Confirming your payment

Skip to content

Competency-Based Questions (CBQ) · Question 34 of 80

A mechanic recharges a flat 12 V car battery, which is six lead storage cells in series, using a DC charger.

Question 345 marksEasy

A mechanic recharges a flat 12 V car battery, which is six lead storage cells in series, using a DC charger. The discharge reaction in each cell is

Pb(s)+PbO2(s)+2H2SO4(aq)→2PbSO4(s)+2H2O(l)Ecell∘=2.05 V\text{Pb(s)} + \text{PbO}_2(\text{s}) + 2\text{H}_2\text{SO}_4(\text{aq}) \rightarrow 2\text{PbSO}_4(\text{s}) + 2\text{H}_2\text{O(l)} \qquad E^\circ_\text{cell} = 2.05\ \text{V}

The charger passes 10.0 A for 5.00 h, but afterwards the battery delivers only 45.0 A h before it is flat again. Near the end of charging, the unused charge electrolyses the water in the acid ("gassing"). (F=96500 C mol−1F = 96500\ \text{C mol}^{-1}; molar volume at STP = 22.4 L mol⁻¹; H2O\text{H}_2\text{O} = 18.0 g mol⁻¹)

(a) Write the reactions that occur during charging at the plate joined to the charger's negative terminal and at the plate joined to its positive terminal. Which of these plates was the anode while the battery was discharging?

(b) Using ΔrG∘\Delta_r G^\circ, explain why the charger must apply more than about 12.3 V across the battery.

(c) Calculate the charge efficiency, and the volumes of hydrogen and oxygen (at STP) given off by the whole battery during gassing.

(d) Use your answer to (c) to explain why the charging area must be well ventilated and kept free of sparks, and why distilled water must be added to such batteries from time to time.