Read the following passage and answer the questions:
Petroleum refining is one of the largest industrial applications of fractional distillation. Crude oil is a complex mixture of hydrocarbons with a wide range of boiling points. In the fractionating column, the crude oil is heated at the base and vapours rise through the column, condensing at different levels depending on their boiling points. Lighter fractions (lower boiling point) condense near the top; heavier fractions condense near the bottom. A simplified model uses two volatile components: hexane (C₆H₁₄, mm Hg) and heptane (C₇H₁₆, mm Hg), which form a nearly ideal solution. (These are simplified model values at one fixed temperature; real vapour pressures of hexane and heptane at 333 K are much higher, about 570 and 210 mm Hg.) A feed mixture has .
(i) Calculate the total vapour pressure of the feed mixture and the mole fraction of hexane in the first vapour produced.
(ii) This first vapour is condensed and re-vaporised. Calculate the new total vapour pressure and the mole fraction of hexane in the second vapour.
(iii) After two distillation steps, compare the mole fraction of hexane in the liquid (0.40 → step 1 vapour → step 2 vapour) and comment on how fractional distillation progressively purifies the more volatile component.
(iv) In reality, crude oil contains hundreds of components and is not an ideal mixture. Give two reasons why real petroleum fractions deviate from the ideal Raoult's Law model used above.

