Confirming your payment

Skip to content

Opening your dashboard

Class 10 Science Chapter 4: Carbon and its Compounds Question Answers

Chapter 4 of the Class 10 Science book, filed here under Chemistry. 15 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.

AI Tutor

Get talked through Ch 4, not just shown the answer

Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.

  • Ask it out loud, in your own words
  • It gives you the next step, not the answer
  • Stuck on part (ii)? Start there
Ch 4 question answers

15 questions with solutions

1–4 marks · Mixed difficulty

  1. 1

    Question 1

    Ethane, with the molecular formula C2H6\mathrm{C_2H_6} has

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) 6 covalent bonds.

    • (B) 7 covalent bonds.

      Correct
    • (C) 8 covalent bonds.

    • (D) 9 covalent bonds.

    Option (B) is correct.

    Explanation: Each carbon atom has four valence electrons and forms four covalent bonds; each hydrogen atom forms one. In ethane the two carbon atoms are joined to each other by one shared pair, and each carbon shares a pair with three hydrogen atoms:

    H3C−CH3\mathrm{H_3C{-}CH_3}
    • C–C bonds: 1
    • C–H bonds: 3 + 3 = 6

    Total covalent bonds = 1 + 6 = 7. A quick check: ethane has 2 × 4 + 6 × 1 = 14 valence electrons, and all of them are in shared pairs, so there are 14 ÷ 2 = 7 bonds.

    Option (A) is wrong: 6 counts only the C–H bonds and leaves out the bond that joins the two carbon atoms.

    Option (C) is wrong: 8 would need an extra shared pair, but each carbon already has exactly four bonds and each hydrogen one.

    Option (D) is wrong: 9 bonds would need 18 shared electrons, but ethane has only 14 valence electrons.

    homologous series

    The alkanes as a homologous series — each member one CH2_2 more than the one above it.

  2. 2

    Question 2

    Butanone is a four-carbon compound with the functional group

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) carboxylic acid.

    • (B) aldehyde.

    • (C) ketone.

      Correct
    • (D) alcohol.

    Option (C) is correct.

    Explanation: The name tells us the structure. "Butan-" means a chain of four carbon atoms, and the suffix "-one" stands for the ketone group (Table 4.4 of the book), in which a carbon atom inside the chain is joined to an oxygen atom by a double bond:

    CH3−CO−CH2−CH3\mathrm{CH_3{-}CO{-}CH_2{-}CH_3}

    The C=O carbon is bonded to two other carbon atoms, which is what makes it a ketone. Butanone has the same functional group as propanone, the first ketone in the book.

    Option (A) is wrong: a carboxylic acid has the –COOH group and its name ends in "-oic acid", as in butanoic acid.

    Option (B) is wrong: an aldehyde has the –CHO group at the end of the chain and its name ends in "-al", as in butanal.

    Option (D) is wrong: an alcohol has the –OH group and its name ends in "-ol", as in butanol.

    functional groups

    The functional groups of this chapter, each with a worked example.

  3. 3

    Question 3

    While cooking, if the bottom of the vessel is getting blackened on the outside, it means that

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) the food is not cooked completely.

    • (B) the fuel is not burning completely.

      Correct
    • (C) the fuel is wet.

    • (D) the fuel is burning completely.

    Option (B) is correct.

    Explanation: The black deposit on the outside of the vessel is soot, which is unburnt carbon. Soot forms only when a fuel burns incompletely because it does not get enough oxygen, and the flame then turns yellow and smoky. When the stove gets an oxygen-rich mixture through its air holes, the fuel burns completely to carbon dioxide and water with a clean blue flame and leaves no deposit. As the book puts it, blackened vessel bottoms mean that the air holes are blocked and fuel is getting wasted.

    Option (A) is wrong: whether the food is cooked has nothing to do with a deposit on the outside of the vessel, which comes from the flame.

    Option (C) is wrong: wet fuel is hard to light, but that is not what deposits carbon on the vessel; the black layer is soot from a shortage of air.

    Option (D) is wrong: complete combustion gives only carbon dioxide and water, so it cannot leave a black carbon deposit.

    Class 10 Chemistry Carbon and its Compounds

    The same fuel burnt with too little air and with plenty.

  4. 4

    Question 4

    Explain the nature of the covalent bond using the bond formation in CH3Cl\mathrm{CH_3Cl}.

