteropolymers of 20 types of amino acids), for example collagen, insulin and trypsin.
- Nucleic acids: polymers of nucleotides (polynucleotides), namely DNA and RNA.
- Polysaccharides: long chains of sugars, for example cellulose, starch and glycogen (all made of glucose) and inulin (made of fructose).
Lipids also separate with this fraction, because cell membranes break into water-insoluble vesicles on grinding, but their molecular weights do not exceed 800 Da and they are not polymers. So lipids are not strictly macromolecules.
- 22 marks
Question 2
What is meant by the tertiary structure of proteins?
Solve with AIWritten solution
In the tertiary structure, the long protein chain is folded upon itself like a hollow woollen ball. This gives a three-dimensional view of the protein.
- Tertiary structure is absolutely necessary for the many biological activities of proteins.
- In an enzyme, the folded chain criss-crosses itself and forms many crevices or pockets; one such pocket is the active site, into which the substrate fits.
- Figure 9.3 c labels hydrogen bonds and disulphide bonds in the folded chain.
- Conditions such as high temperature and a change in pH can alter the tertiary structure; heat denatures proteins, and an enzyme then loses its activity.
- 35 marks
Question 3
Find and write down the structures of 10 interesting small molecular weight biomolecules. Find out if there is any industry which manufactures the compounds by isolation. Find out who the buyers are.
Solve with AIWritten solution
(1) Ten small molecular weight biomolecules (molecular weight less than 1000 Da), all from Figure 9.1:
Biomolecule Class Formula or key feature Glucose Sugar C₆H₁₂O₆; six-membered ring with a CH₂OH group Ribose Sugar C₅H₁₀O₅; five-membered ring (a pentose) Glycine Amino acid R group is hydrogen Alanine Amino acid R group is methyl (–CH₃) Serine Amino acid R group is hydroxy methyl (–CH₂OH) Palmitic acid Fatty acid CH₃(CH₂)₁₄COOH; 16 carbons including the carboxyl carbon Glycerol Lipid Trihydroxy propane, CH₂OH–CHOH–CH₂OH Cholesterol Lipid Shown among the lipids (fats and oils) in Figure 9.1 Adenine Nitrogen base A purine Uracil Nitrogen base A pyrimidine 
(2) Industries that obtain such compounds by isolation from living material:
- Pharmaceutical industry: alkaloids such as morphine and codeine, and drugs such as vinblastin and curcumin, are isolated from plants.
- Essential-oil and perfume industry: oils such as lemon grass oil, and scents.
- Spice and food-colour industry: curcumin and plant pigments such as carotenoids and anthocyanins.
- Oil and fat processing industry: glycerol and fatty acids (such as palmitic acid) obtained from plant oils and animal fats.
(3) Buyers: pharmaceutical companies, food and beverage manufacturers, cosmetic and perfume manufacturers, research laboratories and educational institutes, and other industries that use these biomolecules as raw material for making other products.
- 45 marks
Question 4
Find out and make a list of proteins used as therapeutic agents. Find other applications of proteins (e.g., cosmetics, etc.).
Solve with AIWritten solution
Proteins used as therapeutic agents:
Protein Therapeutic use Insulin A hormone (Table 9.5); given to people with diabetes to control the blood glucose level Antibodies Fight infectious agents (Table 9.5); antibody preparations such as anti-venom and anti-tetanus sera are given to neutralise snake venom and tetanus toxin Thrombin and fibrinogen Blood-clotting proteins; used to stop bleeding, for example as sealants on wounds and during surgery Enzymes Some enzymes are used as medicines, for example digestive enzyme preparations given to people who cannot digest food properly Other applications of proteins:
- Cosmetics: collagen and other proteins are added to creams, lotions and shampoos.
- Food industry: gelatin, obtained from collagen, is used in jellies and desserts; proteins are also used as food supplements.
- Detergents: protein-digesting enzymes are added to washing powders to remove stains.
- Research and diagnosis: antibodies and enzymes are used in laboratory tests and diagnostic kits.
- 53 marks
Question 5
Explain the composition of triglycerides.
