Opening your dashboard
Class 12 Biology Chapter 9 Biotechnology - Principles And Processes: Competency-Based Questions (CBQ)
80 questions on Chapter 9, each worked through on its own page with the AI tutor. Class 12 Biology, CBSE 2026-27.
80 questions
1–5 marks · Mixed difficulty
- 11 mark
Question 1
A breeder crosses a high-yielding rice variety with a wild rice that resists a disease. The offspring resist the disease, but many also inherit poor grain quality from the wild parent. How would genetic engineering avoid this problem?
- 21 mark
Question 2
A piece of foreign DNA is introduced into a bacterium but does not become part of any chromosome, and it carries no origin of replication. What is most likely to happen to it as the bacterium divides?
- 31 mark
Question 3
Which option correctly sorts these laboratory tasks into genetic engineering (GE) and bioprocess engineering (BE)?
I. Joining a gene of interest into a plasmid with ligase
II. Keeping a 1000-litre culture vessel free of contaminating microbes
III. Introducing recombinant DNA into a host cell
IV. Growing only the desired recombinant cells in large quantities to manufacture a vaccine
- 41 mark
Question 4
In forming recombinant DNA: (1) the vector and the foreign DNA are cut with a restriction enzyme; (2) the cut fragments are separated by gel electrophoresis; (3) the fragments are joined together; (4) the recombinant DNA is introduced into a host cell. At which step is DNA ligase required?
- 51 mark
Question 5
BamH I and Hind III are two restriction enzymes. Using NCERT's naming convention, which statement about them is correct?
- 61 mark
Question 6
A 1000 bp linear DNA molecule is treated separately with two enzymes. Enzyme X makes the molecule gradually shorter from both ends. Enzyme Y converts it into exactly two fragments, of 400 bp and 600 bp. Which conclusion is correct?
- 71 mark
Question 7
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): The stickiness of the ends produced by restriction enzymes facilitates the action of DNA ligase.
Reason (R): Sticky ends form hydrogen bonds with their complementary cut counterparts.
- 81 mark
Question 8
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): DNA must be purified, free of other macromolecules, before it is cut with a restriction enzyme.
Reason (R): Restriction enzymes cut RNA and proteins more readily than DNA.
- 91 mark
Question 9
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): If a vector's only marker is an ampicillin-resistance gene, and the foreign DNA is inserted elsewhere, plating on ampicillin cannot tell recombinant cells from non-recombinant ones.
Reason (R): Cells carrying the vector with the insert and cells carrying the vector without it both have ampR, so both survive on ampicillin.
- 101 mark
Question 10
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): Bacteria are treated with a specific concentration of a divalent cation, such as calcium, before transformation.
Reason (R): Calcium ions cut the recombinant DNA into smaller pieces, which pass through the membrane more easily.
- 111 mark
Question 11
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): In PCR, a segment of DNA can be amplified to approximately a billion copies.
Reason (R): The primers used in PCR are small, chemically synthesised oligonucleotides.
- 123 marks
Question 12
A student lists the steps of recombinant DNA technology in a jumbled order:
- ligation of the DNA fragment into a vector
- isolation of DNA
- culturing the host cells in a medium at a large scale
- fragmentation of DNA by restriction endonucleases
- transferring the recombinant DNA into the host
- isolation of a desired DNA fragment
- extraction of the desired product
Arrange them in the correct order, and justify why step 4 must come before step 6.
- 133 marks
Question 13
A student runs a gel electrophoresis to find a 1500 bp fragment for cloning, but forgets to load a DNA ladder (size markers) in one lane.
(a) Why will she find it hard to decide which band is the 1500 bp fragment?
(b) After identifying the right band in a repeat run, what must she do to obtain the fragment for ligation?
(c) Why is the fragment she obtains suitable for joining to a cloning vector?
- 143 marks
Question 14
Only a trace of DNA is recovered from a sample, far too little to study.
(a) Which technique can make enough copies of one chosen gene from it?
(b) Name the three things added to the DNA for this technique.