    Medium
    3 marks
    Solve with AI
    Written solution

    A covalent bond is formed when two atoms share a pair of electrons, one electron coming from each atom. The shared pair belongs to the outermost shells of both atoms, so both reach the stable electronic configuration of a noble gas. No electrons are transferred, so no ions are formed.

    Atoms in CH3_3Cl and what each needs

    • Carbon (atomic number 6, electronic configuration 2, 4) has 4 valence electrons. Gaining or losing four electrons is too difficult, so it shares all four and needs 4 more to complete its octet.
    • Hydrogen (atomic number 1, configuration 1) has 1 electron and needs 1 more to have 2 electrons in its K shell, like helium.
    • Chlorine (atomic number 17, configuration 2, 8, 7) has 7 valence electrons and needs 1 more to complete its octet.

    Formation of the bonds

    • Carbon shares one of its electrons with each of the three hydrogen atoms, and each hydrogen shares its one electron with carbon. This gives three shared pairs: three C–H single covalent bonds.
    • Carbon shares its fourth electron with the chlorine atom, and chlorine shares one of its seven electrons. This gives one shared pair: one C–Cl single covalent bond. Chlorine keeps its other six electrons as three lone pairs.

    Counting electrons: carbon now has 4 shared pairs = 8 electrons, each hydrogen has 2 electrons, and chlorine has 1 shared pair + 3 lone pairs = 8 electrons. The molecule has 4 + 3 + 7 = 14 valence electrons in all, 8 in bonds and 6 in lone pairs.

    Nature of the bond

    All four bonds in CH3_3Cl are single covalent bonds, each made of one shared pair. Because the atoms are held together by sharing and not by ions, CH3_3Cl exists as separate molecules with weak forces of attraction between them. Like other covalent compounds, it has low melting and boiling points and does not conduct electricity.

    CH3_3Cl is the product of the substitution reaction of methane with chlorine in sunlight:

    CH4+Cl2→sunlightCH3Cl+HCl\mathrm{CH_4 + Cl_2 \xrightarrow{\text{sunlight}} CH_3Cl + HCl}

    Class 10 Chemistry Carbon and its Compounds

    Class 10 Chemistry Carbon and its Compounds

  5. 5

    Question 5

    Draw the electron dot structures for

    (a) ethanoic acid.

    (b) H2S\mathrm{H_2S}.

    (c) propanone.

    (d) F2\mathrm{F_2}.

    Medium
    4 marks
    Solve with AI
    Written solution

    In an electron-dot structure only the valence electrons are shown. Each shared pair between two atoms is one covalent bond (two shared pairs make a double bond). Every atom except hydrogen must end up with 8 electrons around it (an octet), and each hydrogen with 2.

    (a) Ethanoic acid, CH3_3COOH

    Valence electrons: 2 carbon × 4 + 4 hydrogen × 1 + 2 oxygen × 6 = 24.

    The methyl carbon shares pairs with three hydrogens and with the second carbon. The second carbon has a double bond (two shared pairs) to one oxygen and a single bond to the other oxygen, which is bonded to the acidic hydrogen. That makes 8 shared pairs (16 electrons); each oxygen keeps two lone pairs (8 electrons). Each carbon and each oxygen has 8 electrons around it, and each hydrogen 2.

    Class 10 Chemistry Carbon and its Compounds

    (b) Hydrogen sulphide, H2_2S

    Valence electrons: 2 hydrogen × 1 + 1 sulphur × 6 = 8.

    Sulphur (2, 8, 6) shares one electron with each hydrogen atom, giving two S–H single bonds (2 shared pairs). Its other four valence electrons stay as two lone pairs, so sulphur has 8 electrons around it and each hydrogen has 2. The structure is like that of water, since sulphur and oxygen both have 6 valence electrons.

    Class 10 Chemistry Carbon and its Compounds

    (c) Propanone, CH3_3COCH3_3

    Valence electrons: 3 carbon × 4 + 6 hydrogen × 1 + 1 oxygen × 6 = 24.

    The middle carbon is joined to the two end carbons by single bonds and to the oxygen by a double bond (the ketone group). Each end carbon shares pairs with three hydrogens. That makes 10 shared pairs (20 electrons); the oxygen keeps two lone pairs (4 electrons). Each carbon and the oxygen have 8 electrons around them, and each hydrogen 2.

