(a) Compare the forces that try to drive the system, ignoring friction for the moment. B's weight pulls with mBg=50 N; the weight component of A down the plane is mAgsin37∘=50×0.6=30 N. The unbalanced drive is 50−30=20 N towards B's side, so B moves down and A moves up the plane.
Kinetic friction always opposes the sliding of A over the plane, so it acts down the plane. Its size:
NA=mAgcos37∘=50×0.8=40 N,fk=0.25×40=10 N
Since 10 N<20 N, friction cannot stop the motion, so the system does accelerate in this direction.
(b) Free-body diagrams:
- A: weight 50 N (vertically down), normal force 40 N (perpendicular to the plane), tension T up the plane, friction 10 N down the plane.
- B: weight 50 N down, tension T up.
Equations (taking each block's direction of motion as positive):
B:50−T=5a
A:T−30−10=5a
Adding: 10=10a, so a=1 m s−2.
T=50−5×1=45 N
Check with A: 45−40=5=5×1.
(c) v=at=1×2=2 m s−1 (A up the plane, B downward), and each block has moved 21×1×22=2 m.
(d) For constant velocity the net force on each block is zero, so the tension equals the hanging weight mg.
(i) A moving up the plane: friction acts down the plane, so T=30+10=40 N, giving a hanging mass of 4 kg.
(ii) A moving down the plane: friction now acts up the plane, so T=30−10=20 N, giving a hanging mass of 2 kg.
The two answers differ because friction reverses with the direction of sliding. (Whether the blocks would start from rest in these cases depends on the static coefficient, which is not given; the question concerns motion that is already under way.)