Confirming your payment

Skip to content

Opening your dashboard

Class 11 Biology Chapter 5: Morphology Of Flowering Plants Solutions

10 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.

AI Tutor

Get talked through Ch 5, not just shown the answer

Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.

  • Ask it out loud, in your own words
  • It gives you the next step, not the answer
  • Stuck on part (ii)? Start there
Ch 5 solutions

10 questions with solutions

2–7 marks · Easy difficulty

  1. 1

    Question 1

    How is a pinnately compound leaf different from a palmately compound leaf?

    Easy
    2 marks
    Solve with AI
    Written solution

    In a compound leaf, the incisions of the lamina reach up to the midrib and break it into a number of leaflets. The two types of compound leaf differ as follows.

    Pinnately compound leafPalmately compound leaf
    A number of leaflets are present on a common axis, the rachis.The leaflets are attached at a common point, that is, at the tip of the petiole.
    The rachis represents the midrib of the leaf.There is no rachis.
    Example: neem.Example: silk cotton.

    Class 11 Biology Morphology Of Flowering Plants

    In both types, a bud is present in the axil of the petiole, but not in the axil of the leaflets.

  2. 2

    Question 2

    Explain with suitable examples the different types of phyllotaxy.

    Easy
    3 marks
    Solve with AI
    Written solution

    Phyllotaxy is the pattern of arrangement of leaves on the stem or branch. It is usually of three types.

    (a) Alternate: A single leaf arises at each node in an alternate manner. Examples: china rose, mustard and sunflower.

    (b) Opposite: A pair of leaves arises at each node, and the two leaves lie opposite to each other. Examples: Calotropis and guava.

    (c) Whorled: More than two leaves arise at a node and form a whorl. Example: Alstonia.

  3. 3

    Question 3

    Define the following terms:

    (a) aestivation

    (b) placentation

    (c) actinomorphic

    (d) zygomorphic

    (e) superior ovary

    (f) perigynous flower

    (g) epipetalous stamen

    Easy
    7 marks
    Solve with AI
    Written solution

    (a) Aestivation: The mode of arrangement of sepals or petals in the floral bud with respect to the other members of the same whorl is called aestivation. Its main types are valvate, twisted, imbricate and vexillary.

    (b) Placentation: The arrangement of ovules within the ovary is called placentation. The book names marginal, axile, parietal, basal, central and free central placentation.

    (c) Actinomorphic: A flower that can be divided into two equal radial halves in any radial plane passing through the centre is actinomorphic (radial symmetry). Examples: mustard, datura and chilli.

    (d) Zygomorphic: A flower that can be divided into two similar halves only in one particular vertical plane is zygomorphic (bilateral symmetry). Examples: pea, gulmohur, bean and Cassia.

    (e) Superior ovary: In a hypogynous flower, the gynoecium occupies the highest position on the thalamus and the other parts are situated below it. Such an ovary is called superior. Examples: mustard, china rose and brinjal.

    (f) Perigynous flower: A flower in which the gynoecium is situated in the centre and the other parts are located on the rim of the thalamus almost at the same level is perigynous. The ovary is half inferior. Examples: plum, rose and peach.

    (g) Epipetalous stamen: A stamen that is attached to the petals is epipetalous. Example: brinjal.

  4. 4

    Question 4

    Differentiate between:

    (a) Racemose and cymose inflorescence

    (b) Apocarpous and syncarpous ovary

    Easy
    2 marks
    Solve with AI
    Written solution

    (a) Racemose and cymose inflorescence: The two types differ in whether the apex of the main axis continues to grow or develops into a flower.

    Racemose inflorescenceCymose inflorescence
    The main axis continues to grow.The main axis terminates in a flower, so it is limited in growth.
    Flowers are borne laterally in an acropetal succession, so the youngest flowers are towards the apex.Flowers are borne in a basipetal order, so the oldest flower is at the top.

    (b) Apocarpous and syncarpous ovary: Both terms apply when a gynoecium has more than one carpel.

    ApocarpousSyncarpous
    The carpels are free.The carpels are fused.
    Examples: lotus and rose.Examples: mustard and tomato.
  5. 5

    Question 5

    Draw the labelled diagram of the following:

    (i) gram seed

    (ii) V.S. of maize seed

    Easy
    2 marks
    Solve with AI
    Written solution

    (i) Gram seed: Gram is a dicotyledonous, non-endospermous seed.