    Class 10 Chemistry Carbon and its Compounds

    (d) Fluorine, F2_2

    Valence electrons: 2 fluorine × 7 = 14.

    Each fluorine atom (2, 7) needs one more electron, so the two atoms share one pair: a single covalent bond, F–F. Each fluorine keeps three lone pairs, so each has 2 + 6 = 8 electrons around it.

    Class 10 Chemistry Carbon and its Compounds

    Class 10 Chemistry Carbon and its Compounds

    More electron-dot structures from the chapter: single, double and triple bonds.

  6. 6

    Question 6

    What is an homologous series? Explain with an example.

    Medium
    2 marks
    Solve with AI
    Written solution

    A homologous series is a series of carbon compounds in which the same functional group substitutes for hydrogen in carbon chains of different lengths. Its members have these features:

    • Any two successive members differ by a –CH2_2– unit, that is, by 14 u in molecular mass (12 u for C + 2 × 1 u for H).
    • All members can be represented by the same general formula.
    • Their chemical properties are similar, because chemical properties are decided by the functional group, which is the same in all of them.
    • Their physical properties show a gradation: melting point, boiling point and solubility change gradually as the molecular mass increases.

    Example: the alcohols

    CompoundFormulaDifference from the previous member
    MethanolCH3OH\mathrm{CH_3OH}—
    EthanolC2H5OH\mathrm{C_2H_5OH}–CH2_2– (14 u)
    PropanolC3H7OH\mathrm{C_3H_7OH}–CH2_2– (14 u)
    ButanolC4H9OH\mathrm{C_4H_9OH}–CH2_2– (14 u)

    All four contain the –OH group, so their chemical properties are very similar; for example, each reacts with sodium to give hydrogen. Their boiling points rise steadily from methanol to butanol as the chain gets longer.

    The alkanes form another homologous series: CH4_4, C2_2H6_6, C3_3H8_8, C4_4H10_{10}, with general formula Cn_nH2n+2_{2n+2}.

    homologous series

    The alkanes as a homologous series — each member one CH2_2 more than the one above it.

  7. 7

    Question 7

    How can ethanol and ethanoic acid be differentiated on the basis of their physical and chemical properties?

    Medium
    3 marks
    Solve with AI
    Written solution

    Physical properties

    PropertyEthanol, CH3CH2OH\mathrm{CH_3CH_2OH}Ethanoic acid, CH3COOH\mathrm{CH_3COOH}
    SmellCharacteristic smell of alcoholPungent smell of vinegar
    Melting point156 K, so it stays liquid even in very cold weather290 K (about 17 °C), so the pure acid often freezes in winter in cold places; hence the name glacial acetic acid
    Boiling point351 K391 K

    Chemical properties

    TestEthanolEthanoic acid
    Blue litmusNo change (neutral)Turns red (acidic)
    Sodium hydrogencarbonate or sodium carbonateNo reactionBrisk effervescence of carbon dioxide, which turns lime water milky
    Warm with alkaline potassium permanganatePink-purple colour disappears, because ethanol is oxidised to ethanoic acidColour stays; the acid is not oxidised further

    The most convenient test is with sodium hydrogencarbonate. Only ethanoic acid reacts:

    CH3COOH(aq)+NaHCO3(s)→CH3COONa(aq)+H2O(l)+CO2(g)\mathrm{CH_3COOH(aq) + NaHCO_3(s) \rightarrow CH_3COONa(aq) + H_2O(l) + CO_2(g)}

    Ethanol shows no effervescence. The oxidation test works the other way round: only ethanol is oxidised by alkaline potassium permanganate (or acidified potassium dichromate):

    CH3CH2OH+2[O]→alkaline KMnO4, heatCH3COOH+H2O\mathrm{CH_3CH_2OH + 2[O] \xrightarrow{\text{alkaline } KMnO_4,\ \text{heat}} CH_3COOH + H_2O}

    Here [O] stands for the oxygen supplied by the oxidising agent.

    ethanoic acid reactions

    The reactions of ethanoic acid, all of them consequences of the —COOH group.

    Class 10 Chemistry Carbon and its Compounds

    The reactions of ethanol, all of them reactions of the —OH group.

  8. 8

    Question 8

    Why does micelle formation take place when soap is added to water? Will a micelle be formed in other solvents such as ethanol also?

