(i) — (B). For a first-order reaction ln[R]=ln[R]0−kt, so the slope of each line is −k. The line for P is steeper, so kP>kQ and P is destroyed faster. The height of a line only reflects how much dye is present at that moment, so (A) and (C) judge by the wrong feature. (D) is wrong because a first-order half-life, 0.693/k, depends on k, and the two k values differ.
(ii) Read two points on each line from the axis values.
Dye P: ln[P] falls from 3.689 at t=0 to 2.303 at t=20 min:
kP=−slope=20 min3.689−2.303=201.386=0.0693 min−1,t1/2=0.06930.693=10.0 min
Dye Q: ln[Q] falls from 2.996 at t=0 to 2.303 at t=30 min:
kQ=30 min2.996−2.303=300.693=0.0231 min−1,t1/2=0.02310.693=30.0 min
So kP= 0.0693 min⁻¹ (t1/2= 10.0 min) and kQ= 0.0231 min⁻¹ (t1/2= 30.0 min). P reacts three times as fast as Q.
(iii) The concentrations are equal where the two lines cross:
3.689−0.0693t=2.996−0.0231t⇒0.0462t=0.693⇒t=15.0 min
15 min is 1.5 half-lives of P, so
[P]=[Q]=40×2−1.5=40×0.354=14.1 μmol L−1
(Check with Q: 15 min is half a half-life, 20×2−0.5=14.1.) The lines cross at 15.0 min, when both dyes are at 14.1 μmol L⁻¹.

(iv) — (D). Subtracting the two straight lines gives another straight line:
ln[Q][P]=ln2040−(kP−kQ)t=0.693−0.0462t
The ratio therefore halves every 0.693/0.0462=15 min: 2 at the start, 1 at 15 min, 0.5 at 30 min and 0.25 at 45 min. (A) forgets that the ratio starts at 2, not 1; (B) is the ratio at 30 min; (C) is true only at the crossing point, after which P keeps falling faster than Q.