(c) Why can this technique copy the gene even though no living cell is present in the tube?
- 153 marks
Question 15
A scientist transfers a plasmid carrying an ampicillin-resistance gene into E. coli, and spreads the cells on agar containing ampicillin.
(a) Which cells will grow, and which will die? Explain.
(b) What is the ampicillin-resistance gene called in this role?
- 162 marks
Question 16
During an experiment to grow a recombinant bacterium in a large vessel, a technician forgets to maintain sterile conditions. What problems may arise, and why does NCERT treat sterility as a core part of biotechnology?
- 173 marks
Question 17
A scientist wants to obtain as many copies of a gene as possible from each bacterial cell. She can clone it into a plasmid present at 1–2 copies per cell, a plasmid present at 15–100 copies per cell, or a bacteriophage vector. Which choice gives the most copies, and why? What sequence in the vector controls the copy number?
- 184 marks
Question 18
Ria ligates a foreign gene into the BamH I site of the plasmid pBR322, which lies within the tetracycline-resistance gene (tetR), and transforms E. coli. She plates the cells on ampicillin (plate 1), then transfers the colonies to a plate with ampicillin and tetracycline (plate 2).

(a) Which enzyme joined the foreign gene to the plasmid?
(b) Which colonies on plate 1 are the recombinants? Explain using plate 2.
(c) What is this loss of tetracycline resistance called?
- 192 marks
Question 19
A PCR machine is set to repeat three temperatures in each cycle: a high temperature, then a lower one, then a moderate one. Explain what happens at each, and why the high temperature must come first.
- 203 marks
Question 20
Making curd, bread or wine uses microbes. Would you call these processes biotechnology? How does NCERT's restricted use of the term differ? Give the European Federation of Biotechnology's definition.
- 211 mark
Question 21
Which of these double-stranded sequences is a palindrome in the sense used for restriction sites, reading the same on both strands in the 5'→3' direction?
- 221 mark
Question 22
An alien piece of DNA is linked with an origin of replication and multiplies in the host into many identical copies. NCERT calls this process:
- 231 mark
Question 23
The Ti plasmid of Agrobacterium tumefaciens is modified before it is used as a cloning vector for plants. What is the purpose of this modification?
- 241 mark
Question 24
In Cohen and Boyer's experiment, the recombinant DNA multiplied in E. coli "using the new host's DNA polymerase enzyme". Suppose it were introduced into a host whose DNA polymerase could not act on it. What would happen?
- 251 mark
Question 25
A banana variety is propagated only asexually. Farmers want it to gain a disease-resistance gene from another plant. Why can't asexual propagation alone achieve this, and what can?
- 261 mark
Question 26
Which option correctly matches the contributions that together founded biotechnology?
- 271 mark
Question 27
A recombinant cell line needs a very high supply of oxygen. Which bioreactor from NCERT's Figure 9.7 is better suited, and why?
- 281 mark
Question 28
A colony is confirmed to carry the recombinant plasmid with the gene of interest, but no recombinant protein is detected in the culture. What must the scientist do before scaling up?
- 291 mark
Question 29
NCERT says restriction endonucleases were first isolated as enzymes "responsible for restricting the growth of bacteriophage in Escherichia coli". A phage injects its DNA into an E. coli cell that contains a restriction endonuclease recognising a site present in the phage DNA. What is the most likely result?
- 301 mark
Question 30
Lane 1 holds undigested linear DNA. Lanes 2 and 3 hold the same DNA digested with two different restriction enzymes.

Which lane contains the smallest DNA fragment, and why?
- 311 mark
Question 31
In which case is the protein produced a "recombinant protein", in NCERT's sense?
- 321 mark
Question 32
A bioreactor maintains its conditions automatically, yet it still has sampling ports. What are they for?
- 331 mark
Question 33
What are the three basic steps in genetically modifying an organism, in the correct order?
- 341 mark
Question 34
Plasmid DNA and chromosomal DNA are both present in a bacterial cell. Which property makes a plasmid, and not the chromosome, useful as a cloning vector?