    Medium
    3 marks
    Solve with AI
    Written solution

    Why micelles form in water

    A soap molecule is the sodium or potassium salt of a long-chain carboxylic acid, and its two ends behave differently:

    • the ionic end (–COO−^-Na+^+) is hydrophilic: it interacts with water and dissolves in it;
    • the long hydrocarbon chain (the "tail") is hydrophobic: it does not dissolve in water, but it dissolves in oil.

    When soap is added to water, the tails try to keep away from the water. So the soap molecules gather into clusters in which the hydrocarbon tails point inwards, into the centre of the cluster, and the ionic ends sit on the surface, facing the water. Such a cluster is called a micelle. Oily dirt collects in the hydrocarbon centre of the micelle. Because every micelle carries charged ends on its surface, the micelles repel one another and stay suspended in the water, and the dirt is rinsed away with them.

    Will micelles form in ethanol?

    No. Micelles form only because the hydrocarbon tail is insoluble in water. Ethanol is an organic solvent in which the hydrocarbon part of the soap molecule also dissolves. Both ends of the molecule are therefore comfortable in ethanol, the molecules have no reason to bunch together, and the soap simply dissolves as separate molecules. No micelles are formed.

    micelle

    A soap molecule and the micelle it forms around a droplet of oil.

  9. 9

    Question 9

    Why are carbon and its compounds used as fuels for most applications?

    Medium
    2 marks
    Solve with AI
    Written solution

    Carbon and its compounds are used as fuels for most applications because:

    1. They give out a large amount of heat and light on burning. Carbon in all its forms burns in oxygen to give carbon dioxide, and most carbon compounds also release a large amount of heat and light when they burn. They have a high calorific value, so a small amount of fuel gives a lot of energy.
    2. They burn with a clean flame in enough air. Saturated hydrocarbons such as methane (natural gas, CNG) and the gases in LPG burn completely with a clean blue flame, forming only carbon dioxide and water.
    3. Their burning is easy to start and control. Their ignition temperatures are moderate, and the rate of burning can be regulated, as in a gas stove or an engine.
    4. They are easily available. Coal, petroleum and natural gas are found in large deposits, and wood, charcoal, biogas and alcohol from sugarcane are also carbon based.
    5. They are convenient to store and transport as solids (coal, charcoal), liquids (petrol, kerosene, diesel) or gases (LPG, CNG).

    For example:

    C(s)+O2(g)→CO2(g)+heat and light\mathrm{C(s) + O_2(g) \rightarrow CO_2(g)} + \text{heat and light} CH4(g)+2O2(g)→CO2(g)+2H2O(g)+heat and light\mathrm{CH_4(g) + 2O_2(g) \rightarrow CO_2(g) + 2H_2O(g)} + \text{heat and light}

    Class 10 Chemistry Carbon and its Compounds

    The same fuel burnt with too little air and with plenty.

  10. 10

    Question 10

    Explain the formation of scum when hard water is treated with soap.

    Medium
    2 marks
    Solve with AI
    Written solution

    Hard water contains dissolved salts of calcium and magnesium, such as their hydrogencarbonates, chlorides and sulphates. Soap is the sodium or potassium salt of a long-chain carboxylic acid, for example sodium stearate, C17H35COONa\mathrm{C_{17}H_{35}COONa}.

    When soap is added to hard water, the calcium and magnesium ions react with the soap. They take the place of sodium and form the calcium and magnesium salts of the long-chain acid, which are insoluble in water. These separate out as a white, curdy solid called scum:

    2C17H35COONa(aq)+CaCl2(aq)→(C17H35COO)2Ca(s)+2NaCl(aq)\mathrm{2C_{17}H_{35}COONa(aq) + CaCl_2(aq) \rightarrow (C_{17}H_{35}COO)_2Ca(s) + 2NaCl(aq)} 2C17H35COONa(aq)+MgCl2(aq)→(C17H35COO)2Mg(s)+2NaCl(aq)\mathrm{2C_{17}H_{35}COONa(aq) + MgCl_2(aq) \rightarrow (C_{17}H_{35}COO)_2Mg(s) + 2NaCl(aq)}

    Consequences:

    • Much of the soap is used up in forming scum before any lather forms, so a larger amount of soap is needed.
    • The scum sticks to clothes and skin and is hard to wash off.

