Confirming your payment

Skip to content

Opening your dashboard

Class 10 Science Chapter 3: Metals and Non-metals Question Answers

Chapter 3 of the Class 10 Science book, filed here under Chemistry. 16 textbook questions with step-by-step answers, free to read, for CBSE 2026-27.

AI Tutor

Get talked through Ch 3, not just shown the answer

Reading a finished solution is not the same as being able to do it. The AI tutor takes one question at a time and works it with you, in your own words, until you can.

  • Ask it out loud, in your own words
  • It gives you the next step, not the answer
  • Stuck on part (ii)? Start there
Ch 3 question answers

16 questions with solutions

1–4 marks · Mixed difficulty

  1. 1

    Question 1

    Which of the following pairs will give displacement reactions?

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) NaCl solution and copper metal

    • (B) MgCl₂ solution and aluminium metal

    • (C) FeSO₄ solution and silver metal

    • (D) AgNO₃ solution and copper metal

      Correct

    Option (D) is correct.

    Explanation: A metal displaces another metal from a solution of its salt only if it is more reactive than the metal in the salt, that is, if it lies above it in the reactivity series (K, Na, Ca, Mg, Al, Zn, Fe, Pb, [H], Cu, Hg, Ag, Au). Copper lies above silver, so copper metal displaces silver from silver nitrate solution. The solution slowly turns blue as copper nitrate forms, and grey-white silver collects on the copper:

    Cu(s)+2AgNO3(aq)→Cu(NO3)2(aq)+2Ag(s)\mathrm{Cu(s) + 2AgNO_3(aq) \rightarrow Cu(NO_3)_2(aq) + 2Ag(s)}

    Option (A) is wrong: copper lies far below sodium in the reactivity series, so copper cannot displace sodium from sodium chloride solution.

    Option (B) is wrong: aluminium lies below magnesium, so aluminium cannot displace magnesium from magnesium chloride solution.

    Option (C) is wrong: silver lies below iron, so silver cannot displace iron from iron sulphate solution.

    Class 10 Chemistry Metals and Non-metals

    Copper in silver nitrate solution: the more reactive copper displaces silver.

    displacement solution

    A more reactive metal displacing a less reactive one from a solution of its salt.

  2. 2

    Question 2

    Which of the following methods is suitable for preventing an iron frying pan from rusting?

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) Applying grease

    • (B) Applying paint

    • (C) Applying a coating of zinc

      Correct
    • (D) All of the above.

    Option (C) is correct.

    Explanation: Iron rusts only when both air (oxygen) and water (moisture) reach its surface, so any coating that keeps them out protects it. A frying pan, however, is heated strongly and washed again and again, so the coating must survive heat and washing and must not spoil the food.

    A coating of zinc (galvanising) is a thin metal layer bonded to the iron. It is not burnt off by cooking heat or washed away, so it keeps protecting the pan. Even if the zinc layer is scratched, the iron underneath is still protected.

    Option (A) is wrong: grease would burn and wash off every time the pan is used, and it would get into the food.

    Option (B) is wrong: paint would blister and peel off when the pan is heated, and flakes of paint would contaminate the food.

    Option (D) is wrong: grease and paint protect iron articles in general, but they are not suitable for a frying pan, so "All of the above" is not correct.

    rusting experiment

    Iron rusts only when both air and water reach it, so any coating that keeps them out protects it.

  3. 3

    Question 3

    An element reacts with oxygen to give a compound with a high melting point. This compound is also soluble in water. The element is likely to be

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) calcium

      Correct
    • (B) carbon

    • (C) silicon

    • (D) iron

    Option (A) is correct.

    Explanation: Calcium is a metal, so it burns in oxygen to give a basic oxide, calcium oxide:

    2Ca(s)+O2(g)→2CaO(s)\mathrm{2Ca(s) + O_2(g) \rightarrow 2CaO(s)}

    Calcium oxide is an ionic compound (made of Ca2+\mathrm{Ca^{2+}} and O2−\mathrm{O^{2-}} ions). The strong attraction between oppositely charged ions makes it a hard solid with a very high melting point. Like the oxides of sodium and potassium, it dissolves in water to form an alkali, calcium hydroxide:

    CaO(s)+H2O(l)→Ca(OH)2(aq)\mathrm{CaO(s) + H_2O(l) \rightarrow Ca(OH)_2(aq)}

    So calcium is the element whose oxide has both properties: a high melting point and solubility in water.