    Class 11 Biology Morphology Of Flowering Plants

    Labels: seed coat, hilum, micropyle, cotyledon, plumule, radicle. The seed coat has an outer testa and an inner tegmen. The hilum is the scar through which the developing seed was attached to the fruit, and the micropyle is a small pore just above the hilum. Inside, the embryo has an embryonal axis and two fleshy cotyledons full of reserve food, with the radicle and plumule at the two ends of the axis.

    (ii) V.S. of maize seed: Maize is a monocotyledonous, endospermic seed.

    Class 11 Biology Morphology Of Flowering Plants

    Labels: seed coat and fruit-wall, aleurone layer, endosperm, embryo, scutellum, coleoptile, plumule, radicle, coleorhiza. The membranous seed coat is fused with the fruit wall. The bulky endosperm stores food; its outer covering is a proteinous layer, the aleurone layer. The small embryo lies in a groove at one end of the endosperm; it has one shield-shaped cotyledon, the scutellum, and a short axis whose plumule and radicle are enclosed in the coleoptile and coleorhiza respectively.

  6. 6

    Question 6

    Take one flower of the family Solanaceae and write its semi-technical description. Also draw its floral diagram.

    Easy
    5 marks
    Solve with AI
    Written solution

    Plant: Solanum nigrum (makoi), family Solanaceae, the potato family. The description follows the book's sequence: habit, vegetative characters, floral characters, then the floral diagram and floral formula.

    Vegetative characters

    • Habit: plants of the family are mostly herbs, shrubs and rarely small trees.

    • Stem: herbaceous, rarely woody, aerial; erect, cylindrical, branched, solid or hollow, hairy or glabrous. (In potato, Solanum tuberosum, there is an underground stem.)

    • Leaves: alternate, simple, rarely pinnately compound, exstipulate; venation reticulate.

    Floral characters

    • Inflorescence: solitary, axillary or cymose as in Solanum.

    • Flower: bisexual, actinomorphic.

    • Calyx: sepals five, united, persistent; valvate aestivation.

    • Corolla: petals five, united; valvate aestivation.

    • Androecium: stamens five, epipetalous.

    • Gynoecium: bicarpellary, with the carpels obliquely placed; syncarpous; ovary superior, bilocular; placenta swollen with many ovules; axile placentation.

    • Fruits: berry or capsule.

    • Seeds: many, endospermous.

    Floral formula: ⊕ ⚥ K(5) C(5) A5‾ G‾(2)K_{(5)}\ \overline{C_{(5)}\ A_{5}}\ \underline{G}_{(2)}

    Here ⊕ shows the flower is actinomorphic and ⚥ that it is bisexual; the brackets show that the five sepals, the five petals and the two carpels are united; the line above C and A shows that the stamens are attached to the petals (epipetalous); and the line below G shows that the ovary is superior.

    Floral diagram:

    Class 11 Biology Morphology Of Flowering Plants

    The dot at the top marks the position of the mother axis. From outside inward, the diagram shows five united sepals, five united petals, five stamens attached to the petals and alternating with them, and in the centre a bilocular ovary, its septum drawn slanting because the two carpels are obliquely placed, whose swollen axile placentae bear many ovules.

    Economic importance of the family: food (tomato, brinjal, potato), spice (chilli), medicine (belladonna, ashwagandha), fumigatory (tobacco) and ornamentals (petunia).

  7. 7

    Question 7

    Describe the various types of placentations found in flowering plants.

    Easy
    5 marks
    Solve with AI
    Written solution

    The arrangement of ovules within the ovary is known as placentation. The ovules are attached to a flattened, cushion-like placenta. The book names marginal, axile, parietal, basal, central and free central placentation; five of them are described below.

    Class 11 Biology Morphology Of Flowering Plants

    (a) Marginal: The placenta forms a ridge along the ventral suture of the ovary, and the ovules are borne on this ridge, forming two rows. Example: pea.

    (b) Axile: The placenta is axial, and the ovules are attached to it in a multilocular ovary. Examples: china rose, tomato and lemon.

    (c) Parietal: The ovules develop on the inner wall of the ovary or on its peripheral part. The ovary is one-chambered, but it becomes two-chambered due to the formation of a false septum. Examples: mustard and Argemone.