    Detergents do not have this problem: their charged ends do not form insoluble precipitates with calcium and magnesium ions, so they remain effective in hard water.

    Class 10 Chemistry Carbon and its Compounds

    micelle

    A soap molecule and the micelle it forms around a droplet of oil.

  11. 11

    Question 11

    What change will you observe if you test soap with litmus paper (red and blue)?

    Medium
    2 marks
    Solve with AI
    Written solution

    A soap solution is basic (alkaline), so:

    • Red litmus turns blue.
    • Blue litmus shows no change (it stays blue).

    Reason: soap is the sodium or potassium salt of a long-chain carboxylic acid. A carboxylic acid is a weak acid, while sodium hydroxide and potassium hydroxide are strong bases. A salt of a weak acid and a strong base gives a basic solution in water, so the soap solution turns red litmus blue. A base has no effect on blue litmus.

    Class 10 Chemistry Carbon and its Compounds

  12. 12

    Question 12

    What is hydrogenation? What is its industrial application?

    Medium
    2 marks
    Solve with AI
    Written solution

    Hydrogenation is the addition of hydrogen to an unsaturated compound (one with a carbon–carbon double or triple bond) in the presence of a catalyst such as nickel or palladium, giving a saturated compound. It is an addition reaction: the double bond opens and one hydrogen atom adds to each carbon. For example, ethene is hydrogenated to ethane:

    CH2=CH2+H2→Ni catalystCH3−CH3\mathrm{CH_2{=}CH_2 + H_2 \xrightarrow{\text{Ni catalyst}} CH_3{-}CH_3}

    Industrial application: hydrogenation of vegetable oils using a nickel catalyst. Vegetable oils have long unsaturated carbon chains and are liquids. Adding hydrogen turns these chains saturated, and the oil becomes a solid fat such as vanaspati ghee.

    A health note from the book: animal fats generally contain saturated fatty acids, which are said to be harmful for health, so oils containing unsaturated fatty acids should be chosen for cooking. Hydrogenated oils are saturated in the same way.

    Class 10 Chemistry Carbon and its Compounds

    saturated unsaturated

    Alkane, alkene and alkyne: how many bonds the carbons share, and what follows from it.

  13. 13

    Question 13

    Which of the following hydrocarbons undergo addition reactions:

    C2H6\mathrm{C_2H_6}, C3H8\mathrm{C_3H_8}, C3H6\mathrm{C_3H_6}, C2H2\mathrm{C_2H_2} and CH4\mathrm{CH_4}.

    Medium
    2 marks
    Solve with AI
    Written solution

    Addition reactions are shown only by unsaturated hydrocarbons, which have a carbon–carbon double or triple bond. Saturated hydrocarbons (alkanes, general formula Cn_nH2n+2_{2n+2}) have only single bonds and do not undergo addition.

    HydrocarbonFitsTypeAddition reaction?
    C2_2H6_6 (ethane)Cn_nH2n+2_{2n+2}alkane, single bonds onlyNo
    C3_3H8_8 (propane)Cn_nH2n+2_{2n+2}alkane, single bonds onlyNo
    C3_3H6_6 (propene)Cn_nH2n_{2n}alkene, one C=C double bondYes
    C2_2H2_2 (ethyne)Cn_nH2n−2_{2n-2}alkyne, one C≡C triple bondYes
    CH4_4 (methane)Cn_nH2n+2_{2n+2}alkane, single bonds onlyNo

    So C3_3H6_6 and C2_2H2_2 undergo addition reactions. For example, with hydrogen in the presence of a nickel catalyst:

    C3H6+H2→NiC3H8\mathrm{C_3H_6 + H_2 \xrightarrow{\text{Ni}} C_3H_8} C2H2+2H2→NiC2H6\mathrm{C_2H_2 + 2H_2 \xrightarrow{\text{Ni}} C_2H_6}

    The saturated hydrocarbons C2_2H6_6, C3_3H8_8 and CH4_4 react instead by substitution, for example with chlorine in sunlight.

    saturated unsaturated

    Alkane, alkene and alkyne: how many bonds the carbons share, and what follows from it.

  14. 14

    Question 14

    Give a test that can be used to differentiate between saturated and unsaturated hydrocarbons.

    Medium
    3 marks
    Solve with AI
    Written solution

    Test 1: bromine water test (addition reaction)

    Shake a little of the hydrocarbon with a few drops of bromine water, which is orange-brown.

