(a) Using the lens formula with u=−30cm and f=+15cm:
v1−u1=f1⇒v1=151+−301=302−1=301
v=+30cmm=uv=−3030=−1
The screen must be 30cm from the lens, on the far side.
(b) The image is real (it falls on a screen), inverted (m is negative) and the same size as the slide (∣m∣=1).
The slide is loaded upside down precisely because the lens inverts it. Turning the slide over before it goes in means the two inversions cancel and the picture appears the right way up on the screen. (This object position, at 2f, is the one case where object and image are the same size and both sit at 2f.)
(c) He must move the slide closer to the lens — towards F — and move the screen further away.
From the lens formula, as u shrinks towards f, v1=f1+u1 gives a smaller v1 and hence a larger v; and since
∣m∣=∣u∣v
a larger v with a smaller ∣u∣ increases the magnification twice over. Moving the slide from 30cm to 20cm, for instance, puts the screen at 60cm and gives ∣m∣=3.
The limit is worth knowing. As the slide approaches F the image runs away towards infinity and becomes enormous — but also very dim and impossible to focus, because the light is spread over an ever greater area. Real projectors work a little way outside F for exactly this reason.