(a) The wavefront leaving the object is a sphere centred on the object. The lens delays the centre of the wavefront most, because the glass is thickest there, and the edges least. The emerging wavefront is a sphere centred on the image. Since each ray runs between the same two wavefronts, every ray takes the same time, and all of them arrive at the image in phase, reinforcing one another. The image is the point where they all meet in step.
(b) Glass of thickness t takes as long as an air path nt, which is (n−1)t longer than the same thickness of air. The central ray's extra delay over the edge ray is therefore
(n−1)(5.0−1.0)=0.5×4.0=2.0 mm
So the edge ray's total geometric path (glass plus air) must be 2.0 mm longer than the central ray's. (Counting only the parts in air, it must be 1.5×4.0=6.0 mm longer, because the central ray spends 4.0 mm more of its path in glass.) This is just what the lens geometry provides: the edge ray travels a longer, slanting path.

(c) The waves would arrive with different phases and partly cancel, so the "image" would be blurred or weak. A good lens is one shaped so that the optical paths are equal.