    • Unsaturated hydrocarbon (with a C=C or C≡C bond): the orange-brown colour disappears, because bromine adds across the multiple bond.
    • Saturated hydrocarbon (only single bonds): the colour stays, because there is no multiple bond for bromine to add to.
    CH2=CH2+Br2→CH2Br−CH2Br\mathrm{CH_2{=}CH_2 + Br_2 \rightarrow CH_2Br{-}CH_2Br}

    Class 10 Chemistry Carbon and its Compounds

    Test 2: burning (the book's Activity 4.3)

    Burn a small sample on a spatula with a good supply of air and hold a metal plate above the flame.

    • Saturated hydrocarbons generally burn with a clean blue flame and leave no deposit.
    • Unsaturated hydrocarbons burn with a yellow flame with lots of black smoke, leaving a sooty deposit on the plate.

    The supply of air must be plentiful, because limiting the air makes even a saturated hydrocarbon burn incompletely with a sooty flame.

    saturated unsaturated

    Alkane, alkene and alkyne: how many bonds the carbons share, and what follows from it.

  15. 15

    Question 15

    Explain the mechanism of the cleaning action of soaps.

    Medium
    4 marks
    Solve with AI
    Written solution

    Structure of a soap molecule

    A soap molecule is the sodium or potassium salt of a long-chain carboxylic acid, for example C17H35COO−Na+\mathrm{C_{17}H_{35}COO^-Na^+}. It has two parts:

    • an ionic end (–COO−^-), which is hydrophilic: it interacts with water;
    • a long hydrocarbon tail, which is hydrophobic: it does not dissolve in water but dissolves in oil and grease.

    How soap cleans

    1. Most dirt is oily, and oil does not dissolve in water, so water alone cannot wash it away.
    2. Micelle formation: in soap solution, the hydrocarbon tails of the soap molecules dissolve in the oily dirt, while the ionic ends stay in the water, pointing outwards. The soap molecules thus surround the oil droplet in a cluster called a micelle, with the dirt trapped in the centre.
    3. Emulsion: the micelles carry charged ionic ends on their surface, so they repel one another and do not come together to settle. The oily dirt stays spread through the water as an emulsion.
    4. Agitation helps: rubbing, beating or scrubbing the clothes, or a washing machine, loosens the dirt from the fibres so that more micelles can form around it.
    5. Rinsing: when the clothes are rinsed, the micelles, with the dirt inside them, are carried away by the water, leaving the clothes clean.

    micelle

    A soap molecule and the micelle it forms around a droplet of oil.

Inside Ch 4

What Class 10 Science Ch 4 covers

The sections of the chapter, in the order the book takes them. Every question above comes from one of these.

  1. 01Existence Of Carbon
  2. 02Bonding In Carbon
  3. 03Versatile Nature Of Carbon
  4. 04Saturated And Unsaturated Compounds
  5. 05Functional Group
  6. 06Homologous Series
  7. 07Chemical Reactions Of Carbon Compounds
From the board papers

Ch 4 in past CBSE papers

The same chapter as the board has actually asked it. These are worded differently from the textbook exercise, which is the point of reading them.

  1. 1

    Board paper question 1

    Assertion (A): Propanal and propanone are structural isomers.

    Reason (R): Propanal and propanone both have the same molecular formula.

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of Assertion (A).

      Correct
    • (B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of Assertion (A).

    • (C) Assertion (A) is true, but Reason (R) is false.

    • (D) Assertion (A) is false, but Reason (R) is true.

    Option (A) is correct.

    Explanation: Propanal, CH3CH2CHO\mathrm{CH_3CH_2CHO}, is an aldehyde: its −CHO\mathrm{-CHO} group sits at the end of the three-carbon chain. Propanone, CH3COCH3\mathrm{CH_3COCH_3}, is a ketone: its C=O\mathrm{C=O} group sits on the middle carbon. Counting atoms, both are C3H6O\mathrm{C_3H_6O}.

    Compounds with the same molecular formula but different structures are structural isomers, so the Assertion is true. The Reason is also true, and it is exactly the condition that makes two differently built compounds isomers rather than simply two different compounds. So R correctly explains A.

    Option (B) is wrong: R is not a side fact here; the same molecular formula is what makes two compounds of different structure isomers, so R does explain A.