- 351 mark
Question 35
A scientist wants to open a circular plasmid at one point so that a gene can be inserted. Which kind of enzyme can do this?
- 361 mark
Question 36
A sample contains plant leaf cells and bacterial cells. It is treated with cellulase only, then with ribonuclease and protease, and chilled ethanol is added. Whose DNA will mainly be obtained?
- 371 mark
Question 37
In isolating DNA, why must the sample be treated with protease, even though only DNA is wanted?
- 381 mark
Question 38
At the end of a DNA isolation, fine white threads appear when chilled ethanol is added, and they can be wound out on a glass rod. What do the threads show?
- 391 mark
Question 39
When a restriction endonuclease finds its recognition sequence, where exactly does it cut the DNA?
- 401 mark
Question 40
Which of these does NCERT NOT list among the techniques included under biotechnology?
- 411 mark
Question 41
Enzyme P recognises a 4-base-pair sequence; enzyme Q recognises a 6-base-pair sequence, like Hind II. Assuming the four bases occur at random and equally often, how often would each site be expected to occur in a long DNA molecule, and which enzyme would give more fragments?
- 421 mark
Question 42
A PCR tube starts with 3 molecules of double-stranded target DNA. Assuming every cycle doubles the number of target molecules, how many double-stranded copies will there be after 5 cycles?
- 431 mark
Question 43
PCR amplifies a DNA segment "approximately billion times". Starting from one double-stranded molecule, and assuming perfect doubling every cycle, what is the smallest number of cycles that gives more than one billion (10⁹) copies? (2¹⁰ ≈ 1000)
- 441 mark
Question 44
A restriction enzyme has exactly two recognition sites in each of two DNA molecules: a linear DNA and a circular plasmid. How many fragments will each give when completely digested?
- 451 mark
Question 45
A student makes E. coli competent with calcium chloride, mixes the cells with recombinant DNA, and keeps the tube on ice throughout before plating. Very few transformants appear. What most likely went wrong?
- 461 mark
Question 46
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): If a foreign gene is inserted at the Pst I site of pBR322, the recombinant E. coli cells become sensitive to ampicillin but stay resistant to tetracycline.
Reason (R): The Pst I site lies within the ampicillin-resistance gene (ampR) of pBR322, and the insertion inactivates it.

- 471 mark
Question 47
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): Chilled ethanol is added at the end of DNA isolation.
Reason (R): Chilled ethanol digests the proteins that are bound to DNA.
- 481 mark
Question 48
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): Inserting foreign DNA into the rop gene of pBR322 could affect the replication of the plasmid.
Reason (R): rop codes for the proteins involved in the replication of the plasmid.

- 491 mark
Question 49
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): In gel electrophoresis, DNA samples are loaded into wells at the anode (positive) end of the gel.
Reason (R): DNA fragments are negatively charged, so they move towards the anode under an electric field.
- 501 mark
Question 50
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): A continuous culture system produces a larger biomass and higher yields of the desired protein.
Reason (R): Draining used medium from one side while adding fresh medium from the other keeps the cells in their physiologically most active log (exponential) phase.
- 515 marks
Question 51
A researcher uses vector X to insert a foreign gene of 1.5 kb. The map is shown below.

The vector has one EcoR I site, inside the chloramphenicol-resistance gene (CmR), and two Sac I sites, on either side of the neomycin-resistance gene (NeoR). It also carries a gene for green fluorescent protein (gfp), which makes the cells glow. The foreign gene can be cut out with either enzyme.
(a) Which possible products could form after ligation if the researcher uses (i) Sac I, and (ii) EcoR I?
(b) Which enzyme is better for making sure the foreign gene has been inserted, and why?
(c) If the intact 6205 bp vector and the 1.5 kb foreign gene are loaded together in an agarose gel, which will form the band closer to the well? Why?
- 525 marks
Question 52
A recombinant bacterium is grown in a bioreactor to make a protein. Its growth curve is shown, with four phases labelled A to D: A is the lag phase, B the log (exponential) phase, C the stationary phase and D the death phase.

