(a)

Four readings lie on a straight line, but the one at 7.5×1014 Hz (1.30 V) lies well above it. The line through the others predicts 1.10 V there, so the reading is about 0.20 V too high.
A possible cause: the light at that setting was not purely 7.5×1014 Hz. If the filter let through a little light of higher frequency, those photons would eject faster electrons, and the stopping potential is set by the fastest electrons. A misread voltmeter is another possibility.
A brighter lamp cannot explain it: at a fixed frequency, more intense light gives more electrons (a larger current) but does not change their maximum kinetic energy, so V0 is independent of intensity.
(b) Using the end points of the good readings:
slope=(9.5−5.5)×10141.92−0.27=4.0×10141.65=4.13×10−15 V s
(a best-fit line through the four good points gives the same value). Einstein's equation, V0=ehν−eϕ0, shows that the slope is eh:
h=e×slope=1.6×10−19×4.13×10−15=6.6×10−34 J s
(c) Extend the line to V0=0. Using the first point:
ν0=ν−slopeV0=5.5×1014−4.13×10−150.27=5.5×1014−0.65×1014=4.85×1014 Hz
The line, extended back, cuts the V0 axis at −eϕ0:
eϕ0=slope×ν0=4.13×10−15×4.85×1014=2.00 V⇒ϕ0=2.0 eV
(d)
V0=4.13×10−15×1.0×1015−2.00=2.13 V
Light of 5.5×1014 Hz has photon energy 4.13×10−15×5.5×1014=2.27 eV, less than 2.50 eV. So it ejects no electrons from the second metal, whatever its intensity. (That metal's line would be parallel to this one, but shifted right to a threshold of 4.13×10−152.50=6.1×1014 Hz.)