    Option (C) is wrong: R is true; counting carbon, hydrogen and oxygen atoms gives C3H6O\mathrm{C_3H_6O} for both compounds.

    Option (D) is wrong: A is true; the two compounds have different structures (the oxygen is on an end carbon in one and on the middle carbon in the other) with the same formula.

    Class 10 Chemistry Carbon and its Compounds

  2. 2

    Board paper question 2

    Given below are the structures of some hydrocarbons. Select the two structures which are related to each other from the given options :

    Class 10 Chemistry Carbon and its Compounds

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) (i) and (iv)

    • (B) (ii) and (iv)

    • (C) (ii) and (iii)

      Correct
    • (D) (i) and (iii)

    Option (C) is correct.

    Explanation: Write the molecular formula of each structure by counting its atoms.

    • (i) CH3−CH2−CH=CH2\mathrm{CH_3-CH_2-CH=CH_2} has one double bond: C4H8\mathrm{C_4H_8}, an alkene.
    • (ii) CH3−CH2−CH2−CH3\mathrm{CH_3-CH_2-CH_2-CH_3} is a straight chain of four carbons with only single bonds: C4H10\mathrm{C_4H_{10}} (butane).
    • (iii) CH3−CH(CH3)−CH3\mathrm{CH_3-CH(CH_3)-CH_3} is a branched chain, three carbons in a row with one carbon on the middle one: also C4H10\mathrm{C_4H_{10}} (isobutane).
    • (iv) Cl−CH2−CH2−CH=CH2\mathrm{Cl-CH_2-CH_2-CH=CH_2} carries a chlorine atom and a double bond: C4H7Cl\mathrm{C_4H_7Cl}.

    Only (ii) and (iii) have the same molecular formula. They differ only in how the carbon skeleton is arranged (straight chain against branched chain), so they are structural isomers of each other.

    Option (A) is wrong: (i) is C4H8\mathrm{C_4H_8} and (iv) is C4H7Cl\mathrm{C_4H_7Cl}; they have different formulae.

    Option (B) is wrong: (ii) is C4H10\mathrm{C_4H_{10}} while (iv) contains chlorine and a double bond, C4H7Cl\mathrm{C_4H_7Cl}.

    Option (D) is wrong: (i) is the unsaturated C4H8\mathrm{C_4H_8}, but (iii) is the saturated C4H10\mathrm{C_4H_{10}}.

    Class 10 Chemistry Carbon and its Compounds

  3. 3

    Board paper question 3

    Choose the incorrect statement about the common reaction used in hydrogenation of vegetable oils ?

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) It is an addition reaction.

    • (B) It takes place in the presence of nickel or palladium catalyst.

    • (C) The product contains only single bonds between carbon atoms.

    • (D) It is an addition reaction which occurs in the presence of an acid catalyst.

      Correct

    Option (D) is correct.

    Explanation: Vegetable oils have long unsaturated carbon chains. In hydrogenation, hydrogen adds across the carbon-carbon double bonds in the presence of a nickel or palladium catalyst, giving saturated chains:

    CH2=CH2+H2→Ni catalystCH3−CH3\mathrm{CH_2=CH_2 + H_2 \xrightarrow{\text{Ni catalyst}} CH_3-CH_3}

    The catalyst is a metal, not an acid. An acid catalyst is used in esterification (an acid and an alcohol giving an ester), which is a different reaction. So statement (D) is the incorrect one.

    Option (A) is wrong: this statement is correct, because hydrogen adds to the unsaturated chain and nothing is removed, which is an addition reaction.

    Option (B) is wrong: this statement is correct, because the book names nickel and palladium as the catalysts for hydrogenation.

    Option (C) is wrong: this statement is correct, because once hydrogen has added across every double bond, the carbons are joined only by single bonds (a saturated product).

    saturated unsaturated

    Alkane, alkene and alkyne: how many bonds the carbons share, and what follows from it.

  4. 4

    Board paper question 4

    Select from the following a hydrocarbon having C−C bond and C=C bond ?

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) Benzene

      Correct
    • (B) Cyclohexane

    • (C) Butyne

    • (D) Propyne

    Option (A) is correct.

    Explanation: Benzene, C6H6\mathrm{C_6H_6}, is a ring of six carbon atoms in which single and double bonds alternate. So it has carbon-carbon single bonds (C−C\mathrm{C-C}) and carbon-carbon double bonds (C=C\mathrm{C=C}) in the same molecule.