(a) In which phase are the cells physiologically most active? What is happening to the number of cells in that phase, as shown by the curve?
(b) The operator harvests the culture at the end of phase A. Why would the yield of protein be poor?
(c) The culture reaches phase D. Suggest one way to restart production.
(d) The vessel and medium are sterilised before use. Why are the recombinant bacteria not killed by this?
- 533 marks
Question 53
Give three reasons, from what you have learnt in this chapter, why bacteria such as E. coli are a convenient choice for producing many recombinant proteins.
- 544 marks
Question 54
(a) Agrobacterium tumefaciens is "a pathogen of several dicot plants". Which piece of DNA does it deliver, and what does that DNA do to the plant cell?
(b) Why is the disarmed Ti plasmid a good choice for a dicot crop such as tomato, but less suitable for a monocot crop such as wheat?
(c) Which NCERT method would you use instead for wheat, and why?
(d) Predict what would happen if an unmodified Ti plasmid were used to transfer a useful gene into tomato.
- 553 marks
Question 55
pBR322 was constructed artificially from three sources: the tetracycline-resistance gene of one plasmid, the ampicillin-resistance gene of another, and the replication elements of a third. Describe the two enzymatic steps that would have been needed, and name the enzyme for each.
- 564 marks
Question 56
A gene is ligated into the BamH I site of pBR322 (within tetR), and E. coli is transformed. 500 colonies grow on an ampicillin plate. When they are transferred to a plate containing both ampicillin and tetracycline, 440 colonies grow.
(a) How many colonies are recombinant? What percentage of the transformants is this?
(b) Explain why the recombinants fail on the second plate while the others grow.
(c) What would happen to all 500 colonies on a plate containing tetracycline alone? Explain.
(d) Why does NCERT call this method "cumbersome"?
- 575 marks
Question 57
(a) "Preferably, the gene of interest and the vector are cut with the same restriction enzyme." Is this true? Give a reason.
(b) After the cut gene and vector are mixed with ligase, list all the possible products.
(c) The vector carries an ampicillin-resistance gene. State two kinds of host cell that would grow on an ampicillin medium, and one kind that would not.
- 583 marks
Question 58
A laboratory must introduce recombinant DNA into three kinds of target:
- (i) E. coli cells;
- (ii) the nucleus of a fertilised animal egg cell;
- (iii) cells of a dicot crop plant.
For each, name the method NCERT describes as suitable, and explain briefly how it works.
- 594 marks
Question 59
Vectors carrying foreign DNA must be forced into host cells made competent to take them up. The cells are treated with calcium chloride and incubated with the DNA on ice, then placed briefly at 42 °C and put back on ice.
(a) Why can DNA not simply pass through the cell membrane, as oxygen does?
(b) Why is this treatment not needed when DNA is introduced into an animal cell by micro-injection?
(c) Predict the result of two separate mistakes: (i) the calcium treatment is skipped; (ii) the DNA is added only after the heat shock, instead of before it.
- 605 marks
Question 60
A PCR programme runs these steps in each cycle:
- Step 1: 94 °C for 1 minute
- Step 2: 50–65 °C for 30 seconds
- Step 3: 72 °C for 1 minute
(a) Give two reasons why PCR can be a better way to obtain many copies of a gene than cloning it in a plasmid inside bacteria.
(b) Step 2 is run at a lower temperature than steps 1 and 3. Why must the mixture be cooled for this step?
(c) Predict the result if step 1 were run at 72 °C instead of 94 °C.
(d) Where in recombinant DNA technology can PCR be useful?
- 611 mark
Question 61
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): The sequence 5'-GATTAG-3' reads the same forwards and backwards along one strand, like the word "MALAYALAM", yet it is not a palindrome of the kind restriction enzymes recognise; the sequence 5'-GGATCC-3' does not read the same backwards along one strand (it gives CCTAGG), yet it is such a palindrome.
Reason (R): A palindrome in DNA is a sequence of base pairs that reads the same on the two strands when the orientation of reading is kept the same.
