Concept used — enlargement gives similar figures. The rays from the bulb O spread out from one point, and the cardboard is parallel to the table, so the shadow P′Q′R′S′ is an enlargement of PQRS: the two quadrilaterals are similar. A scale factor of 1:3 means every length of the shadow is 3 times the matching length of the cardboard, while every angle stays the same:
P′Q′=3PQ,Q′R′=3QR,R′S′=3RS,S′P′=3SP,∠P′=∠P, …
(i) Option (B) is correct.
R′S′ corresponds to RS=3.4 cm:
R′S′=3×RS=3×3.4=10.2 cm
Answer: R′S′=10.2 cm — option (B).
(ii) Option (A) is correct.
Step 1 — Scale both sides.
P′Q′=3×2.5=7.5 cm,Q′R′=3×3.5=10.5 cm
Step 2 — Simplify the ratio.
Q′R′P′Q′=10.57.5=10575=75
Answer: P′Q′:Q′R′=5:7 — option (A).
Note: the factor 3 cancels, so this is the same as PQ:QR=2.5:3.5=5:7 — ratios of sides within a figure do not change under enlargement.
(iii) Option (B) is correct.
Corresponding angles of similar figures are equal, and ∠Q′ corresponds to ∠Q:
∠Q′=∠Q=95∘
Answer: ∠Q′=95∘ — option (B).
(iv) Option (B) is correct.
The question asks for the increase in R′S′, not its new length.
Step 1 — At scale factor 1:3.
R′S′=3×3.4=10.2 cm
Step 2 — At scale factor 1:5.
R′S′=5×3.4=17 cm
Step 3 — Subtract.
17−10.2=6.8 cm
Answer: R′S′ becomes longer by 6.8 cm — option (B).
Note: 17 cm (option D) is the new length, not the increase. Quick check: the factor grows by 5−3=2, and 2×3.4=6.8 cm ✓.
(v) Option (B) is correct.
Similarity keeps the shape and changes the size. So every angle is unchanged — ∠P′=115∘, ∠Q′=95∘, ∠R′=65∘, ∠S′=85∘ — but every length is multiplied by 3.
Option (A) fails: for example P′Q′=7.5 cm while PQ=2.5 cm.
Option (C) fails: the perimeter is a sum of lengths, so it is also multiplied by 3:
perimeter of PQRS=2.5+3.5+3.4+3.1=12.5 cm,perimeter of P′Q′R′S′=3×12.5=37.5 cm
Answer: the measure of each angle is the same — option (B).