Solve with AIWritten solution
A triglyceride is a lipid made of glycerol and fatty acids.
- Glycerol is a simple lipid; it is trihydroxy propane (CH₂OH–CHOH–CH₂OH), with three –OH positions.
- Fatty acids each have a carboxyl group attached to an R group. They may be saturated (no double bond) or unsaturated (one or more C=C double bonds); palmitic acid, CH₃(CH₂)₁₄COOH, is an example.
- In a glyceride, the fatty acids are found esterified with glycerol. With one fatty acid the lipid is a monoglyceride, with two a diglyceride, and with three a triglyceride. In Figure 9.1, the three fatty acids of a triglyceride are shown as R₁, R₂ and R₃; they may be the same or different.

Glycerides are also called fats and oils, based on their melting point. Oils have a lower melting point (for example, gingelly oil) and hence remain as oil in winters.
- 63 marks
Question 6
Can you attempt building models of biomolecules using commercially available atomic models (ball and stick models)?
Solve with AIWritten solution
Yes. Ball and stick kits let us build three-dimensional models of small biomolecules.
The kit: each ball is an atom and each stick is a bond. The balls are colour-coded; in most kits carbon is black, hydrogen is white, oxygen is red and nitrogen is blue. Each ball has holes for the number of bonds the atom forms: carbon 4, nitrogen 3, oxygen 2 and hydrogen 1. A double bond is shown by joining two atoms with two sticks.
Building alanine:
- Take a black ball for the α-carbon and attach four sticks to it.
- To the four sticks attach: a hydrogen (white); an amino group, –NH₂ (blue N with two white H); a carboxyl group, –COOH (black C joined to one red O by two sticks and to another red O that carries a white H); and the R group, a methyl group –CH₃ (black C with three white H).
- The model shows why an amino acid is called a substituted methane: four different groups occupy the four valency positions of one carbon.

More models: replace the methyl group with a single hydrogen to get glycine, or with –CH₂OH to get serine. Glucose (C₆H₁₂O₆) can be built as a six-membered ring of five carbons and one oxygen, with a CH₂OH group outside the ring.
- 72 marks
Question 7
Draw the structure of the amino acid, alanine.
Solve with AIWritten solution
Alanine is an α-amino acid in which the R group is a methyl group (–CH₃). Its α-carbon carries four groups: a hydrogen (–H), a carboxyl group (–COOH), an amino group (–NH₂) and the methyl group. Its formula can be written as H₂N–CH(CH₃)–COOH.

In the structure, the carboxyl group is drawn above the α-carbon, the hydrogen to its left, the amino group to its right and the R group (methyl) below, as in Figure 9.1.
- 82 marks
Question 8
What are gums made of? Is Fevicol different?
Solve with AIWritten solution
Gums are plant products. Table 9.3 lists them among secondary metabolites, as polymeric substances along with rubber and cellulose. Gums are polysaccharides, that is, long chains of sugar units (monosaccharides).
Fevicol is different. It is a synthetic adhesive made in factories from polyvinyl acetate, a man-made polymer. It is not made of sugar units and is not produced by any living organism, so it is not a biomolecule.
- 95 marks
Question 9
Find out a qualitative test for proteins, fats and oils, and amino acids, and test any fruit juice, saliva, sweat and urine for them.
Solve with AIWritten solution
Qualitative tests:
Test for Name of the test Procedure Positive result Proteins Biuret test To 2 mL of the sample add 2 mL of dilute sodium hydroxide and a few drops of dilute copper sulphate solution; shake Violet or purple colour Amino acids Ninhydrin test Add a few drops of ninhydrin solution to the sample and heat in a boiling water bath for a few minutes Purple or blue colour Fats and oils Grease-spot (translucent spot) test Put a drop of the sample on a piece of paper and let it dry A translucent spot that does not disappear on drying Results usually observed:
Sample Proteins (Biuret) Amino acids (ninhydrin) Fats and oils (grease spot) Fruit juice Usually negative or very weak Often weakly positive Usually negative Saliva Positive (saliva contains proteins, including enzymes) Usually weak Usually negative Sweat Usually negative Often weakly positive Usually negative or a faint spot Urine (healthy person) Negative; a positive test suggests a medical problem May be faintly positive Negative Results can vary with the sample, so each test should be done alongside a control (water) and a known positive sample, such as egg white for proteins and oil for the grease-spot test.
