Concept used — terminal voltage of a cell with internal resistance
When a battery of emf E and internal resistance r delivers a current I, part of the emf is used up inside the battery, so the voltage at its terminals is
V=E−Ir
Everything connected across the terminals, including the headlights, gets this voltage V. A fixed resistance R with voltage V across it uses power P=RV2.
Given: E=12 V, r=0.05 Ω, starter-motor current I=100 A.
(a) Terminal voltage while the starter runs
Neglecting the small headlight current, the battery current is the starter's 100 A:
V=E−Ir=12−(100)(0.05)=12−5=7 V
Answer: about 7 V.
(b) Factor by which the headlight power falls
Step 1 — Normal headlight voltage. With only the headlights on, the battery current is small, so the drop Ir is small and the headlights get very nearly the full emf. Treating the headlight current as negligible, as part (a) does, the normal headlight voltage is about 12 V.
Step 2 — Compare powers. The headlight resistance Rh is fixed, so P∝V2:
PP′=V2/RhV′2/Rh=(127)2=14449≈0.34
Answer: the headlight power falls to about one-third (a factor of about 0.34) of its normal value, so the headlights dim noticeably.

The starter's large current passes through the internal resistance r, and the terminal voltage V across the headlights drops.
(c) Why the effect is small with only the headlights on
The voltage lost inside the battery is Ir, which is proportional to the current. Headlights draw far less current than the starter motor. Taking a headlight current of about 10 A (an illustrative value; the question does not give it), the battery loses only
Ir=10×0.05=0.5 V
leaving about 11.5 V at the terminals, against 5 V lost when the starter draws 100 A. The internal resistance matters only when the current is large.
Note: parts (a) and (b) use one consistent model, in which the headlight current is neglected both before and during starting. That gives 12 V normally, 7 V while starting, and a power factor of about 0.34.