(a) Step 1→2 is isothermal at T1, so ΔU=0 and the heat absorbed equals the work done:
Q1=μRT1lnV1V2=0.50×8.31×500×ln3=2077.5×1.099=2283 J
(b) Step 2→3: T1V2γ−1=T2V3γ−1, with γ−1=0.4 and 1/0.4=2.5:
V3=V2(T2T1)2.5=6.0×(35)2.5=6.0×3.586=21.5 L
Step 4→1: T2V4γ−1=T1V1γ−1:
V4=V1(T2T1)2.5=2.0×3.586=7.17 L
Note that V3/V4=21.5/7.17=3.0=V2/V1.
(c) Step 3→4 is isothermal at T2; the heat given out equals the work done on the gas:
Q2=μRT2lnV4V3=0.50×8.31×300×ln3=1370 J
Over a cycle ΔU=0, so
W=Q1−Q2=2283−1370=913 J,η=2283913=0.400=40%
and 1−T2/T1=1−300/500=0.40. They agree because V3/V4=V2/V1, so the logarithms cancel and Q2/Q1=T2/T1 exactly.
(d) For an adiabatic step W=μR(Tinitial−Tfinal)/(γ−1):
W2→3=0.40.50×8.31×(500−300)=2078 J (done by the gas)
W4→1=0.40.50×8.31×(300−500)=−2078 J (that is, 2078 J done on the gas)
The two adiabatic steps run between the same two temperatures in opposite directions. The work on an adiabatic step of an ideal gas equals the fall in internal energy, μCvΔT, which depends only on the temperatures at its ends, so the two are equal and opposite. All the net work, 913 J, comes from the two isothermal steps.