- 103 marks
Question 10
Find out how much cellulose is made by all the plants in the biosphere and compare it with how much paper is manufactured by man, and hence what is the consumption of plant material by man annually. What a loss of vegetation!
Solve with AIWritten solution
Cellulose made by plants: Plant cell walls are made of cellulose. Estimates vary widely, but all the plants of the biosphere together are thought to make at least about 10¹¹ tonnes (100 billion tonnes) of cellulose every year (approximate).
Paper made by man: Paper made from plant pulp and cotton fibre is cellulosic. World paper production is roughly 0.4 billion tonnes a year (approximate).
Comparison: Even on the lower cellulose estimate, 0.4 billion ÷ 100 billion ≈ 0.004, so paper uses less than about half a per cent of the cellulose made each year. The share looks small, but most paper comes from trees cut for wood pulp, and whole forests are cleared for it. Besides paper, people also use plant material as timber, fuel, cotton cloth and food, so the total annual consumption of plant material by man is far larger than the paper figure alone.
Conclusion: The loss of vegetation, especially of forests, is large. It can be reduced by recycling paper, using less paper and planting trees.
- 115 marks
Question 11
Describe the important properties of enzymes.
Solve with AIWritten solution
- Nature: Almost all enzymes are proteins; some nucleic acids, called ribozymes, also behave like enzymes. Like any protein, an enzyme has primary, secondary and tertiary structure.
- Active site: In the tertiary structure the chain criss-crosses itself and forms crevices or pockets. One such pocket is the active site, into which the substrate fits.
- High rate of catalysis: Enzymes catalyse reactions at very high rates. Carbonic anhydrase speeds up the formation of H₂CO₃ about 10 million times.
- Specificity: Each enzyme catalyses a unique chemical or metabolic reaction; proteinaceous enzymes show substrate specificity.
- ES complex and activation energy: The substrate forms an obligatory, transient enzyme-substrate (ES) complex, passes through a transition state, and is released as product. Enzymes bring down the activation energy, making the change from substrate to product easier.
- Unchanged at the end: The ES complex dissociates into the product and the unchanged enzyme (E + S ⇌ ES → EP → E + P), and the free enzyme can bind another substrate molecule.
- Temperature and pH: Enzymes function in a narrow range of temperature and pH, with highest activity at the optimum temperature and optimum pH. Low temperature keeps them temporarily inactive; high temperature denatures them (most are damaged above about 40°C, though enzymes from thermophilic organisms stay stable up to 80°–90°C).
- Substrate concentration: Velocity rises with substrate concentration at first and then reaches a maximum velocity (Vmax), because the enzyme molecules become saturated.
- Inhibition: Enzyme activity can be shut off by specific chemicals (inhibitors); for example, malonate competitively inhibits succinic dehydrogenase.
- Co-factors: Many enzymes need non-protein co-factors (prosthetic groups, co-enzymes or metal ions) to be catalytically active.
What Class 11 Biology Ch 9 covers
The sections of the chapter, in the order the book takes them. Every question above comes from one of these.
- 01Chemical Composition Of Living Organisms
- 02Primary And Secondary Metabolites
- 03Biomacromolecules
- 04Proteins
- 05Polysaccharides
- 06Nucleic Acids
- 07Structure Of Proteins
More ways to study this chapter
The same chapter asked three other ways. Practise it, revise it, and see what the board has set on Ch 9 before.
Class 11 Biology Ch 9 questions students ask
How many questions are there in Class 11 Biology Ch 9?
11 questions. Every one is solved step by step on this page.
Are these Class 11 Biology solutions free?
Yes. Every question and its full working is free to read, with no account needed.
Can I download the Class 11 Biology Ch 9 solutions as a PDF?
There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.
