Option (A) is correct.
Explanation:
A plain circle has complete rotational symmetry (any turn about the centre works) and every diameter is a line of reflection symmetry. The ticks break most of these symmetries, and the long tick breaks even more.
Turns. A turn about the centre can only look the same if it sends the long tick back to the 12 o'clock position, because it is the only long tick. Turning by 30°,60°,…,330° moves the long tick to 1, 2, …, 11 o'clock, where a short tick used to be. So no turn smaller than a full turn of 360° works.
Mirror lines. A mirror line must also keep the long tick where it is, so it must pass through the 12 o'clock tick. The only such diameter is the line through 12 and 6. Folding along it sends the tick at 1 to 11, 2 to 10, 3 to 9, 4 to 8 and 5 to 7, and keeps 12 and 6 in place, so it is a line of symmetry. Every other line through the centre moves the long tick off the 12 position.
So the face has exactly 1 line of symmetry, and the smallest turn that works is a full turn of 360°.
Why the other options are wrong
- (B) 12 lines and a turn of 30° would be correct if all 12 ticks were identical. The longer tick at 12 has been ignored.
- (C) A turn of 30° moves the long tick to the 1 o'clock position, where a short tick was, so the face does not look the same. The long tick spoils every turn smaller than 360°.
- (D) The line through 12 and 6 passes through the long tick itself, so folding along it keeps the long tick in place and matches all the short ticks in pairs. There is one line of symmetry, not none.