Read the passage and answer the questions that follow.
Steel ships sit for years in sea water, which is a good electrolyte and contains dissolved oxygen. To stop the hull from rusting, blocks of zinc are bolted to the steel below the waterline. The zinc is electrically connected to the hull, so zinc and steel together form a galvanic cell in which the zinc slowly dissolves while the steel is protected. This is called sacrificial (cathodic) protection. The zinc blocks must be replaced at regular dry-dock visits.

A small vessel carries 60 kg of zinc anodes. Measurements show that a steady protective current of 3.0 A flows from the zinc to the hull. The anodes are replaced when 85% of their mass has been used up.
(V): , , , , . Molar masses: Zn 65.4, Mg 24.3 g mol⁻¹; ; 1 year h.
(i) Which metal could not be used as a sacrificial anode for the steel hull? (A) Zn (B) Mg (C) Al (D) Cu [1]
(ii) Write the half-reaction at the zinc anode and the half-reaction that takes place on the hull surface in (neutral) sea water. [1]
(iii) Calculate how many years the zinc anodes last before they must be replaced. [1]
(iv) Calculate how long the same mass of magnesium anodes would last in theory. In practice, magnesium anodes in sea water wear out much faster than this. Suggest why, using the values. [1]