    Option (B) is wrong: carbon is a non-metal; its oxide, carbon dioxide, is a gas at room temperature, so it does not have a high melting point.

    Option (C) is wrong: silicon dioxide (sand) does have a high melting point, but it is insoluble in water.

    Option (D) is wrong: iron oxide has a high melting point, but it is insoluble in water (rust does not dissolve when it gets wet).

    oxides acid base

    Basic, amphoteric and acidic oxides, and how each behaves with an acid and with a base.

  4. 4

    Question 4

    Food cans are coated with tin and not with zinc because

    MCQEasy
    1 mark
    Solve with AI
    Answer
    • (A) zinc is costlier than tin.

    • (B) zinc has a higher melting point than tin.

    • (C) zinc is more reactive than tin.

      Correct
    • (D) zinc is less reactive than tin.

    Option (C) is correct.

    Explanation: Food often contains acids (fruit juices, pickles, tomatoes). A metal that lies higher in the reactivity series reacts more readily with acids. Zinc is more reactive than tin, so a zinc coating would react with the acids in the food, forming zinc compounds that would spoil and contaminate the food, and the coating itself would be eaten away. Tin lies lower in the series, so food acids hardly affect it. That is why food cans are tin-plated and not galvanised.

    Option (A) is wrong: the choice of coating for a food can is decided by how the metal behaves with the food, not by price; in fact zinc is the cheaper of the two.

    Option (B) is wrong: the melting point of the coating plays no part in keeping food safe; a can is never heated anywhere near the melting point of either metal.

    Option (D) is wrong: it states the reverse of the truth; zinc lies above tin in the reactivity series, so zinc is the more reactive metal.

    Class 10 Chemistry Metals and Non-metals

    Zinc lies above tin in the reactivity series, so food acids attack zinc but hardly affect tin.

  5. 5

    Question 5

    You are given a hammer, a battery, a bulb, wires and a switch.

    (a) How could you use them to distinguish between samples of metals and non-metals?

    (b) Assess the usefulness of these tests in distinguishing between metals and non-metals.

    Medium
    3 marks
    Solve with AI
    Written solution

    (a) Two tests can be carried out with the items given.

    Malleability test (hammer): Place each sample on a hard surface and strike it a few times with the hammer. A metal (iron, copper, aluminium, zinc) flattens into a thin sheet without breaking, because metals are malleable. A non-metal such as sulphur, coal (carbon) or iodine breaks into pieces or powder, because solid non-metals are brittle.

    Conductivity test (battery, bulb, wires, switch): Connect the battery, the switch and the bulb in a circuit with wires, leaving a gap between two ends, A and B. Place the sample across the gap so that it touches both ends, and close the switch.

    • If the bulb glows, current passes through the sample: it is a good conductor of electricity, so it is a metal.
    • If the bulb does not glow, the sample does not conduct: it is a non-metal.

    (b) The tests are useful but not fully reliable, because there are exceptions to the physical properties of metals and non-metals.

    • Conductivity test: graphite, a form of carbon, is a non-metal but conducts electricity, so the bulb would glow and graphite would be wrongly called a metal.
    • Hammer test: it can be used only on solids, so it cannot be applied to mercury (a liquid metal) or to bromine (a liquid non-metal). A metal in powder form, such as zinc dust, would not flatten into a sheet either, so the sample must be a solid piece.

    So these physical tests give a good indication when used together, but they cannot settle every case. Metals and non-metals are classified more clearly on the basis of their chemical properties, for example by testing whether the oxide is basic or acidic.

    Class 10 Chemistry Metals and Non-metals

    The conductivity test: the sample is placed between terminals A and B.

  6. 6

    Question 6

    What are amphoteric oxides? Give two examples of amphoteric oxides.

    Medium
    2 marks
    Solve with AI
    Written solution

    Amphoteric oxides are metal oxides that show both acidic and basic behaviour: they react with acids as well as with bases to produce a salt and water. Most metal oxides are basic and react only with acids; an amphoteric oxide reacts with both.

    Two examples: aluminium oxide, Al2O3\mathrm{Al_2O_3}, and zinc oxide, ZnO\mathrm{ZnO}.

