(a) At the anode, the metals that are easiest to oxidise are those with the lowest (most negative) E∘. Zn (−0.76 V) and Fe (−0.44 V) are oxidised more easily than Cu (+0.34 V), so they dissolve along with the copper:
Zn→Zn2++2e−,Fe→Fe2++2e−,Cu→Cu2++2e−
Ag (+0.80 V) and Au (+1.40 V) are much harder to oxidise than Cu. At the low voltage used they are not oxidised; as the copper around them dissolves they fall to the bottom as anode mud.
At the cathode, the ion that is easiest to reduce (highest E∘) is reduced. Of the ions in solution, Cu2+ (+0.34 V) is far easier to reduce than Fe2+ (−0.44 V) or Zn2+ (−0.76 V). Only copper deposits; Zn2+ and Fe2+ stay dissolved. So the cathode grows as pure copper.
(b) Charge passed:
Q=10.0×5.00×3600=1.80×105 C,n(e−)=965001.80×105=1.865 mol
m(Cu)=21.865×63.5=59.2 g
(c) One gram of anode uses up electrons only through its Cu, Zn and Fe (Ag and Au do not react):
63.50.970×2+65.40.015×2+55.80.010×2=0.03055+0.00046+0.00036=0.03137 mol e− per g
Loss in anode mass=0.031371.865=59.5 g
Anode mud (Ag + Au)=0.005×59.5=0.30 g
(d) Copper entering the solution from the anode =0.970×59.5=57.7 g, but copper leaving the solution at the cathode =59.2 g.
Net copper removed from the bath=59.2−57.7=1.5 g (≈0.024 mol of Cu2+)
The reason: part of the charge at the anode is carried by Zn and Fe, which dissolve instead of copper, while all the charge at the cathode deposits copper. So Cu2+ slowly falls and Zn2+ and Fe2+ build up. Refineries must regularly replace part of the electrolyte to keep enough Cu2+ present; otherwise, once Cu2+ runs low, other reductions would begin at the cathode and the copper would no longer be pure.
