(a) Rate constant at the end and rate at the half-way point
Using logk1k2=2.303REa(T11−T21) with 2.303REa=2.303×8.31480000=4178 K:
At 340 K, 3001−3401=3.922×10−4 K−1:
logk300k340=4178×3.922×10−4=1.6385⇒k300k340=43.5
At 320 K, 3001−3201=2.083×10−4 K−1:
logk300k320=4178×2.083×10−4=0.8704⇒k300k320=7.42
The reaction is first order, so rate =k[A], and at the half-way point [A]=21[A]0:
initial raterate at half-way=k300k320×[A]0[A]0/2=7.42×0.5=3.71
Even with half of A gone, the reaction is running 3.71 times faster than at the start. In a vessel held at 300 K it would be running at half the initial rate.
(b) Why it speeds up, and why cooling matters
Each molecule that reacts releases heat, which raises the temperature. The higher temperature increases k steeply (the fraction of molecules with energy ≥Ea grows exponentially), so A reacts faster, releasing heat faster still. This positive feedback outweighs the fall in [A] until most of A is used up: the rate keeps rising until about 72% of A has reacted (near 329 K), where it is about 4.6 times the initial rate.
In a real plant the adiabatic temperature rise is often far larger than 40 K, so the same feedback can make the temperature and rate climb out of control (thermal runaway): the mixture may boil, the pressure may burst the vessel, and side reactions may start. Cooling removes the heat as fast as it is produced, holding T and therefore k steady, so the rate simply falls as A is used up.