    Aluminium oxide behaves as a base with hydrochloric acid:

    Al2O3+6HCl→2AlCl3+3H2O\mathrm{Al_2O_3 + 6HCl \rightarrow 2AlCl_3 + 3H_2O}

    and as an acid with sodium hydroxide, forming sodium aluminate:

    Al2O3+2NaOH→2NaAlO2+H2O\mathrm{Al_2O_3 + 2NaOH \rightarrow 2NaAlO_2 + H_2O}

    In both reactions a salt and water are formed, which is exactly what makes the oxide amphoteric. Zinc oxide behaves in the same way, reacting with acids and with bases.

    oxides acid base

    Basic, amphoteric and acidic oxides, and how each behaves with an acid and with a base.

  7. 7

    Question 7

    Name two metals which will displace hydrogen from dilute acids, and two metals which will not.

    Medium
    2 marks
    Solve with AI
    Written solution

    Only metals that are more reactive than hydrogen (above hydrogen in the reactivity series) can displace hydrogen from dilute acids.

    Two metals that displace hydrogen: zinc and magnesium. Both lie above hydrogen, and they react with dilute hydrochloric acid to give a salt and hydrogen gas:

    Zn(s)+2HCl(aq)→ZnCl2(aq)+H2(g)\mathrm{Zn(s) + 2HCl(aq) \rightarrow ZnCl_2(aq) + H_2(g)} Mg(s)+2HCl(aq)→MgCl2(aq)+H2(g)\mathrm{Mg(s) + 2HCl(aq) \rightarrow MgCl_2(aq) + H_2(g)}

    Two metals that do not displace hydrogen: copper and silver. Both lie below hydrogen in the reactivity series, so they are less reactive than hydrogen and cannot displace it; no bubbles are seen when copper is put in dilute hydrochloric acid. (Gold is another such metal.)

    reactivity series

    The reactivity series: what each metal reacts with, and how it is obtained from its ore.

  8. 8

    Question 8

    In the electrolytic refining of a metal M, what would you take as the anode, the cathode and the electrolyte?

    Medium
    3 marks
    Solve with AI
    Written solution

    In electrolytic refining the impure metal is dissolved at one electrode and deposited in pure form on the other.

    Anode: a thick block of the impure metal M. On passing current, metal M from the anode dissolves into the electrolyte.

    Cathode: a thin strip of pure metal M. An equivalent amount of pure M from the electrolyte is deposited on it, so the cathode grows thicker with pure metal.

    Electrolyte: a solution of a salt of metal M (for copper, acidified copper sulphate solution).

    The soluble impurities go into the solution, while the insoluble impurities settle at the bottom below the anode as anode mud.

    Class 10 Chemistry Metals and Non-metals

    Electrolytic refining: the impure metal dissolves at the anode and rebuilds itself, pure, at the cathode.

  9. 9

    Question 9

    Pratyush took sulphur powder on a spatula and heated it. He collected the gas evolved by inverting a test tube over it, as shown in figure below.

    Class 10 Chemistry Metals and Non-metals

    (a) What will be the action of gas on

    (i) dry litmus paper?

    (ii) moist litmus paper?

    (b) Write a balanced chemical equation for the reaction taking place.

    Medium
    4 marks
    Solve with AI
    Written solution

    When sulphur is heated in air it burns, combining with oxygen to form sulphur dioxide gas, SO2\mathrm{SO_2}. Sulphur is a non-metal, and like most non-metal oxides, sulphur dioxide is an acidic oxide.

    (a)

    (i) Dry litmus paper: no change. Dry sulphur dioxide cannot give an acid, because an acidic oxide shows its acidic nature only after it dissolves in water. With no water present, dry blue litmus stays blue (and dry red litmus stays red).

    (ii) Moist litmus paper: blue litmus turns red (red litmus stays red). The gas dissolves in the water on the paper to form sulphurous acid, and this acid turns blue litmus red:

    SO2(g)+H2O(l)→H2SO3(aq)\mathrm{SO_2(g) + H_2O(l) \rightarrow H_2SO_3(aq)}

    (b) Burning of sulphur in air:

    S(s)+O2(g)→SO2(g)\mathrm{S(s) + O_2(g) \rightarrow SO_2(g)}

    This is why the oxides of non-metals are called acidic oxides, while the oxides of metals (such as magnesium oxide from burning magnesium) are basic.

    sulphur burning

    Burning sulphur: the gas does nothing to dry litmus but turns moist blue litmus red.