    (d) Free central: The ovules are borne on a central axis, and septa are absent. Examples: Dianthus and Primrose.

    (e) Basal: The placenta develops at the base of the ovary, and a single ovule is attached to it. Examples: sunflower and marigold.

  8. 8

    Question 8

    What is a flower? Describe the parts of a typical angiosperm flower.

    Easy
    5 marks
    Solve with AI
    Written solution

    Flower: The flower is the reproductive unit in the angiosperms and is meant for sexual reproduction. It is a modified shoot, in which the shoot apical meristem changes to a floral meristem, the internodes do not elongate and the axis gets condensed. A typical flower has four whorls arranged successively on the swollen end of the stalk or pedicel, called the thalamus or receptacle.

    Class 11 Biology Morphology Of Flowering Plants

    Parts of a typical flower:

    (a) Calyx: The outermost whorl; its members are sepals. Sepals are generally green and leaf-like and protect the flower in the bud stage. The calyx may be gamosepalous (sepals united) or polysepalous (sepals free).

    (b) Corolla: Made of petals, which are usually brightly coloured to attract insects for pollination. It may be gamopetalous (petals united) or polypetalous (petals free).

    (c) Androecium: Made of stamens. Each stamen, the male reproductive organ, has a filament and an anther. The anther is usually bilobed, and each lobe has two chambers, the pollen-sacs, in which pollen grains are produced.

    (d) Gynoecium: The female reproductive part, made of one or more carpels. Each carpel has a stigma, a style and an ovary. The ovary bears one or more ovules attached to a flattened, cushion-like placenta.

    Calyx and corolla are accessory organs, while androecium and gynoecium are reproductive organs. In some flowers, like lily, the calyx and corolla are not distinct and are together called the perianth. A flower with both androecium and gynoecium is bisexual; one with only stamens or only carpels is unisexual.

  9. 9

    Question 9

    (a) Define the term inflorescence.

    (b) Explain the basis for the different types of inflorescence in flowering plants.

    Easy
    2 marks
    Solve with AI
    Written solution

    (a) Inflorescence: The arrangement of flowers on the floral axis is termed inflorescence. A flower is a modified shoot in which the shoot apical meristem changes to a floral meristem. When a shoot tip transforms into a flower, it is always solitary.

    (b) Basis of the types: Inflorescences are classified on whether the apex of the main axis develops into a flower or continues to grow. This gives two major types:

    • Racemose: the main axis continues to grow, and the flowers are borne laterally in an acropetal succession.

    • Cymose: the main axis terminates in a flower, so it is limited in growth, and the flowers are borne in a basipetal order.

  10. 10

    Question 10

    Describe the arrangement of floral members in relation to their insertion on thalamus.

    Easy
    3 marks
    Solve with AI
    Written solution

    Based on the position of the calyx, corolla and androecium with respect to the ovary on the thalamus, flowers are described as hypogynous, perigynous and epigynous.

    Class 11 Biology Morphology Of Flowering Plants

    (a) Hypogynous: The gynoecium occupies the highest position, and the other parts are situated below it. The ovary is superior. Examples: mustard, china rose and brinjal.

    (b) Perigynous: The gynoecium is situated in the centre, and the other parts are located on the rim of the thalamus almost at the same level. The ovary is half inferior. Examples: plum, rose and peach.

    (c) Epigynous: The margin of the thalamus grows upward, enclosing the ovary completely and getting fused with it; the other parts of the flower arise above the ovary. The ovary is inferior. Examples: guava, cucumber and the ray florets of sunflower.

Inside Ch 5

What Class 11 Biology Ch 5 covers

The sections of the chapter, in the order the book takes them. Every question above comes from one of these.

  1. 01Morphology
  2. 02The Root
  3. 03The Stem
  4. 04The Leaf
  5. 05Phyllotaxy
  6. 06Inflorescence
  7. 07Flower
Common questions

Class 11 Biology Ch 5 questions students ask

How many questions are there in Class 11 Biology Ch 5?

10 questions. Every one is solved step by step on this page.

Are these Class 11 Biology solutions free?

Yes. Every question and its full working is free to read, with no account needed.

Can I download the Class 11 Biology Ch 5 solutions as a PDF?

There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.