(a) If hydrogen were present as H− (oxidation state −1):
- in Fe3H, each Fe would be +31;
- in TiH1.7, Ti would be +1.7.
Neither is a possible oxidation state of a metal (and taking H as +1 gives −31 and −1.7, which is worse). The formulas are fixed by how many holes in the metal lattice happen to be filled, not by valency. Such compounds are interstitial and usually non-stoichiometric; they are neither typically ionic nor covalent.
(b) The small carbon atoms sit in the holes between the titanium atoms and bond to the metal atoms around them. This locks the metal layers in place, so they can no longer slide over one another easily: the solid becomes very hard and needs more energy to melt, giving a higher melting point than pure Ti. The metal lattice itself is still there, with its delocalised electrons, so the compound retains metallic conductivity.

(c) In carbon steel, some carbon atoms occupy the holes in the iron lattice, as in an interstitial compound. Pure iron is malleable because its layers of atoms can slide past each other when hammered. The trapped carbon atoms pin the layers and resist this sliding, so the steel is harder but can no longer be bent or beaten into shape as easily.