  10. 10

    Question 10

    State two ways to prevent the rusting of iron.

    Medium
    2 marks
    Solve with AI
    Written solution

    Iron rusts only when both air (oxygen) and moisture reach its surface, so each method works by keeping them away from the iron.

    1. Painting, oiling or greasing: a coat of paint, oil or grease covers the iron surface and keeps air and moisture from reaching it, so rusting cannot begin. (Iron gates, railings and machine parts are protected this way.)

    2. Galvanising: the iron or steel is coated with a thin layer of zinc. The zinc coat keeps air and moisture away, and a galvanised article stays protected against rusting even if the zinc coating is broken in places.

    Other methods given in the book are chrome plating, anodising and making alloys, such as stainless steel (iron mixed with nickel and chromium), which does not rust.

    rusting experiment

    Iron rusts only when both air and water reach it, which is what every method of prevention works against.

  11. 11

    Question 11

    What type of oxides are formed when non-metals combine with oxygen?

    Medium
    2 marks
    Solve with AI
    Written solution

    Non-metals combine with oxygen to form oxides that are either acidic or neutral.

    Acidic oxides: most non-metal oxides are acidic. They dissolve in water to form acids, and the solution turns blue litmus red. For example, sulphur burns to give sulphur dioxide, which dissolves in water to form sulphurous acid:

    S(s)+O2(g)→SO2(g)\mathrm{S(s) + O_2(g) \rightarrow SO_2(g)} SO2(g)+H2O(l)→H2SO3(aq)\mathrm{SO_2(g) + H_2O(l) \rightarrow H_2SO_3(aq)}

    Carbon dioxide is another acidic oxide; its solution in water is carbonic acid.

    Neutral oxides: a few non-metal oxides, such as carbon monoxide (CO\mathrm{CO}), are neutral: they are neither acidic nor basic.

    This is the opposite of metals, whose oxides are basic (or, for aluminium and zinc, amphoteric).

    oxides acid base

    Basic, amphoteric and acidic oxides, and how each behaves with an acid and with a base.

  12. 12

    Question 12

    Give reasons

    (a) Platinum, gold and silver are used to make jewellery.

    (b) Sodium, potassium and lithium are stored under oil.

    (c) Aluminium is a highly reactive metal, yet it is used to make utensils for cooking.

    (d) Carbonate and sulphide ores are usually converted into oxides during the process of extraction.

    Medium
    4 marks
    Solve with AI
    Written solution

    (a) Platinum, gold and silver lie at the bottom of the reactivity series, so they are very unreactive. They do not react with air or water (silver and gold do not react with oxygen even at high temperatures), so they do not corrode and keep their shine for years. They are also lustrous, and highly malleable and ductile, so they can be beaten and drawn into fine, intricate designs. These properties make them ideal for jewellery.

    (b) Sodium, potassium and lithium are very reactive metals. Sodium and potassium react so vigorously with oxygen that they catch fire if kept in the open, and they react violently with water, giving off hydrogen and heat:

    2Na(s)+2H2O(l)→2NaOH(aq)+H2(g)+heat energy\mathrm{2Na(s) + 2H_2O(l) \rightarrow 2NaOH(aq) + H_2(g) + \text{heat energy}}

    Keeping them immersed in oil (kerosene) cuts them off from the air and moisture, which protects the metals and prevents accidental fires.

    (c) Aluminium is reactive, but at ordinary temperature its surface reacts with oxygen of the air to form a thin, tough layer of aluminium oxide:

    4Al(s)+3O2(g)→2Al2O3(s)\mathrm{4Al(s) + 3O_2(g) \rightarrow 2Al_2O_3(s)}

    This protective oxide layer prevents the metal underneath from further reaction, so the utensil does not corrode. Aluminium is also light and a good conductor of heat, which suits cooking utensils.