- 621 mark
Question 62
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): Retroviruses can never be used as vectors to deliver genes into animal cells, because they cause cancer.
Reason (R): Retroviruses in animals have the ability to transform normal cells into cancerous cells.
- 631 mark
Question 63
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): If PCR is run with only one of the two primers, the target is not amplified exponentially.
Reason (R): With a single primer, only one of the two template strands is copied in each cycle, so the number of target copies does not double.
- 641 mark
Question 64
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): Chitinase is used to release DNA from fungal cells, but lysozyme is used for bacteria.
Reason (R): Bacterial cell walls are made of chitin.
- 651 mark
Question 65
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): PCR amplifies only the chosen region of a DNA molecule, not the whole genome.
Reason (R): The DNA polymerase itself recognises the target sequence and copies only that region.
- 661 mark
Question 66
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): A restriction enzyme that also has a recognition site inside the gene of interest is unsuitable for cutting out that gene for cloning.
Reason (R): Restriction enzymes belong to a larger class of enzymes called nucleases.
- 671 mark
Question 67
Given below are two statements: Assertion (A) and Reason (R).
Assertion (A): In an agarose gel, a 500 bp fragment moves farther than a 3000 bp fragment.
Reason (R): Agarose is a natural polymer extracted from seaweeds.
- 683 marks
Question 68
A 6 kb circular plasmid is digested, and the fragments are separated by gel electrophoresis.
Enzyme(s) used Fragments seen EcoR I alone 6 kb BamH I alone 4 kb and 2 kb EcoR I + BamH I 3 kb, 2 kb and 1 kb (a) How many sites does each enzyme have in the plasmid? Explain.
(b) Where does the EcoR I site lie, relative to the BamH I fragments? Explain using the double digest.
(c) The researcher wants to insert a gene into this plasmid. Which enzyme would be better for opening it, and why?
- 693 marks
Question 69
You are asked to design a new plasmid vector for cloning genes in E. coli. It must (1) make many copies of the cloned gene, (2) let you pick out cells that took up the plasmid, and (3) let you tell cells with an insert from cells without one.
(a) Name the feature you would include for each requirement, and explain how it works.
(b) Where exactly would you place the cloning site, and why?
(c) Why must the cloning site be unique in the whole plasmid?
- 704 marks
Question 70
A student must isolate pure DNA from a leaf, for cutting with a restriction enzyme.
(a) Write the steps she should follow, naming the enzyme used at each step and its purpose.
(b) She forgets the ribonuclease. What will contaminate her sample?
(c) Her purified leaf DNA is cut with EcoR I and run on an agarose gel. Instead of a few sharp bands, the lane shows a continuous smear. A plasmid cut with EcoR I gave one sharp band. Explain the difference.
- 714 marks
Question 71
Four PCR tubes are set up and run for 30 cycles. Each tube has one change.
Tube Change 1 No change (complete mix with template DNA) 2 No template DNA added 3 Ordinary E. coli DNA polymerase used instead of the Thermus aquaticus enzyme 4 No deoxynucleotides added Predict the result in each tube, and explain.
- 723 marks
Question 72
NCERT suggests: "Better try to create a palindromic sequence by following base-pair rules."
(a) Complete the six-base palindrome 5'-AGA _ _ _-3' so that it reads the same on both strands in the 5'→3' direction. Write both strands.
(b) An enzyme recognises your sequence and cuts each strand between its first and second bases (A↓GATCT). If the site lies in the middle of a long DNA, write the ends of the two fragments produced, with polarity, and state the overhang.
(c) BamH I cuts G↓GATCC. Can a fragment from (b) be joined to one produced by BamH I? Explain.
- 735 marks
Question 73
The figure shows a stirred-tank bioreactor, with parts labelled P to X.

(a) Identify P, Q, R, S, T, U, V, W and X.
(b) During a run, three problems occur. Which part should be checked or adjusted for each, and why?
- (i) Froth builds up at the top and starts to overflow.
- (ii) The pH drifts, and the cells slow down.