    Option (B) is wrong: cyclohexane, C6H12\mathrm{C_6H_{12}}, is a saturated ring; all its carbon-carbon bonds are single, with no C=C\mathrm{C=C}.

    Option (C) is wrong: butyne, C4H6\mathrm{C_4H_6}, has C−C\mathrm{C-C} single bonds and a C≡C\mathrm{C\equiv C} triple bond, but no double bond.

    Option (D) is wrong: propyne, CH3−C≡CH\mathrm{CH_3-C\equiv CH}, has one C−C\mathrm{C-C} single bond and one triple bond, but no double bond.

    saturated unsaturated

    Alkane, alkene and alkyne: how many bonds the carbons share, and what follows from it.

    benzene

  5. 5

    Board paper question 5

    If we make carbon skeleton with four carbon atoms, the two different possible skeletons will be ?

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) Class 10 Chemistry Carbon and its Compounds

    • (B) Class 10 Chemistry Carbon and its Compounds

      Correct
    • (C) Class 10 Chemistry Carbon and its Compounds

    • (D) Class 10 Chemistry Carbon and its Compounds

    Option (B) is correct.

    Explanation: Four carbon atoms can be joined in only two different ways:

    • all four in one unbroken chain, C-C-C-C (the skeleton of butane);
    • three in a chain with the fourth attached to the middle carbon, so that one carbon is bonded to the other three (the skeleton of isobutane).

    Option (B) shows exactly these two. Bending a chain or turning a drawing does not make a new skeleton: what matters is which carbon is bonded to which.

    Option (A) is wrong: in its first skeleton the extra carbon hangs from an end carbon, so following the bonds still gives an unbroken chain of four; it is the straight chain drawn bent, the same skeleton twice.

    Option (C) is wrong: its second skeleton has only three carbon atoms, not four.

    Option (D) is wrong: its second skeleton has only two carbon atoms, not four.

    Class 10 Chemistry Carbon and its Compounds

  6. 6

    Board paper question 6

    A Hydrocarbon which does not belong to the same homologous series of carbon compounds is:

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) C₄H₁₀

    • (B) C₆H₁₄

    • (C) C₇H₁₄

      Correct
    • (D) C₁₀H₂₂

    Option (C) is correct.

    Explanation: Members of one homologous series share one general formula, and successive members differ by CH2\mathrm{CH_2}. Three of the options fit the alkane formula CnH2n+2\mathrm{C_nH_{2n+2}}:

    • C4H10\mathrm{C_4H_{10}}: n=4n = 4, 2n+2=102n + 2 = 10
    • C6H14\mathrm{C_6H_{14}}: n=6n = 6, 2n+2=142n + 2 = 14
    • C10H22\mathrm{C_{10}H_{22}}: n=10n = 10, 2n+2=222n + 2 = 22

    C7H14\mathrm{C_7H_{14}} has n=7n = 7 but only 14 hydrogen atoms, which fits CnH2n\mathrm{C_nH_{2n}} (an alkene, or a ring). An alkane with seven carbons would be C7H16\mathrm{C_7H_{16}}. So C7H14\mathrm{C_7H_{14}} does not belong to the series of the other three.

    Option (A) is wrong: C4H10\mathrm{C_4H_{10}} (butane) fits CnH2n+2\mathrm{C_nH_{2n+2}}, so it is an alkane like the others.

    Option (B) is wrong: C6H14\mathrm{C_6H_{14}} (hexane) fits CnH2n+2\mathrm{C_nH_{2n+2}}, so it is an alkane.

    Option (D) is wrong: C10H22\mathrm{C_{10}H_{22}} fits CnH2n+2\mathrm{C_nH_{2n+2}}, so it is an alkane.

    homologous series

    The alkanes as a homologous series — each member one CH2_2 more than the one above it.

All 30 board paper questions for this chapter, solved the same way.

Common questions

Class 10 Science Ch 4 questions students ask

How many questions are there in Class 10 Science Ch 4?

15 questions. Every one is solved step by step on this page.

Are these Class 10 Chemistry question answers free?

Yes. Every question and its full working is free to read, with no account needed.

Can I download the Class 10 Chemistry Ch 4 solutions as a PDF?

There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.