    (d) It is easier to obtain a metal from its oxide than from its sulphide or carbonate, because the oxide can be reduced to the metal with carbon. So the ore is first converted into the oxide: a sulphide ore is heated strongly in excess air (roasting), and a carbonate ore is heated strongly in limited air (calcination). For zinc:

    2ZnS(s)+3O2(g)→heat2ZnO(s)+2SO2(g)\mathrm{2ZnS(s) + 3O_2(g) \xrightarrow{\text{heat}} 2ZnO(s) + 2SO_2(g)} ZnCO3(s)→heatZnO(s)+CO2(g)\mathrm{ZnCO_3(s) \xrightarrow{\text{heat}} ZnO(s) + CO_2(g)}

    The zinc oxide is then reduced to zinc with carbon:

    ZnO(s)+C(s)→Zn(s)+CO(g)\mathrm{ZnO(s) + C(s) \rightarrow Zn(s) + CO(g)}

    extraction flow

    The three routes from ore to metal, and what decides which one is used.

  13. 13

    Question 13

    You must have seen tarnished copper vessels being cleaned with lemon or tamarind juice. Explain why these sour substances are effective in cleaning the vessels.

    Medium
    2 marks
    Solve with AI
    Written solution

    Copper slowly reacts with moist carbon dioxide in the air. It loses its shiny brown surface and gains a dull green coat of basic copper carbonate. This coating is basic in nature.

    Lemon juice and tamarind juice are sour because they contain acids (citric acid in lemon, tartaric acid in tamarind). When a tarnished vessel is rubbed with them, the acid reacts with the basic copper carbonate and neutralises it, forming a copper salt that dissolves in water, along with carbon dioxide and water:

    basic copper carbonate + acid → copper salt (soluble) + carbon dioxide + water

    The soluble salt is washed away with water, exposing the clean copper underneath, and the vessel shines again. A neutral substance such as plain water cannot remove the coating, which is why sour substances are used.

    photo corrode3

    Left: copper with its green coat of basic copper carbonate — the layer that sour juices dissolve. (Centre: tarnished silver; right: rusted iron.)

  14. 14

    Question 14

    Differentiate between metal and non-metal on the basis of their chemical properties.

    Medium
    4 marks
    Solve with AI
    Written solution

    Metals and non-metals can be told apart more clearly by their chemical properties than by their physical ones.

    Chemical propertyMetalsNon-metals
    Nature of oxideForm basic oxides; some, such as Na2O\mathrm{Na_2O} and K2O\mathrm{K_2O}, dissolve in water to give alkalis. Al2O3\mathrm{Al_2O_3} and ZnO\mathrm{ZnO} are amphoteric.Form acidic or neutral oxides; acidic ones such as SO2\mathrm{SO_2} dissolve in water to give acids. CO\mathrm{CO} is neutral.
    Reaction with waterReactive metals give hydrogen: Na, K and Ca with cold water, Mg with hot water, Al, Zn and Fe with steam.Do not react with water to give hydrogen.
    Reaction with dilute acidsMetals above hydrogen in the reactivity series displace hydrogen from dilute acids.Do not displace hydrogen from dilute acids.
    Formation of ionsLose electrons to form positive ions, e.g. Na+\mathrm{Na^+}, Mg2+\mathrm{Mg^{2+}}.Gain electrons (when reacting with metals) to form negative ions, e.g. Cl−\mathrm{Cl^-}, O2−\mathrm{O^{2-}}.
    Reaction with hydrogenCombining with hydrogen is not a typical reaction of metals.React with hydrogen to form hydrides, e.g. H2S\mathrm{H_2S}.

    Examples:

    2Mg(s)+O2(g)→2MgO(s)(basic oxide)\mathrm{2Mg(s) + O_2(g) \rightarrow 2MgO(s)} \quad \text{(basic oxide)} S(s)+O2(g)→SO2(g)(acidic oxide)\mathrm{S(s) + O_2(g) \rightarrow SO_2(g)} \quad \text{(acidic oxide)} Zn(s)+2HCl(aq)→ZnCl2(aq)+H2(g)\mathrm{Zn(s) + 2HCl(aq) \rightarrow ZnCl_2(aq) + H_2(g)}

    reactivity series

    The reactivity series: what each metal reacts with, and how it is obtained from its ore.

    oxides acid base

    Basic, amphoteric and acidic oxides, and how each behaves with an acid and with a base.

  15. 15

    Question 15

    A man went door to door posing as a goldsmith. He promised to bring back the glitter of old and dull gold ornaments. An unsuspecting lady gave a set of gold bangles to him which he dipped in a particular solution. The bangles sparkled like new but their weight was reduced drastically. The lady was upset but after a futile argument the man beat a hasty retreat. Can you play the detective to find out the nature of the solution he had used?