- (iii) Cells at the bottom are short of oxygen.
(c) Why must the air delivered through R be sterile?
- 743 marks
Question 74
A company makes two recombinant products: (P) an enzyme for washing powder, and (Q) a human protein to be injected into patients.
(a) What does downstream processing include?
(b) Which of the two products will need the more demanding downstream processing and quality testing? Explain, using NCERT.
(c) Why is downstream processing not the same for every product?
- 755 marks
Question 75
A student's notebook records this cloning plan. Find five errors, and correct each.
- Isolate DNA from bacterial cells using cellulase, then remove proteins using protease.
- Precipitate the DNA by adding warm water.
- Join the gene and vector using DNA polymerase.
- Make the cells competent with calcium, then keep them at 42 °C for one hour.
- With a β-galactosidase marker, pick the blue colonies as the recombinants.
- 763 marks
Question 76
A foreign gene is ligated into a vector at a site inside the β-galactosidase gene. The vector also carries an ampicillin-resistance gene. After transformation, the cells are plated on a medium containing ampicillin and a chromogenic substrate: 180 colonies are blue and 20 are colourless.
(a) Why is there no colony of untransformed cells on the plate?
(b) Which colonies carry recombinant plasmids? Explain.
(c) What percentage of the colonies are recombinant?
- 775 marks
Question 77
A student wants to clone a gene into the BamH I site of pBR322, which lies within the tetracycline-resistance gene. She makes E. coli competent with calcium chloride, heat-shocks four samples in exactly the same way, and spreads each on agar containing ampicillin. The same amount of vector DNA is used for plates 2, 3 and 4.
Plate DNA mixed with the competent cells Colonies 1 No DNA 0 2 Uncut pBR322 400 3 pBR322 cut with BamH I, no ligase added 4 4 pBR322 cut with BamH I + the gene cut with BamH I + DNA ligase 120 (a) What do plates 1 and 2 together show about the host cells and the ampicillin selection?
(b) Plate 3 has only about 1% as many colonies as plate 2. Explain why, and suggest where its 4 colonies most probably came from.
(c) Why would this experiment fail if the host E. coli already carried an ampicillin-resistance gene of its own?
(d) Plate 3 suggests that some of her vector escaped cutting. (i) Before transforming, how could she have checked how far the BamH I digestion had gone, and what should she do if it was incomplete? (ii) If 5% of the vector used for plate 4 had escaped cutting, about how many of plate 4's 120 colonies would be expected to come from this uncut vector? Show your working.
- 785 marks
Question 78
A 1.2 kb gene with EcoR I ends is ligated into the single EcoR I site of a 4.3 kb plasmid. Plasmids from three transformed colonies are cut with EcoR I and run on a gel.
Colony Bands seen 1 4.3 kb only 2 4.3 kb and 1.2 kb 3 4.3 kb and 1.2 kb, with the 1.2 kb band twice as bright relative to its own 4.3 kb band as in colony 2 (a) Which colony has only the self-ligated vector? Explain.
(b) Which colonies are recombinant? What most likely happened in colony 3?
(c) Why do all three colonies show a 4.3 kb band?
(d) Towards which electrode did the bands move, and which moved farther?
- 795 marks
Question 79
A gene for disease resistance is introduced into cultured wheat cells by the gene gun. The cells show the new trait at first, but after several rounds of cell division, most descendant cells no longer carry the gene.
(a) Explain, using NCERT, why the gene was lost from the progeny cells.
(b) What must happen to the introduced DNA for it to be inherited by the progeny?
(c) Which step among NCERT's three basic steps of genetic modification has failed here?
(d) Once the gene is stably maintained, what must still be done before the wheat can express the trait usefully?
- 804 marks
Question 80
A company wants to produce a human protein in E. coli on an industrial scale.
(a) Outline, in order, the main steps from isolating the human DNA to obtaining the purified product.
(b) At which of your steps is each of the following used, and for what purpose?
- (i) chilled ethanol
- (ii) calcium chloride
- (iii) agarose gel
- (iv) a sparger
