(i) For P, doubling [R]0 doubles t1/2 (t1/2∝[R]0). This matches t1/2=2k[R]0, so P is zero order. For Q, t1/2 is the same whatever [R]0 is. This matches t1/2=k0.693, so Q is first order.
(ii) For P: k=2t1/2[R]0=2×50.00.10=1.0×10−3 mol L−1 s−1 (the 0.20 and 0.40 M runs give the same value).
For Q: k=t1/20.693=138.60.693=5.00×10−3 s−1
The units differ because the order differs: a zero-order k has the units of a rate, and a first-order k has units of time−1.
(iii) — (C). P (zero order): [R]=[R]0−kt=0.40−1.0×10−3×200=0.20 M. Q (first order): [R]=0.40e−5.00×10−3×200=0.40e−1.00=0.147 M. (A) wrongly treats 200 s as one half-life for Q as well; (B) swaps the two; (D) uses P's half-life of 100 s from the 0.20 M run, but P's half-life depends on the starting concentration.
(iv) 90% used up means [R]=0.040 M.
P (zero order):
t=k[R]0−[R]=1.0×10−30.40−0.040=360 s
Q (first order):
t=k2.303log0.0400.40=5.00×10−32.303×1=461 s
P finishes first, even though its first half-life from 0.40 M (200 s) is longer than Q's (138.6 s). A zero-order reaction keeps going at the same rate right to the end, whereas a first-order reaction slows down as [R] falls.