    Medium
    2 marks
    Solve with AI
    Written solution

    The solution was aqua regia (Latin for "royal water"): a freshly prepared mixture of concentrated hydrochloric acid and concentrated nitric acid in the ratio 3 : 1.

    Reasoning:

    • Gold lies at the very bottom of the reactivity series. It does not react with air or water, and it does not dissolve in hydrochloric acid or nitric acid on its own. Aqua regia is one of the few reagents that can dissolve gold.

    • When the bangles were dipped in aqua regia, a thin outer layer of gold dissolved into the solution. This removed the dull surface and exposed fresh gold underneath, so the bangles sparkled like new.

    • The gold that dissolved stayed in the man's solution, which is why the weight of the bangles fell so much. He could later recover that gold from the solution.

    reactivity series

    The reactivity series: gold sits at the bottom and is attacked by almost nothing except aqua regia.

  16. 16

    Question 16

    Give reasons why copper is used to make hot water tanks and not steel (an alloy of iron).

    Medium
    2 marks
    Solve with AI
    Written solution

    1. Copper does not react with water; iron does. Copper lies below hydrogen in the reactivity series and does not react with water at all, whether cold, hot or as steam. Steel is mostly iron, which reacts with steam:

    3Fe(s)+4H2O(g)→Fe3O4(s)+4H2(g)\mathrm{3Fe(s) + 4H_2O(g) \rightarrow Fe_3O_4(s) + 4H_2(g)}

    and also rusts when it is in contact with water and air together. A steel tank holding hot water would therefore corrode and leak over time, and rust would get into the water, while a copper tank lasts.

    2. Copper is a better conductor of heat. Copper is one of the best conductors of heat, much better than steel, so water in a copper tank is heated quickly and evenly.

    Class 10 Chemistry Metals and Non-metals

    Iron needs steam to react, but copper does not react with water in any form.

Inside Ch 3

What Class 10 Science Ch 3 covers

The sections of the chapter, in the order the book takes them. Every question above comes from one of these.

  1. 01Physical Properties Of Metals And Non-Metals
  2. 02Chemical Reactions Of Metals
  3. 03Ionic Compounds
  4. 04Extraction Of Metals
  5. 05Corrosion
  6. 06Comparison Between Metals And Non-Metals
From the board papers

Ch 3 in past CBSE papers

The same chapter as the board has actually asked it. These are worded differently from the textbook exercise, which is the point of reading them.

  1. 1

    Board paper question 1

    The products formed when Aluminium and Magnesium are burnt in the presence of air respectively are ?

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) Al3O4Al_3O_4 and MgO2MgO_2

    • (B) Al2O3Al_2O_3 and MgOMgO

      Correct
    • (C) Al3O4Al_3O_4 and MgOMgO

    • (D) Al2O3Al_2O_3 and MgO2MgO_2

    Option (B) is correct.

    Explanation: A metal burnt in air combines with oxygen to form its oxide. The formula follows from the charges of the ions: aluminium forms Al3+\mathrm{Al^{3+}} and oxygen forms O2−\mathrm{O^{2-}}, so two aluminium ions balance three oxide ions, giving Al2O3\mathrm{Al_2O_3}; magnesium forms Mg2+\mathrm{Mg^{2+}}, which balances one O2−\mathrm{O^{2-}}, giving MgO\mathrm{MgO}.

    4Al(s)+3O2(g)→2Al2O3(s)\mathrm{4Al(s) + 3O_2(g) \rightarrow 2Al_2O_3(s)} 2Mg(s)+O2(g)→2MgO(s)\mathrm{2Mg(s) + O_2(g) \rightarrow 2MgO(s)}

    Option (A) is wrong: Al3O4\mathrm{Al_3O_4} and MgO2\mathrm{MgO_2} do not balance the charges of the ions; three Al3+\mathrm{Al^{3+}} carry +9+9 against −8-8 from four oxide ions.

    Option (C) is wrong: MgO\mathrm{MgO} is right, but Al3O4\mathrm{Al_3O_4} is not a formula that balances the charges of Al3+\mathrm{Al^{3+}} and O2−\mathrm{O^{2-}}.

    Option (D) is wrong: Al2O3\mathrm{Al_2O_3} is right, but MgO2\mathrm{MgO_2} would need two oxide ions (−4-4) for one Mg2+\mathrm{Mg^{2+}} (+2+2).

    oxides acid base

    Basic, amphoteric and acidic oxides, and how each behaves with an acid and with a base.

  2. 2

    Board paper question 2

    The metals obtained from their molten chlorides by the process of electrolytic reduction are ?

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) Gold and silver

    • (B) Calcium and magnesium

      Correct
    • (C) Aluminium and silver

    • (D) Sodium and iron

    Option (B) is correct.

    Explanation: Metals high up in the reactivity series, such as sodium, magnesium and calcium, have more affinity for oxygen than carbon, so carbon cannot reduce their compounds. They are obtained by electrolytic reduction, and sodium, magnesium and calcium in particular are obtained by the electrolysis of their molten chlorides. The metal is deposited at the cathode and chlorine is liberated at the anode. Calcium and magnesium are both in this group.

    Option (A) is wrong: gold and silver are at the bottom of the reactivity series; gold is found free in nature, and neither needs electrolytic reduction.

    Option (C) is wrong: aluminium is obtained by the electrolytic reduction of aluminium oxide, not of its chloride, and silver is a low-reactivity metal.

    Option (D) is wrong: sodium is obtained this way, but iron is in the middle of the series and is obtained by reducing its oxide with carbon.

    extraction flow

    The three routes from ore to metal, and what decides which one is used.

  3. 3

    Board paper question 3

    The formation of magnesium oxide is correctly shown in option ?

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) Class 10 Chemistry Metals and Non-metals

      Correct
    • (B) Class 10 Chemistry Metals and Non-metals

    • (C) Class 10 Chemistry Metals and Non-metals

    • (D) Class 10 Chemistry Metals and Non-metals

    Option (A) is correct.

    Explanation: Magnesium (atomic number 12, electronic configuration 2, 8, 2) has 2 electrons in its outermost shell. Oxygen (atomic number 8, configuration 2, 6) has 6 and needs 2 more to complete its octet. So one magnesium atom transfers both its valence electrons to one oxygen atom:

    Mg→Mg2++2e−\mathrm{Mg \rightarrow Mg^{2+} + 2e^-} O+2e−→O2−\mathrm{O + 2e^- \rightarrow O^{2-}}

    Mg2+\mathrm{Mg^{2+}} (2, 8) and O2−\mathrm{O^{2-}} (2, 8) both now have the stable configuration of neon, and the two oppositely charged ions are held together by electrostatic attraction in magnesium oxide, Mg2+O2−\mathrm{Mg^{2+}O^{2-}}. In the correct sketch the oxide ion shows eight outer electrons, six of its own and the two received from magnesium, with a charge of 2−2-.

    Option (B) is wrong: it gives magnesium only one valence electron and transfers just one, forming Mg+\mathrm{Mg^{+}} and O−\mathrm{O^{-}}; neither ion then has a complete octet.

    Option (C) is wrong: it shares magnesium's two electrons between two oxygen atoms, so each oxygen gains only one electron and is left with seven, not an octet.

    Option (D) is wrong: two magnesium atoms would give away four electrons, but one oxygen atom can accept only two, and (Mg2+)2O2−\mathrm{(Mg^{2+})_2O^{2-}} carries an overall charge of 2+2+.

  4. 4

    Board paper question 4

    Aluminium powder is used in thermit welding because ?

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) Its reaction with iron is highly exothermic.

    • (B) When it is heated with iron (III) oxide, molten iron is obtained.

      Correct
    • (C) When it is heated with iron (III) oxide, molten aluminium oxide is obtained to join railway tracks.

    • (D) Its melting point is low as compared to iron and a molten alloy of iron and aluminium is formed on heating which is used to join railway tracks.

    Option (B) is correct.

    Explanation: Aluminium is more reactive than iron, so when aluminium powder is heated with iron(III) oxide it displaces iron from the oxide. This is the thermit reaction:

    Fe2O3(s)+2Al(s)→2Fe(l)+Al2O3(s)+heat\mathrm{Fe_2O_3(s) + 2Al(s) \rightarrow 2Fe(l) + Al_2O_3(s) + heat}

    The reaction is so highly exothermic that the iron is produced in the molten state. The molten iron runs into the gap and, on cooling, joins railway tracks or cracked machine parts.

    Option (A) is wrong: aluminium reacts with iron(III) oxide, not with iron metal; a metal does not displace another metal from that metal itself.

    Option (C) is wrong: aluminium oxide is formed, but it is the molten iron, not the aluminium oxide, that fills the joint and welds the tracks.

    Option (D) is wrong: no iron-aluminium alloy is made; aluminium is used because it is more reactive than iron and takes the oxygen from iron(III) oxide, not because of its melting point.

    thermite

    The thermit reaction: aluminium displaces iron, and the iron comes out molten.

  5. 5

    Board paper question 5

    Two metals zinc and tin are dissolved separately in definite proportions in molten copper (the primary metal) to obtain two different alloys respectively known as ?

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) Bronze and Brass

    • (B) Brass and Solder

    • (C) Brass and Bronze

      Correct
    • (D) Solder and Bronze

    Option (C) is correct.

    Explanation: An alloy is prepared by first melting the primary metal and then dissolving the other elements in it in definite proportions. With copper as the primary metal:

    • copper + zinc (Cu and Zn) gives brass;
    • copper + tin (Cu and Sn) gives bronze.

    Zinc is named first and tin second, so the two alloys, respectively, are brass and bronze.

    Option (A) is wrong: it has the order reversed; bronze is copper with tin, and brass is copper with zinc.

    Option (B) is wrong: solder is an alloy of lead and tin, with no copper in it, so copper with tin cannot be solder.

    Option (D) is wrong: copper with zinc is brass, not solder; solder is lead with tin.

    alloys

    Brass, bronze and solder — and what alloying changes about a metal.

  6. 6

    Board paper question 6

    Assertion (A): The metals high up in the reactivity series cannot be obtained from their compounds by heating with carbon.
    Reason (R): Displacement reactions can also be used to obtain metal.

    MCQEasyAsked 2025
    1 mark
    Solve with AI
    Answer
    • (A) Both Assertion (A) and Reason (R) are true and Reason (R) is the correct explanation of Assertion (A).

    • (B) Both Assertion (A) and Reason (R) are true, but Reason (R) is not the correct explanation of Assertion (A).

      Correct
    • (C) Assertion (A) is true, but Reason (R) is false.

    • (D) Assertion (A) is false, but Reason (R) is true.

    Option (B) is correct.

    Explanation: The Assertion is true. Metals high up in the reactivity series, such as sodium, magnesium, calcium and aluminium, cannot be obtained from their compounds by heating with carbon, because these metals have more affinity for oxygen than carbon. They are obtained by electrolytic reduction instead.

    The Reason is also true. Besides carbon, displacement reactions can be used to obtain metals: a highly reactive metal such as aluminium displaces a less reactive metal from its oxide, as in the thermit reaction, Fe2O3+2Al→2Fe+Al2O3+heat\mathrm{Fe_2O_3 + 2Al \rightarrow 2Fe + Al_2O_3 + heat}.

    But the Reason does not explain the Assertion. The Assertion is about why carbon fails for the most reactive metals; the Reason describes a different method used for metals in the middle of the series. The explanation of the Assertion is their greater affinity for oxygen.

    Option (A) is wrong: the Reason is true, but it says nothing about why carbon cannot reduce the oxides of highly reactive metals, so it is not the explanation.

    Option (C) is wrong: the Reason is a true statement; displacement reactions such as the thermit reaction are used to obtain metals.

    Option (D) is wrong: the Assertion is true; carbon cannot reduce the oxides of sodium, magnesium, calcium or aluminium.

    extraction flow

    The three routes from ore to metal, and what decides which one is used.

All 37 board paper questions for this chapter, solved the same way.

Common questions

Class 10 Science Ch 3 questions students ask

How many questions are there in Class 10 Science Ch 3?

16 questions. Every one is solved step by step on this page.

Are these Class 10 Chemistry question answers free?

Yes. Every question and its full working is free to read, with no account needed.

Can I download the Class 10 Chemistry Ch 3 solutions as a PDF?

There is no PDF to download. Every solution is on this page instead, which means it is searchable, always the current syllabus, and readable on a phone. Use your browser's print option if you want it on paper.